We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Replacement inner tub spin basket for washers. Holds clothes during wash and spin cycles. Replace if cracked, rusted, porcelain coating damaged, or worn.
Replaced the Inner Tub Basket. We watched the video, ordered the parts, and swapped out the basket in a breeze. We were very surprised, and pleased, with how easy the repair was. This saved me labor costs not having to hire a repairman, and, worst case scenario, saved me from having to buy a new washing machine. Read more
Outer tub assembly holds wash water and houses the inner basket in top-load washers. Replace if cracked, leaking, or damaged during repairs.
Got all required parts and completed the job in 3 or 4 hours. Read more
Replacement dryer drum assembly for laundry centers. Restores the rotating drum that tumbles clothes. Order when your drum is cracked, warped, or damaged.
This bulkhead is the front tub housing that supports the washer drum and seals the washer cabinet to help contain water. Replaces a cracked or corroded housing to restore proper drum alignment and help prevent leaks. What it does:
Outer tub assembly for washer dryer combos. Houses the spin basket and holds water during wash cycles. Replace if cracked, leaking, or damaged.
This is the main drum assembly for a dryer, the large cylindrical chamber where clothes tumble during the drying cycle. It rotates to circulate garments through heated air for even drying. Replace this drum if it has developed cracks, dents, worn spots that snag clothing, or if the interior coating is peeling or damaged.
I opened the top of the dryer and found the seam had broken as well as the tub was cracked. This unit is only three years old. I tried first by grinding the seam down a little but to no avail. I ordered the drum from applianceparrtspros,.com and within two days had the part delivered to my front door. i found a video on the exact repai on you tube and one hour later had a quiet running dryer. Thnaks appliancepartspros.com Read more
Replaces a cracked, damaged, or chewed-up outer tub that no longer properly contains water or supports the inner basket during wash and spin cycles.
The main problem was fixing the inner tub. The "Spider Assembly" is attached with six screws, but the manufacture does not supply this as an individual part. This is good since the manufacture has a lifetime warranty in the inner tub. The manufacture supplied the inner tub. I purchased the outer front tub from Appliance Parts Pro. A fair price and excellent delivery time provided me with a quick up and run time to complete this repair. Read more
Replacement outer tub assembly for washers. Installs as the main water-holding drum. Replace if cracked, corroded, or damaged. Includes bearing housing.
The bearing is molded into the outer tub. Th process is not complicated but does take about two hours. The most difficult part of the process was filing information on opening the top of the washer. Some information says to use a putty knife an push in to release the catch but on the version we have you need to unbolt two sheetmetal screws in the back, pull forward on the top and lift up. You only need to remove the top two screws in the back. When putting the top back on make sure you have... Read more
Replacement dryer drum front bulkhead panel. Installs at the front of the drum assembly. Needed when cracked, warped, or damaged from wear.
Main housing that encloses the wash basket and holds the drum bearings. Replace when cracked, leaking, or when bearings are worn and cannot be serviced.
This repair went exactly as the video described. The video made it unbelievably easy. Took about 2.5 hours only because I scrubbed and cleaned all hoses and pars in and out. Our washer is 12 years old and had some build up. Seriously don't shy away, this was $250 with a new belt. Compared to a new front loader $1200-$1500, repairs the way to go. My only scare or concern was that the inner basket spider was rotten (galvanic corrosion (dissimilar metals) however it was just dirty. Tips 1. The... Read more
This front bulkhead is the large panel that forms the front wall of the dryer drum compartment and supports the drum as it rotates. It typically includes the opening where clothes are loaded and may include a felt seal to prevent air leaks. Replace this bulkhead if it is warped, cracked, or if the drum seal surface is damaged - symptoms include unusual noises, clothes getting caught between the drum and panel, or heat escaping from the front of the dryer.
The Bulkhead is an OEM component for Whirlpool dryers. As a structural panel, it secures the rear of the appliance while enabling airflow behind sliding doors.
Formed from durable composite, the lightweight bulkhead installs easily into precise slotted tracks inside the chassis. This allows full retraction during maintenance without removing additional panels.
Causes of a faulty bulkhead can include cracked welds or screws stripping their anchors from extreme force vibration over many years of use.
Causes of a bad bulkhead can include:
Replace yours with this genuine Whirlpool bulkhead to restore smooth, tight operation. Compatible with Kenmore, Maytag, and KitchenAid dryers.
Front bulkhead panel that supports the dryer drum and seals the cabinet. Replace if cracked, warped, or damaged to restore drum alignment and airflow.
This is the complete drum assembly for a dryer, including the cylindrical tumbling chamber where clothes are placed for drying. It rotates during the drying cycle to tumble laundry through heated air. Replace this assembly if the drum is cracked, warped, has damaged baffles, or if clothing is snagging or tearing during the drying cycle.
Replaces cracked, corroded, or broken inner drum assembly in your washer. Includes perforated basket, spider support, and lifters as one unit.
This was the 2nd time my husband and I had to replace the bearings in just over a year. This time we decided to replace the spider because of the corrosion on the shaft which goes through the water seal. I believe we had the corrosion on the last repair but wasn't informed enough to realize to check for this. Again the job took us days, it's a straight forward job but there are times you have problems, such as pounding the shaft out of the bearings. We had to soak overnight and still had to... Read more