Dent Remote Filter Parts

Traps food particles and debris during wash cycles to prevent recirculation and ensure clean dishes. Replace if clogged, damaged, or causing odors.

The mullion rail is the vertical divider strip that separates the fresh food and freezer compartments in side-by-side refrigerators, often housing the water and ice dispenser controls. This part needs replacement if you notice cracks in the plastic, damaged dispenser components, or poor sealing between compartments that affects temperature control.

Color: Grey

The Flapper Door with Mullion Heater is an OEM part for Whirlpool refrigerators. This part helps seal the gap between the refrigerator and freezer doors, preventing warm air from entering and cold air from escaping.  

Causes of a bad flapper door with mullion heater can include wear and tear over time, electrical issues affecting the heater, physical damage from repeated opening and closing of the doors, or warping due to temperature fluctuations.

Symptoms of a bad flapper door with mullion heater include:

• Condensation or frost buildup around the door seal
• Increased energy consumption due to temperature inefficiency
• The refrigerator door not closing properly
• Visible damage or wear to the flapper door or heater

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replaces broken or loose French door flipper assembly on refrigerators. Installs at top of left door to ensure proper closure and seal between doors.

Vertical divider rail between refrigerator doors. Replace if cracked, broken, or not sealing properly. Installs with one screw. Easy DIY replacement.

Replace your air conditioner filter to maintain clean air circulation and efficient cooling. Change when dirty or damaged. Confirm fit with your model number.

Grease filter for range hoods and over-the-range microwaves. Dimensions: 9-7/8" x 11-11/16" x 3/8" (9.875 x 11.6875 x 0.375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.

This refrigerator door flipper mullion is the folding center rail that bridges the gap between the doors. It helps complete the door seal and reduces condensation along the center for better temperature retention.

• Bridges the gap between doors to complete the center seal and improve efficiency
• Folds out of the way when a door opens; flips into place as the doors close
• Helps limit moisture/sweating at the middle of the refrigerator
• Replaces a cracked, loose, or broken mullion that causes air leaks, doors popping open, or poor sealing

• Disconnect power before servicing; remove door bins for access
• Remove mounting screws; lift off the assembly and disconnect the harness if equipped
• Transfer any end caps/brackets; ensure spring orientation and proper wire routing during reassembly
• After installation, verify smooth flipping action and a continuous gasket seal down the center

Traps lint, coins, and debris to protect your washer's drain pump. Replace if clogged, leaking, or threads are damaged. Confirm fit with your model number.

Restore a tight, even seal between your refrigerator's doors. This vertical mullion assembly flips into place to cover the center gap, helping maintain proper temperatures and reduce condensation.

• Bridges the gap between doors to create a continuous sealing surface
• Helps keep cold air in and warm air out for consistent cooling
• Aids proper door alignment and smooth closing
• Common symptoms of a failed mullion: broken or wobbly flipper, doors not closing fully or popping open, moisture/icing at the center, warming in the fresh food section

• Disconnect power before servicing and open the doors
• With the door open, release the retaining screws or tabs and lift the old mullion off the upper and lower pivots
• Position the new assembly on the pivots, secure it, and verify the flipper moves freely and seals evenly against the opposite door
• Restore power and recheck door operation and gasket contact along the full height

Carbon filter for range hoods and over-the-range microwaves. Dimensions: 6-3/16" x 8-11/16" x 1/4" (6.1875 x 8.6875 x 0.25). Rectangle shape. Removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.

Grease filter for range hoods and over-the-range microwaves. Dimensions: 8-3/4" x 10-1/2" x 3/32" (8.75 x 10.5 x 0.09375). Basket shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.

Removes cooking odors in recirculating range hoods. Replace when odor absorption weakens or airflow decreases. Confirm your hood recirculates air indoors.

The Freezer door assembly is essential for maintaining the efficiency of your bottom-mount refrigerator. This genuine OEM part ensures a snug and reliable seal, preventing cold air from escaping and keeping your freezer at the optimal temperature. By effectively insulating the door, it helps reduce energy consumption, which can lead to lower utility bills and a more eco-friendly household. The durable design of the seal assembly withstands daily use, ensuring long-lasting performance and protecting your food from freezer burn. Compatible with a variety of Samsung bottom-mount refrigerator models, this door seal assembly is straightforward to install, allowing you to restore your applianceGÇÖs functionality with ease. Whether replacing a cracked, worn, or damaged seal, the Refrigerator Freezer Door Seal Assembly provides a dependable solution to keep your refrigerator running smoothly and your items fresh.

Includes door assembly and internal latch parts.

Grease filter for range hoods and over-the-range microwaves. Dimensions: 11-1/4" x 11-11/16" x 11/32" (11.25 x 11.6875 x 0.34375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.

Screens food particles and debris from entering wash and drain pumps. Replace when clogged or damaged to maintain water circulation and pump efficiency.