Power Strike Small Engine Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387913
Refrigerator not cooling or freezing? A faulty start relay prevents the compressor from running. This kit fixes humming compressors in about 20 minutes.
This part fixes the following symptoms
-
Won't start
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Refrigerator was not cooling Dennis L. • Mount Wolf , PA • October 31, 2016
Took access panel off the back of the refrigerator with 1/4 inch nut driver and found that the compressor was not running properly (humming and hot but not compressing). The compressor cooling fan was working as well as the fan in the freezer compartment.
I fixed the same problem with another refrigerator by replacing the relay and start capacitor on the compressor. I pulled these two items from the compressor connector (gently pry the brown part from the comp terminals first and then the...
Read more
More
$55.30
- Compare At:
-
$66.36
- You Save:
-
$11.06
Genuine Ge part
By: Ge
Part Number: WH12X10479
Fix a washer that won't fill properly or overfills with this water level pressure switch. Common when load size selector fails. 20-minute repair.
Do-It-Yourself Stories from Customers like You
Water level pressure switch failed Larry P. • Colorado Springs , CO • November 13, 2015
Removed fill level pressure switch knob. Removed three screws from the back of the control panel.Opened the control panel and removed electrical connector and plastic tube from the pressure switch. Removed and replaced pressure switch. Placed control panel to correct position and replaced the three screws.
Read more
More
$54.49
- Compare At:
-
$64.84
- You Save:
-
$10.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10487697
Fixes intermittent or erratic speed control on stand mixers. This electronic board regulates motor power for accurate, steady speeds across all settings.
Do-It-Yourself Stories from Customers like You
Intermittent speed control on kitchenaid 7qt stand mixer Anthony C. • Westminster , CO • November 26, 2014
Unplug the unit from power.
Remove decorative aluminum band from motor enclosure by removing single screw at rear of mixer.
Remove screws (now exposed) which secure the top half of the motor enclosure.
Using a 1/8" punch, tap-out the pin that penetrates the planetary gear cover and the motor shaft (takes some finesse to avoid damage to the painted/coated planetary. It is a tight fit!) This will allow the planetary gear and cover to drop.
Now the motor and gear unit can be removed. Do so...
Read more
More
$135.62
- Compare At:
-
$161.39
- You Save:
-
$25.77
Genuine Speed Queen part
By: Speed Queen
Part Number: 203573
Fix a washer lid that won't latch or lock during cycles with this lid lock catch assembly. Simple DIY repair requiring basic tools and screwdriver.
Do-It-Yourself Stories from Customers like You
The top of my speed queen had rushed really badly it was staining my clothes Sue T. • Wilmington , NC • February 28, 2026
My son-in -law replaced the entire lid and top along with the lid lock and safety lock on the lid. He has pictures of the process
Read more
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W11291138
Refrigerator light won't turn on or off when opening the door? This door light switch controls interior lighting. DIY repair in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Interior light on refrigerator was flashing Billy R. • Reedsport , OR • February 28, 2020
Replaced light switch. That did not work, problem was in led lights.
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10391743
Fix burners stuck on high heat or won't adjust temperature with this infinite switch. Common issue with multi-ring burners. Easy DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
$89.31
- Compare At:
-
$107.17
- You Save:
-
$17.86
Genuine Whirlpool part
By: Whirlpool
Part Number: W11123943
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
The refrigerator would not make ice or dispense water or ice. Ken W. • Aurora , CO • June 15, 2022
Part easily replaced and problem was solved. Saved service call.
Read more
More
$28.43
- Compare At:
-
$33.83
- You Save:
-
$5.40
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316246
Fix a washer that overfills or won't fill properly with a water level pressure switch. Monitors water levels during wash cycles. DIY repair.
More
$80.95
- Compare At:
-
$97.14
- You Save:
-
$16.19
Genuine Ge part
By: Ge
Part Number: WE4M80
This replacement part is a high-limit thermostat, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This high-limit thermostat is typically found in dryers and controls the heat inside the drying tub. This is especially important as different dryer settings require different amounts of heat. If the high limit thermostat works properly, the temperature inside the tub should reach the correct amount during each drying cycle with no issues. A new high-limit thermostat might be needed if the user notices that the dryer is unable to reach the appropriate level of heat for a certain drying cycle. This is also true if the dryer is becoming too hot when the heat is supposed to be set to low. Make sure the dryer is cooled down prior to replacing this part as the areas in the back of the dryer can become very hot during use. Be sure to reference the specific user manual for more instructions on how to replace the thermostat. This thermostat is sold individually and is a genuine OEM part. The thermostat is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
No heat Roland J. • Hawthorne , NJ • May 11, 2015
Replaced thermal stats
Read more
More
$56.95
- Compare At:
-
$68.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195934
Fix F5-E1 errors or doors that won't stay closed with a new door latch assembly. Solves latch cycling issues and false door-open warnings.
