We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Fix washer not filling, slow fill, or water leaks with this water inlet valve assembly. Moderate DIY repair, typically takes 30-60 minutes to install.
I replaced the water inlet valve assembly. We have relatively hard water and I assumed that over the years those inlet valves were clogged with calcium deposits which in turn led to the high pitched squealing as water was added to the machine. The hardest part of the entire job was releasing the top of the washer to disconnect the hoses from the valve assembly. Everything else was relatively easy. We simply followed the online video. My washer no longer screams and I'm thrilled! Your... Read more
Usually ships within 4 - 14 days
Fix slow filling, no-fill, or continuous filling issues by replacing a faulty water inlet valve. Straightforward 15-20 minute repair for most DIYers.
Replaced hot and cold intake valves. Read more
Fix a burner that won't light, leaks gas, or has a broken control stem. This gas valve regulates flow to one cooktop burner. Moderate DIY repair.
Shut off gas. Order part from your helpful (on Sunday afternoon) telephone person. Get part in two days. Replace part. Read more
Ice maker not filling or water won't shut off? The water inlet valve controls flow to your ice maker and dispenser. DIY-friendly repair in 30-45 minutes.
Fixed the problem, it is now making ice. Read more
Converting your portable dishwasher to built-in? This conversion kit includes all mounting hardware and adapters needed for permanent installation.
New seals come with this valve.
Opened the washer (details later) and noted the controls and water path. Ordered dispenser bottom and cover and dispenser valve assembly and rubber washers. When the parts arrived I removed the top portion of the detergent dispenser assembly; removed the door and 2 screws from opposite door wall; snap open the front cover and lifted it off; removed 1 metal screw each from the bottom front corners of the top cover; lifted the top cover and used a piece of wood to hold it up; pull... Read more
Note: Due to design change, new part may look different but is still a functional replacement.
I replaced the water inlet valve. Apparently, the hard water in my house slowly deposits crud around the valves such at over time, the valve seals quit forming a tight seal when closing. This allows water to slowly leak through, even with the machine off. I removed the top of the washer, disconnected hoses and wires and replaced the valve in fairly short order. This fixed the problem. Read more
Dishwasher not draining or draining slowly? A worn valve flapper in the dual-pump assembly disrupts water flow. This repair restores proper drainage.
Removed dishwasher from it niche, examined the bottom, and found out what parts I needed. Went on line, found Appliance Parts Pro, looked at their video, saw that I could do it, and ordered the parts. When the parts arrived, removed old parts, and inserted new ones. It took longer to remove the dishwasher from it's niche, than to replace the parts. Read more
Fix dishwasher not draining or OE error codes with a new check valve. Prevents backflow and keeps water moving properly. Easy 30-minute DIY repair.
I watched a suggested video about my model and was able to easily take apart the filter unit and access the drainage area. I found a worn out "Float" Valve. In the process of replacing the float valve I went ahead and replaced a gasket and the Valve, Check. Repairs went great. Parts were a perfect fit. This is the second time I used AplliancePartsPros. Read more
Burner won't light or flame height won't adjust? This top burner valve controls gas flow to restore reliable ignition and precise flame control.
This is a gas safety valve designed for dual oven configurations in gas ranges. It controls the flow of gas to the oven burners and shuts off the gas supply if the flame goes out, preventing dangerous gas leaks. Replace this valve if your oven fails to heat, heats inconsistently, or if you smell gas when the oven is turned off.
Found the problem through troubleshooting. Looked up the part on appliance parts pro. It was at my doorstep in 2 days. Replaced old gas safety valve. Oven works great again. Read more
Fix a washer that leaks, overfills, or won't fill properly with a new triple water inlet valve. DIYers report 10-15 minute installations.
Watched your repair video and replaced valve in 15 minutes. Read more
Fix gas smell or burner ignition issues with this range top burner valve. Common repair for leaking gas odor when range is off. Moderate difficulty.
I replaced the Igniter switch, two control valves and one holder/orifice (because I couldn't get the screws out and decided to just replace it rather than re-tape it and get new screws). The one thing I forgot was I have propane and the orifice was for natural gas. Fortunately, I was able to swap out the orifice from the old holder. Read more
Washer won't fill or fills slowly? This water inlet valve controls water flow into your combo unit. Fixes slow fills, no water, and leak issues.
This drain valve controls the flow of water out of the appliance to remove standing water and prevent overflow. Replacing a faulty valve restores normal draining and helps stop pooling or persistent drain error symptoms. What it does:
Replaced the drain valve. duh. here's the kicker...original problem was circulation pump was broken. Paid $350 to have it "professionally" fixed, and when we turned it on, it wouldn't run, so "professional tech" said "it must be the control panel". So I say maybe, send him away, checked the indicator panel and sure enuf, drain valve light. So I ordered it here, replaced the valve, and it ran really funky with weird noises, Then water starts leaking under dw. So I figured I did something... Read more
The Impeller Jug is an OEM part for Bosch dishwashers. Located inside the wash chamber, the impeller jug is responsible for evenly distributing water throughout the dish rack during the wash cycle. It features strategically placed holes and channels that work with the spray arms to direct water flow and ensure all dishes receive thorough coverage.
Symptoms of a bad impeller jug include:
Causes of failure can be mineral or scale buildup inhibiting water flow, cracked or damaged casing allowing leaks, or worn impeller fins no longer efficiently dispersing water. Over time, hard water deposits and normal use can degrade performance.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
1) Cleaned all sprayer arms. Many of the outlet holes were clogged with small debris (mostly small bits of food and a Jolly Rancher candy wrapper). 2) Removed circulation pump to clean impeller assembly. It was really clogged with stuff (more candy wrapper, shards of glass, a small metal screw). Luckily impeller fins were intact. 3) Re-assembled. Watch for some sharp edges when re-connecting sump well. 4) Performed three or so test wash cycles pulled out from under counter to make sure I had... Read more