Compressor Start Relay Overload Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002784
Fixes clicking noise from compressor and fridge not cooling. Includes relay, overload protector, and capacitor. Most DIYers complete in 20-30 minutes.
This part fixes the following symptoms
-
Freezer section too warm
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Cooling dropped off in the fridge but the freezer was still working then freezer temps dropped David H. • Colorado Springs , CO • September 19, 2014
Thawed out the evap/heat exchanger assembly, replaced the overload/relay kit as well as the defrost control board and the fridge was back in business, everything working fine.
I'm kicking myself for not ordering these parts earlier. there was a clicking sound coming from the compressor that I ignored which was a huge mistake.
Read more
More
$102.32
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002794
Refrigerator making clicking sounds and not cooling? This overload relay kit fixes compressor start problems. Easy DIY repair—pull off old relay and install.
Do-It-Yourself Stories from Customers like You
My compressor relay on my refrigerator failed Jared W. • Mchenry , IL • February 19, 2015
I was able to pull off the old relay and swap out with the new relay. Everything went together perfectly.
Read more
More
$111.44
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Speed Queen part
By: Speed Queen
Part Number: 203935
Fix a washer that won't start or respond to controls with this switch assembly. Restores electrical switching in control and safety circuits.
More
$10.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304468224
Do-It-Yourself Stories from Customers like You
The micro switch on the door clasp failed second time in 10 years John P. • Mcdonough , GA • June 23, 2018
Checked on AppliancePartsPros and found the parts, once I received the parts I pulled the outer cover of the microwave and replaced the three switches. For the price of the three switches it was cheaper to install all new. Total repair time, 15 minutes. Microwaves back up and running.
Very easy fix.
Read more
More
$66.55
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 8203536
Burner stuck on high or dual element not working? This infinite switch controls heat levels. Moderate DIY; transfer wires one at a time carefully.
Do-It-Yourself Stories from Customers like You
The "infinite switch control" failed on the 1000/2400 watt dual element burner causing both elements to turn on when single was selected Eddie K. • Edmonds , WA • March 18, 2016
Turned OFF the CIRCUIT BREAKER for the RANGE at home electric control panel. Checked RANGE to verify power to entire RANGE was OFF by observing that control panel and OVEN lights were OFF and no burner operation. Covered GLASS COOKTOP of range with cardboard or other protective material to avoid accidental breakage during repair. Removed knob from infinite control switch by firmly pulling UP. Carefully removed switch retaining nut and insulating washer, by using an adjustable wrench. Removed...
Read more
More
$104.40
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WD21X479
This float switch detects rising water in the refrigerator drain pan or lower cabinet area and signals the appliance control to help prevent overflow and water damage. Use it to replace a failed or intermittent water-level sensor. What it does:
- Senses high water level in the drain pan or collection area and closes the circuit to alert the control.
- Helps identify causes of leaks and pooling under or behind the appliance.
- Commonly used when symptoms include water on the floor, drip pan overflow, or water-related error/alert conditions.
- Matches OEM function for refrigeration units that include a float-based water-detection circuit.
What's included: One float switch. Install notes:
- Disconnect power to the appliance before starting any repairs; shut off the water supply if working near water lines.
- Access may require removing lower kick plate or back panel; handle plastic clips and fasteners carefully.
- Disconnect electrical connector gently and note orientation before installing the replacement; secure wiring and verify float moves freely.
- Restore power and run a short test cycle or simulate water level to ensure proper operation.
Do-It-Yourself Stories from Customers like You
The dish washer was not fill with water Stanley B. • Newberry Springs , CA • December 14, 2014
1. Removed the water inlet/shut off valve, removed and cleaned the screen. while the valve was removed applied electrical power to the valve and it worked just fine.
2. replaced the broken float switch.
Read more
More
$20.38
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3362987
Washer won't fill or overfills? Water level pressure switch senses tub water and controls fill cycles. Restores accurate fill levels and agitation.
Do-It-Yourself Stories from Customers like You
No agitation Paul S. • East Calais , VT • August 08, 2016
Initially suspected timer, but it did advance during some cycles. the schematic on the unit and other input on this site helped to confirm that the water level switch was at fault
Read more
More
$113.46
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8543274
Dryer won't start when you press the button? This push-to-start switch closes the circuit to begin cycles. Easy DIY repair restores reliable starting.
Do-It-Yourself Stories from Customers like You
Start switch replacement George Z. • Sebastian , FL • December 14, 2020
I have an old dryer. My wife wanted a new washer and dryer but I keep repairing the old ones. Not because I have to, but because I want to, it's personal now. Can't let my old dryer beat me down. We have pushed that old Start-Stop switch so many times it just wore out. Bing-bang-boom...it was simple.
Read more
More
$56.34
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: A00056506
This switch assembly restores electrical on/off control for a specific appliance function. Replace a worn or failed switch to stop intermittent operation and return reliable control to the affected circuit. What it does:
- Provides the electrical on/off or function control for the appliance circuit.