Do-It-Yourself Stories from Customers like You
Said door was open even when it was close Connie S. • River , KY • August 11, 2016
Replaced the latch. Everything works fine now
Read more
More
$160.95
- Compare At:
-
$193.14
- You Save:
-
$32.19
Genuine Bosch part
By: Bosch
Part Number: 00189968
The Vent Switch is an OEM replacement part for Bosch range hoods. It is an electronic control device located inside the range hood that regulates the internal vent and fan functions.
Causes of a faulty vent switch can include long-term use in high-heat cooking environments, damage from accidental spills or impacts, or normal component degradation over time.
Symptoms include:
- Failure of the fan or vents to engage during cooking
- Variable or inconsistent fan speeds that don't adequately vent smoke
- Electrical shorting or sparking noises from within the hood control unit
This genuine Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
Do-It-Yourself Stories from Customers like You
Thermador cvs36r cook'n'vent vent won't go down Martha M. • Los Altos , CA • January 17, 2015
I replaced the switch
Read more
More
$132.31
- Compare At:
-
$157.45
- You Save:
-
$25.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 137353300
This washer door lock secures the door closed and communicates locked status to the control so cycles can run safely. Replacing a failed lock restores proper latching and may resolve no-start, spin, or door/lock error issues.
- Locks the door at the start of the cycle to prevent opening during wash and spin
- Signals the control when the door is closed and locked
- Releases the door at the end of the cycle
- Common symptoms: won't start, door won't lock/unlock, intermittent pauses, door/lock error message
What's included: One door lock assembly Install notes:
- Unplug the washer before servicing
- Access the lock from the front; remove the door gasket clamp and mounting screws (procedure varies by model)
- Transfer wires to the new lock one connector at a time; do not force terminals
- Verify the door striker engages smoothly and test an empty cycle before full use
Do-It-Yourself Stories from Customers like You
Our washer was randomly stopping, in some not all cycles with weight on the lid some cycles could finish. Michael H. • Reading , PA • March 28, 2022
Replacing the cycle switch and the lid switch, resolved the issues! Our washer operates like new again. From receipt of the parts to the first wash. The replacement of the parts took less than 20 minutes! Savings over the purchase of a new washer dryer combo: $1700-2200!
Read more
More
$79.95
- Compare At:
-
$94.34
- You Save:
-
$14.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W10335056
Washer not filling properly or overfilling? A faulty water level pressure switch fails to signal correct fill levels. DIY repair in about 1 hour.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine wouldn't fill water to the correct level it filled as if it were set to "small load" every time Jessica A. • Baltimore , MD • April 13, 2014
I took the washer apart and replaced the water level switch and hose with new ones. I followed the video that I found on youtube (which is on the site) and had no problems at all.
Read more
More
$62.46
- Compare At:
-
$73.70
- You Save:
-
$11.24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337781
The Water Level Switch is an OEM replacement part for Whirlpool washing machines. It monitors and controls the amount of water that fills the drum during each wash cycle. By ensuring the appropriate water level, it aids in the efficient and effective cleaning of laundry while conserving water.
Symptoms of a bad Water Level Switch include:
- The washing machine overfilling or underfilling with water
- Inconsistent or erratic water levels during cycles
- The machine failed to progress from filling water to the wash cycle
- Error codes or indicators related to water levels or filling
Causes for a malfunctioning Water Level Switch can include electrical issues affecting signal transmission, mechanical failures within the switch, or blockages in the pressure hose connected to the switch.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water level of washing machine was stuck on extra small Stuart D. • Burke , VA • April 13, 2014
I replaced the assembly behind the water level knob.
I watched the video on appliancepartspros.com before starting, and then watched it again in short portions while going thru the repair process.
Read more
More
$118.53
- Compare At:
-
$141.05
- You Save:
-
$22.52
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406102
Dryer won't start or runs with door open? The door switch is often the culprit. This safety switch ensures operation only when closed. DIY-friendly, takes 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Door switch on dryer was not working dryer would continue to run when the door was opened Jeff W. • Knoxville , IA • September 04, 2015
Simple unplug, unscrew and replace.
Read more
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Bosch part
By: Bosch
Part Number: 00424410
Fix a dishwasher that won't power on or reset with this on/off switch. Replaces worn or moisture-damaged switches. DIY-friendly installation.
Do-It-Yourself Stories from Customers like You
The switch stopped working Kirk B. • Pelham , AL • March 24, 2014
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I...
Read more
More
$62.68
- Compare At:
-
$73.96
- You Save:
-
$11.28