Run Vent Push Button Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11044559
The Pressure Switch Hose is an OEM part for Whirlpool washing machines. This hose connects the pressure switch to the washer tub, allowing the machine to detect water levels and ensure proper operation of the washing cycle.
Common causes of damage include cracks, holes, or clogs in the hose, which can occur due to wear and tear, exposure to harsh detergents, or foreign objects in the washing machine.
Symptoms of a bad pressure switch hose include:
- The washing machine not filling properly
- Overfilling or underfilling of water
- Error codes related to water levels
- The washer not advancing through cycles correctly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our 3 year old whirlpool front load washer overfilled and when door unlocked during the cycle the door opened and flooded our floor Robert B. • Blanchardville , WI • August 27, 2016
After watching a number of videos and reading a lot of trouble-shooting discussions online I had ideas of what to look for as possible causes of the overfilling of the drum. I found the water level pressure hose had worn through after contacting the rotor. After temporarily taping the hose, I found the service manual inside the machine so I ran it through it test sequences without any error codes. Suggesting the hose and not the sensor or inlet valves were the problem.
I ordered parts last...
Read more
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2252265
Replacement button for refrigerator ice bin door release mechanism. Installs on freezer door ice bucket. Needed when button breaks, cracks, or falls out.
Do-It-Yourself Stories from Customers like You
Broken plastic part from pushing too hard Adele W. • Walnut Creek , CA • October 03, 2014
Replaced it
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10487697
Fixes intermittent or erratic speed control on stand mixers. This electronic board regulates motor power for accurate, steady speeds across all settings.
Do-It-Yourself Stories from Customers like You
Intermittent speed control on kitchenaid 7qt stand mixer Anthony C. • Westminster , CO • November 26, 2014
Unplug the unit from power.
Remove decorative aluminum band from motor enclosure by removing single screw at rear of mixer.
Remove screws (now exposed) which secure the top half of the motor enclosure.
Using a 1/8" punch, tap-out the pin that penetrates the planetary gear cover and the motor shaft (takes some finesse to avoid damage to the painted/coated planetary. It is a tight fit!) This will allow the planetary gear and cover to drop.
Now the motor and gear unit can be removed. Do so...
Read more
More
$135.62
- Compare At:
-
$160.03
- You Save:
-
$24.41
Genuine Bosch part
By: Bosch
Part Number: 00611665
Dishwasher overflowing or not filling properly? The float switch monitors water levels and prevents overflow. Watch our video for step-by-step help.
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Lg part
By: Lg
Part Number: ABT35083801
The Blower Motor Assembly is an OEM replacement part for LG dishwashers. Located inside the wash cavity, it functions to distribute heated air throughout during the dry cycle. Rapid rotation of the blower motor blades works to eject moisture from dishes and ensure thorough drying.
Causes of a bad blower motor include failure of the motor itself, cracks in the blades that disrupt airflow, or bearing issues preventing proper rotation.
Symptoms include:
- Dishes still feeling damp after a cycle
- Puddles of water remaining in the bottom of the dishwasher
- Water droplets on upper racks/dishes
- The motor producing grinding/squealing noises on startup
It is also compatible with some Kenmore dishwashers using LG components.
This part fixes the following symptoms
-
Not drying dishes properly
See more...
Do-It-Yourself Stories from Customers like You
Water leak Art D. • Souderton , PA • May 27, 2014
The solenoid that opened the air vent for drying was broken so it was open during the wash cycle allowing water to escape into the air duct.
Found the part at SearsParts and AppliancePartsPro, and Sears was $15 more expensive. I ordered on Friday from AppliancePartsPro and selected standard shipping and the part arrive the next day (Saturday). Amazing service. AppliancePartsPro will be my first stop in the future.
Read more
More
$150.43
- Compare At:
-
$179.01
- You Save:
-
$28.58
Genuine Ge part
By: Ge
Part Number: WB03X24965
Replacement control knob for electric range surface burners. Attaches to infinite switch to control heat settings. Needed when original is cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Control knob broke while moving and large burner only stayed on high Mary S. • Sarasota , FL • May 11, 2026
Bought new knob and infinite controller
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Ge part
By: Ge
Part Number: WE01X22616
The Knob Control Assembly is an OEM part for GE dryers. It enables users to select the desired settings and cycles by turning the knob to the appropriate position on the control panel.
Causes of a bad knob control assembly can include frequent use leading to wear and tear, accidental impacts that cause cracking or breaking, or internal mechanisms becoming stripped or damaged. Additionally, exposure to moisture or excessive force can also contribute to its failure.
Symptoms of a bad knob control assembly include:
- Difficulty in turning the knob
- Knob slipping or not staying in place
- Inability to select or change cycles
- Cracks or visible damage to the knob
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Plastic shaft on dryer timer rounded required replacement to function Norbert G. • Hempstead , NY • July 14, 2025
Easy fix, first I unplugged the dryer. Then removed the 6 Philips head screws on head unit back panel. Photographed wiring on timer. Removed the 1 torx screw holding the timer assy in place, the front panel knob was already off, would no longer stay on. Removed the wires from the timer assy, removed the timer, replaced it with new one, reinstalled torx screw. Reattached the wires to the positions removed from. Pressed the new knob on the shaft at front panel, tested it functioned and in the...
Read more
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Ge part
By: Ge
Part Number: WH12X10479
Fix a washer that won't fill properly or overfills with this water level pressure switch. Common when load size selector fails. 20-minute repair.
Do-It-Yourself Stories from Customers like You
Water level pressure switch failed Larry P. • Colorado Springs , CO • November 13, 2015
Removed fill level pressure switch knob. Removed three screws from the back of the control panel.Opened the control panel and removed electrical connector and plastic tube from the pressure switch. Removed and replaced pressure switch. Placed control panel to correct position and replaced the three screws.
