Actuator Ptc Parts

Compressor won't start or runs intermittently? This start relay and overload helps the motor get up to speed so your refrigerator runs reliably again.

Electrical wiring harness that routes power between dryer components. Replaces damaged, frayed, or corroded harnesses with broken connectors or melted wires.

This compressor overload is a thermal/protective device that helps prevent compressor damage by cutting power when the motor overheats or draws excessive current. It restores normal operation once conditions return to safe levels. What it does:

• Protects the refrigerator compressor from overheating and electrical overloads
• Works with the compressor start relay to help the motor start and run properly
• Common symptom linkage: replaces a failed overload when the compressor hums but won't start
• Stops compressor cycling or prevents repeated trips that cause cooling loss

• One compressor overload (single piece as shown)

• Disconnect all power before replacing to avoid shock or injury
• Handle terminals carefully and reconnect matching terminal positions
• Replace only with the same part number or equivalent
• If compressor still won't start after replacing the overload, check the start relay and compressor condition.

Fix a refrigerator that won't cool or start. This compressor start relay helps your compressor run reliably and prevents clicking sounds. Easy DIY repair.

Fix a clicking fridge that won't cool with this compressor overload protector. Protects motor from overheating damage. Simple 10-15 minute DIY repair.

This small foam pad cushions and insulates appliance components to reduce vibration, noise and wear. It helps protect wiring, housings and panels from rubbing or metal-to-metal contact for quieter, longer-lasting operation. What it does:

• Cushions components to reduce vibration and rattling during operation
• Prevents direct metal-to-metal contact that can cause wear or damage
• Provides light thermal insulation and protects wiring or hoses from chafing
• Helps stabilize panels or assemblies for a quieter appliance

• Disconnect power to the appliance before attempting any service.
• Locate the worn or missing pad and remove any residue or debris from the mounting surface.
• Press or stick the new pad into place; some installations may use adhesive—use suitable adhesive if needed.

Dryer won't start when door closes? This push-button door switch detects when the door is open or closed, restoring proper operation. Simple fix.

This is a compressor overload protector that prevents the compressor motor from overheating by cutting power when excessive current or temperature is detected. It attaches directly to the compressor and is a critical safety component. Replace this part if the compressor fails to start, cycles on and off repeatedly, or if the refrigerator stops cooling entirely.

Refrigerator clicking but not cooling? A failed compressor overload protector prevents the compressor from starting. This part restores normal operation.

Guardette (right) is a replacement right-side protective guard used on select GE refrigerators. It restores the interior guard/trim that protects components and helps keep the cabinet interior aligned for smooth door and shelf operation. What it does:

• Replaces a cracked, broken or missing right-side guard to restore proper coverage and protection
• Shields interior wiring and components from contact and everyday wear
• Helps prevent items from catching on damaged trim and reduces rattles or misalignment
• Matches OEM fit and mounting points for a straightforward replacement on compatible units

• Disconnect power to the appliance before starting any repairs
• Removal may require gently prying or unsnapping the old guard; use a trim tool to avoid damage
• Align mounting tabs and press firmly until the replacement snaps into place
• If fasteners are present, tighten by hand to avoid cracking plastic

This solenoid actuator is the electromechanical device that moves a latch or linkage when energized, restoring the appliance's intended mechanical action. It provides a direct replacement to re-enable reliable actuation. What it does:

• Converts electrical signal into a mechanical push or pull to operate a latch, door, dispenser or linkage
• Commonly used where a timed or motor-driven movement is needed during a cycle
• Symptoms this part can cause: appliance fails to actuate a door, latch, dispenser or similar mechanism when called for
• Replacing a worn or failed actuator restores proper mechanical response to control signals

• One solenoid actuator

• Disconnect power to the appliance before beginning work to avoid shock or unintended actuation
• Remove any panels or trim as needed to access the actuator; note wire and mounting locations for reassembly
• Reconnect wiring and test the function on a short cycle after installation

Broken selection knob or exposed switch opening? This dryer finish guard covers and protects the control switch area. Moderate difficulty repair.

Motor won't start or keeps shutting off? This refrigerator overload protector stops the motor when it overheats, preventing damage and unsafe operation.

Fix a refrigerator that won't cool or clicks without starting. This PTC starter relay helps the compressor engage properly. DIY repair in under 30 minutes.

Dryer not heating properly or overheating? This temperature switch regulates heat levels to restore safe, effective drying. Simple DIY repair.

Wire harness assembly that routes power and control signals between dryer components. Replace if wires are damaged, worn, broken, or connections are loose.