Power Strike Small Engine Start Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293830
If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.
Do-It-Yourself Stories from Customers like You
Burner control bad, could not tell if it was on the number Chalmer M. • Tipp City , OH • January 21, 2022
Remove front panel and replaced. Received parts fast.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3391902
Dryer won't start or keeps running with door open? A faulty door switch prevents proper start/stop control. Easy DIY fix in under 30 minutes restores safety.
Do-It-Yourself Stories from Customers like You
Stacked washer/dryer dryer light stayed on when door closed and dryer would not turn on. 25 years old Neal Jay M. • Portland , OR • June 12, 2019
Order part and removed 3 hex head screws at top front edge of dryer and slightly lifted up on control panel to lift off pane. It has hangers that support panel while servicing. Remove 2 screws at inside top edge of dryer opening (where lever of switch protrudes) disconnect 3 wire clips at old switch and restore wire clips at new switch and place switch into position and restore 2 screws to secure switch body.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10149355
Fix burners stuck on high or not regulating temperature with this range infinite switch. Controls heating element power for precise cooking control.
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006900
Pedestal drawer won't stay closed? This door strike engages the latch to keep the drawer securely shut. Simple DIY fix takes about 15 minutes to install.
Do-It-Yourself Stories from Customers like You
The electrolux pedestal drawer would not latch and stay closed. Paul N. • Dover , MA • December 08, 2017
Went on line to Appliance Parts Pros Brought up the parts diagram located the new latch and prong for the drawer.
My new parts arrived in 2 days installed the parts put the drawer assembly back together closed the drawer all all is fine.
I have another pedestal drawer under the washer all the same age so I ordered a spare fully knowing I will need it sooner or later.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X10141
Fix a washer that won't agitate or spin with this lid switch. This safety part detects if the lid is closed. Easy DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
Washing machine would agitate but not spin Kevin T. • Overland Park , KS • January 27, 2020
Replaced lid switch and capacitor
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC97-07510B
Dryer won't start or door won't stay closed? A faulty door catch prevents the door switch from engaging. DIY-friendly fix with video guide.
Do-It-Yourself Stories from Customers like You
I accidentally stepped on the door of my Samsung dryer. The door is intact but brackets bent. Margaret C. • Tampa , FL • June 07, 2018
I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR09X10106
Refrigerator won't cool or compressor clicking? The overload and start relay protects and starts your compressor. DIY fix in 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Overload was smoking Ken P. • Kent , OH • December 13, 2018
Replaced overload, and capacitor
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304532796
Fix a dishwasher that won't start or run because the door won't latch. This strike receiver allows the latch to engage and signal a closed door.
Do-It-Yourself Stories from Customers like You
Dishwasher wouldn’t turn on. Door won’t latch no lights on control panel. Nikki B. • White Cloud , MI • July 20, 2019
I have a Kenmore dishwasher and this is the second time doing this repair. The dishwasher door wouldn’t click in place when closed and the lights on the control panel wouldn’t turn on. My kids like to push on the handle to get onto the counter causing the latch assembly piece to break after awhile. It’s a simple fix with the hardest part being getting the front panel lined back up to put back on. I ended up not needing the strike piece but got it just in case it had been bent.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X25194
Dryer not heating or overheating? This thermostat regulates temperature during the drying cycle. Common DIY repair that restores proper heat control.
Do-It-Yourself Stories from Customers like You
Not getting very hot Gore, R. • Silsbee , TX • November 07, 2025
Did it myself.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316580614
This assembly includes the spark ignition switches and wiring harness that control the igniter circuits on a gas range or cooktop. The switches detect burner position and signal the igniters to spark when a burner knob is turned. Replace this assembly if burners fail to ignite, click continuously without lighting, or if the spark module does not activate consistently.
Do-It-Yourself Stories from Customers like You
The back left burner didn't light and didn't click when turned the knob Oceanna C. • Watsonville , CA • April 07, 2016
My husband and myself didn't agree on which part was the exact problem. He felt it was the valve. I felt it was the ignitor/ orifice. And we both agreed the Harness-Ignitor needed to be replaced. So we ordered all 3, and I'm not sure if in fact all three were needed or not, but now with those parts replaced, the range is working like brand new!! Thanks to all the videos and diagrams on the website we were able to fix it ourselves easily. And the price was cheaper then other websites, also it...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853313
Genuine Whirlpool OEM moisture sensor bar for electric and gas dryers. Works with a second sensor strip to detect humity/moisture as clothes tumble past. The control board reads the signal to determine remaining moisture and ends the cycle automatically at the target dryness level — preventing over-drying and reducing energy use.
Common Failures
- Cycle ends too soon — clothes still damp
- Dryer won't shut off — runs continuously
- Error codes F:22 or F:26
- Inconsistent results — unpredictable dryness
- Bent, cracked, or detached bar
- Corrosion from dryer sheet chemicals
Do-It-Yourself Stories from Customers like You
The dryer sensor failure. Jim W. • Yukon , OK • January 08, 2024
Purchased a new sensor from AppliancePartsPros.com. Installed new part - Problem fixed.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572767
Dryer won't heat? A failed thermal limiter opens the heating circuit when temperatures exceed safe limits. Simple DIY fix restores heat in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Dryer no heat Everett E. • Portage , MI • November 01, 2015
The thermal cutoff went bad because of lint being trapped in dryer vent and blocked air-flow from dryer. Removed accumilation of lint and installed new thermal -cutoff and thermostat and dryer now works great.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10330137
The Push Button Switch is an OEM part for Whirlpool washing machines. This part activates various functions and cycles on the control panel of the washer. The switch is designed to ensure responsive and reliable operation when selecting wash settings.
Causes of a bad push button switch can include wear and tear from frequent use, exposure to moisture, or physical damage from impacts.
Symptoms of a bad push button switch include:
- Unresponsive buttons on the control panel
- Inability to start or change wash cycles
- Intermittent operation of washer functions
- Error codes related to control panel issues
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer was humming when pushing start button Chris K. • N. Wildwood , NJ • May 28, 2017
Removed front of dryer panel, removed top, and removed drum. Replaced motor and wheel, because the old wheel was rusted on the motor shaft, and could not be removed, so I had to break it off. Replaced motor, and reassembled. Everything works now. I also replace the switch-Pb, because the start button was getting stuck.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: A00055408
Fixes dishwasher leaking, error code i20, or pump that won't stop running. Monitors water pressure to control wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Leaking dishwasher. Richard W. • Louisville , KY • April 20, 2020
Replace the pressure switch.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11240283
Dryer door won't stay closed? This door catch secures the door during operation. Simple DIY repair with basic tools. Installation video available.
Do-It-Yourself Stories from Customers like You
Dryer door would not stay closed. John M. • Havertown , PA • September 20, 2020
New door catch.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24X10204
This microswitch senses the microwave door position and controls the safety interlock circuits. Replacing a worn switch restores proper start/stop behavior so the oven only runs when the door is fully closed.
- Detects door open/closed status to enable or disable cooking
- Part of the safety interlock system that stops operation if the door opens mid-cycle
- Replace if the switch fails a continuity check or shows heat or terminal damage
What's included: 1 microswitch
- Disconnect power before service; microwave capacitors can retain a dangerous charge
- Note wire positions and move them to the same terminals on the new switch
- Ensure the door latch cleanly actuates the switch; test operation before reassembly
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More