Read more
More
$53.32
- Compare At:
-
$62.92
- You Save:
-
$9.60
Genuine Bosch part
By: Bosch
Part Number: 00189968
The Vent Switch is an OEM replacement part for Bosch range hoods. It is an electronic control device located inside the range hood that regulates the internal vent and fan functions.
Causes of a faulty vent switch can include long-term use in high-heat cooking environments, damage from accidental spills or impacts, or normal component degradation over time.
Symptoms include:
- Failure of the fan or vents to engage during cooking
- Variable or inconsistent fan speeds that don't adequately vent smoke
- Electrical shorting or sparking noises from within the hood control unit
This genuine Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
Do-It-Yourself Stories from Customers like You
Thermador cvs36r cook'n'vent vent won't go down Martha M. • Los Altos , CA • January 17, 2015
I replaced the switch
Read more
More
$132.31
- Compare At:
-
$158.77
- You Save:
-
$26.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10301588
Control knob for cooktop burners. Installs on the control panel to adjust heat levels. Replace if cracked, broken, loose, or missing for proper operation.
Do-It-Yourself Stories from Customers like You
Replacement of cool knobs John Q. • Houston , TX • April 22, 2025
Replaced control knobs.
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10316662
Black control knob for cooktop burner heat adjustment. Replaces broken, cracked, or missing knobs. Installs on the control panel for precise cooking.
Do-It-Yourself Stories from Customers like You
The burner on a Whirlpool cook top went to high heat and stayed there once the knob was turned on for the burner. Turning the knob to a lower setting did not lower the heat Jim W. • Houston , TX • June 17, 2019
Had to replace the switch for the left rear burner on a Whirlpool cooktop Model W5CE3625AB00. I turned off the circuit breaker for the cooktop and lifted it out of the countertop. It was simply held down by its own weight. There were approximately a dozen screws holding the smooth surface down onto the rest of the unit. I removed those screws, which allowed the cooking surface to lift back on a hinge in the back of the unit. Two of those screws were stripped, but I was able to remove them...
Read more
More
$25.76
- Compare At:
-
$30.65
- You Save:
-
$4.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 297243800
This door-activated light switch controls the interior lamp in your refrigerator or freezer. Replace it to restore dependable on/off lighting when the door opens and closes and prevent a light that stays on and warms the compartment.
- Activates the interior light when the door opens and switches it off when closed
- Helps resolve no interior light, light staying on, or a broken/stuck switch plunger
- Restores reliable visibility inside the compartment
- Direct replacement for the original switch connection
What's included: One light switch Install notes:
- Disconnect power before servicing
- Release the switch from the liner and gently pull it out
- Transfer wires to the new switch one at a time to maintain correct connections
- Seat the switch flush; restore power and verify the light turns off when the door closes
Do-It-Yourself Stories from Customers like You
Bad door switch prevented light from working when opening door Thomas C. • Sarasota , FL • October 05, 2014
Ordered light switch and it arrived the following day with standard shipping! That was FAST!!
Removed old swich, installed new, only 2 wire switch, very easy.
I was very impressed with the 1 day delivery
Read more
More
$19.32
- Compare At:
-
$22.99
- You Save:
-
$3.67
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339326
Fix a washer that overfills, won't fill enough, or stops filling mid-cycle. This water level pressure switch regulates tub fill. DIY repair in 30 minutes.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate and would not fill water Jennifer B. • Kingston , NH • March 13, 2016
At first, I thought, maybe I should just get a new washing machine. After all, it is almost 20 years old! I couldn't bring myself to do that and said to myself, let me see if I can figure out what parts I need and see if I can find a video that tells me how to do it and see how hard it is. I’ve never attempted appliance repair before. After figuring out what the most likely parts were, I ordered the water level switch and agitator cam repair kit - I figured for $10 more, I might as well...
Read more
More
$69.95
- Compare At:
-
$83.24
- You Save:
-
$13.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761048
If your dual burner is stuck on high or won't adjust temperature, this infinite switch is likely the cause. Easy DIY repair takes under an hour.
Do-It-Yourself Stories from Customers like You
Burner was stuck on high William M. • Mountaintop , PA • June 23, 2014
Replaced dual element switch.
Fixed the problem.
All is good
Read more
More
$120.56
- Compare At:
-
$143.47
- You Save:
-
$22.91
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293825
If your burner won't turn off or stays on high heat, this surface burner switch restores proper temperature control. Straightforward 30-minute repair.
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$73.95
- Compare At:
-
$88.00
- You Save:
-
$14.05
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337781
The Water Level Switch is an OEM replacement part for Whirlpool washing machines. It monitors and controls the amount of water that fills the drum during each wash cycle. By ensuring the appropriate water level, it aids in the efficient and effective cleaning of laundry while conserving water.
Symptoms of a bad Water Level Switch include:
- The washing machine overfilling or underfilling with water
- Inconsistent or erratic water levels during cycles
- The machine failed to progress from filling water to the wash cycle
- Error codes or indicators related to water levels or filling
Causes for a malfunctioning Water Level Switch can include electrical issues affecting signal transmission, mechanical failures within the switch, or blockages in the pressure hose connected to the switch.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water level of washing machine was stuck on extra small Stuart D. • Burke , VA • April 13, 2014
I replaced the assembly behind the water level knob.
I watched the video on appliancepartspros.com before starting, and then watched it again in short portions while going thru the repair process.
Read more
More
$118.53
- Compare At:
-
$141.05
- You Save:
-
$22.52