- Replaces a failed switch that can cause intermittent operation or unresponsive controls.
- Helps resolve symptoms such as a function that won't start, no response from the control, or erratic switching.
- Connects to the existing wiring harness and mates with the original mounting points.
What's included: One switch assembly. Install notes:
- Disconnect power to the appliance before beginning any work.
- Remove the appropriate access panel to reach the switch; note wire and terminal locations before disconnecting.
- Unplug the wiring harness or carefully detach terminals, swap the switch assembly, then reconnect securely.
- Restore power and verify the replaced switch operates the function correctly.
More
$28.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: EBF61734701
This micro switch is a compact, snap-action electrical switch that sends an on/off signal when a lever, latch, or paddle is moved. Replacing a worn switch restores reliable detection and control response for the affected function.
- Converts mechanical movement into an electrical open/close signal to the control
- Commonly used for lever/paddle actuators, latches, or interlock detection within the appliance
- Safe symptom clues: no response when actuated, intermittent operation, or a function stuck on/off
- Physical clues: weak or absent "click" when pressed, heat discoloration or damage at terminals
What's included: 1 micro switch
- Disconnect power before servicing; if the product is connected to a water line, close the supply valve
- Note wire positions and terminal labels (COM/NO/NC); transfer wires one at a time to matching terminals
- Match the actuator orientation and mounting position to the original for proper operation
- After installation, verify continuity with a multimeter and test function before reassembly
Do-It-Yourself Stories from Customers like You
Sensor on dryer and refridgeator bad Perry S. • Jackson , TN • November 14, 2015
Take section applicable apart, test and replace parts.
Read more
More
$21.72
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE4M406
Dryer won't shut off in auto dry or only heats on one setting? This temperature switch restores proper heat level control. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Temperature switch wasn't working on medium and high Thomas H. • Coquille , OR • January 19, 2017
Replaced temp switch
Read more
More
$90.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3148955
Fix a burner that won't turn off, stays on high, or won't heat. This infinite switch restores precise temperature control for electric cooktop elements.
Do-It-Yourself Stories from Customers like You
Electric burner control switch William F. • Teutopolis , IL • March 08, 2017
Turn the power off to the range. Pull off the black control knob. Remove 6 - 5/16 screws in back of the range behind the controls panel. Take out 2 screws (behind the control knob) in front that hold the control swirch in the panel. Remove each wire from the old switch and place it onto the new switch (one at a time)so get the wires are installed in the correct place. Make sure the wire are tight on the new switch. Install the new switch, put the two mounting screws in, reinstall the back, put...
Read more
More
$87.60
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74007806
Fix burners that won't light with this cooktop igniter switch wire assembly. Restores reliable spark ignition when switches fail. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Igniter worked on all burners at once when any knob was turned on except one John B. • Southlake , TX • March 11, 2019
The one knob that did not make the igniters fire could be lighted by turning it on and along with any other knob. So the "igniter switch" for one burner did not work... intermittently. The hardest part of the repair was removing the Torx 15 head sheet metal screws from the "Burnr-Heads" (their name) which are under the smooth round caps. I broke the tips off two cheap Torx bits trying to loosen the ten screws. Note that some Torx 15 bits have a hollow center and are weaker. The ones with...
Read more
More
$102.35
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10085220
Washer won't start or shows electrical faults? A failed ground switch disrupts the safety circuit. This switch restores proper grounding for reliable operation.
Do-It-Yourself Stories from Customers like You
The code was f20 which means not enough water flow. Bruno R. • Franklin Square , NY • April 10, 2021
Watched YouTube and ordered parts then replaced the parts and walla !!!! All was good.
Read more
More
$21.34
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285511
Fix unresponsive or erratic cycle selection with this rotary encoder switch. Mounts behind the control knob to restore accurate cycle settings and indicators.
More
$91.23
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WR60X25785
This evaporator fan blade mounts on the fan motor and circulates cold air across the evaporator coils and throughout the compartments. Replacing a cracked, warped, or loose blade restores proper airflow and stable temperatures.
- Moves air across the evaporator to distribute cooled air evenly
- Helps maintain consistent refrigerator and freezer temperatures
- Common symptoms include weak or no airflow, warm spots, frost buildup on the evaporator cover, and rattling/scraping noises
- Replace if the blade is damaged or spins loosely on the motor shaft
What's included: 1 evaporator fan blade Install notes:
- Disconnect power before servicing
- Remove shelves/bins and the rear evaporator cover to access the fan
- Note blade orientation and seating depth; pull the old blade straight off the motor shaft
- Press the new blade on until fully seated; verify free spin and proper clearance before reassembly
Do-It-Yourself Stories from Customers like You
Evaporator fan blades broke. Michael G. • Eastborough , KS • January 09, 2021
Ordered a new fan.
Read more
More
$14.95
IN STOCK
Most orders arrive by Wednesday, November 25