Run Vent Push Button Switch Parts
Genuine Ge part
By: Ge
Part Number: WE04X21014
Replace your dryer's control knob to restore cycle selection. Mounts on the console control shaft. Order a new knob if yours is cracked, stripped, or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10330137
The Push Button Switch is an OEM part for Whirlpool washing machines. This part activates various functions and cycles on the control panel of the washer. The switch is designed to ensure responsive and reliable operation when selecting wash settings.
Causes of a bad push button switch can include wear and tear from frequent use, exposure to moisture, or physical damage from impacts.
Symptoms of a bad push button switch include:
- Unresponsive buttons on the control panel
- Inability to start or change wash cycles
- Intermittent operation of washer functions
- Error codes related to control panel issues
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer was humming when pushing start button Chris K. • N. Wildwood , NJ • May 28, 2017
Removed front of dryer panel, removed top, and removed drum. Replaced motor and wheel, because the old wheel was rusted on the motor shaft, and could not be removed, so I had to break it off. Replaced motor, and reassembled. Everything works now. I also replace the switch-Pb, because the start button was getting stuck.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: A00055408
Fixes dishwasher leaking, error code i20, or pump that won't stop running. Monitors water pressure to control wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Leaking dishwasher. Richard W. • Louisville , KY • April 20, 2020
Replace the pressure switch.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24X10204
This microswitch senses the microwave door position and controls the safety interlock circuits. Replacing a worn switch restores proper start/stop behavior so the oven only runs when the door is fully closed.
- Detects door open/closed status to enable or disable cooking
- Part of the safety interlock system that stops operation if the door opens mid-cycle
- Replace if the switch fails a continuity check or shows heat or terminal damage
What's included: 1 microswitch
- Disconnect power before service; microwave capacitors can retain a dangerous charge
- Note wire positions and move them to the same terminals on the new switch
- Ensure the door latch cleanly actuates the switch; test operation before reassembly
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8273106
Replacement control knob for range burner or oven temperature. Installs on control panel. Replace when cracked, broken, or missing. Easy snap-on installation.
Do-It-Yourself Stories from Customers like You
The control knob for one of my burners broke right in the middle of fall canning season Jeanene M. • Seibert , CO • October 04, 2014
I ordered the knob and had it back and on my range before my pickles were ready to can. Loved the fantastic response time.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8203534
Fix a burner stuck on high or that won't heat properly with this cooktop infinite switch. Restores accurate temperature control. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Failed dual element switch on whirlpool ceramic cooktop model #gjc3034gb0 Rodney S. • Kuttawa , KY • August 17, 2014
This cooktop has a dual element with an inner burner surrounded by an outer burner. The switch controls either the inner burner alone or both. The switch failed in that it would not operate the inner burner by itself, both burners would come on and only on high. On 8/14/2014 I replaced the failed dual element switch as follows:
• Turned power off to cooktop.
• Removed unit from cabinet.
• Removed metal edging and glass top.
• Removed screws holding switch panel access underside.
• Removed old...
Read more
More
Genuine Lg part
By: Lg
Part Number: AEZ74073405
Control knob for range. Installs on control panel to adjust temperature and cooking settings. Replace if worn, cracked, broken, or graphics are faded.
Do-It-Yourself Stories from Customers like You
No graphics on knobs. Erica V. • Brown Deer , WI • January 07, 2024
We just bought a home and the LG stove top was in pretty good condition besides not having any writing on the knobs. This made it difficult to know the proper settings when cooking food. So after one week of fooling with it, I looked up the parts and fortunately, AppliancePartsPros.com had the knobs in stock.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10875909
This is a chrome-finished timer knob that attaches to the timer shaft on the dryer's control panel, allowing you to select and start drying cycles. It is made of plastic with a metallic chrome appearance. Replace this knob if it is cracked, broken, or no longer grips the timer shaft properly, making it difficult to turn or set the dryer cycle.
Do-It-Yourself Stories from Customers like You
Whirlpool washing machine with broken door hinge. Adrian H. • Longmont , CO • February 26, 2024
I ordered the door hinge and bushing. I watched the online video showing the replacement procedure. The parts were correct. It was easy to replace. The door works great now. Very pleased with the process and results.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11569415
This is a slide switch that controls the light or fan functions on a range hood. It mounts on the front control panel and slides to select different speed or on/off settings. Replace this part if the switch is broken, stuck, or no longer properly activates the hood's light or fan.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10175692
This stainless steel control knob fits on the front panel of the range and is used to adjust the flame on a surface burner. It slides onto the gas valve stem and includes printed markings indicating flame settings. Replace this knob if it is broken, discolored, or no longer turns the valve stem smoothly to control the burner.
Do-It-Yourself Stories from Customers like You
Broken knob Scott A. • Spring , TX • August 05, 2016
Pulled the old knob off, pushed the new knob on.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00425565
Replace your dishwasher's on/off button when cracked, broken, or stuck. Mounts to the control panel fascia for starting and stopping wash cycles.
Do-It-Yourself Stories from Customers like You
Broken fascia on Bosch dishwasher. Jerry's W. • Washougal , WA • November 19, 2017
The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons.
I pulled the stainless panel off the front, then...
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: 202937
If your washer overfills, underfills, or won't advance cycles, the water level pressure switch may have failed. Takes about 10-15 minutes to replace.
Do-It-Yourself Stories from Customers like You
Broken pressure switch Carole Y. • Yakima , WA • November 06, 2019
Bought part from you and got a repairman to put it in. Darlene of your staff found part I needed. Nice lady! Repairman charged $82 to do a 10 minute job. Not your fault!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316219004
Fix burners that won't spark or click constantly. This igniter switch wiring harness restores reliable lighting on gas ranges. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
One of my stove burners would not spark. Mike M. • Bound Brook , NJ • October 26, 2023
I replaced the switch/wire harness that connects to the gas valves.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11512417
Directs defrost water from the evaporator to the drain pan. Replaces cracked, broken, or deformed drain tubes causing leaks or ice buildup issues.
Do-It-Yourself Stories from Customers like You
The problem was ice buildup on the floor of the freezer William B. • Pahoa , HI • January 15, 2016
A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction....
Read more
More
Genuine Ge part
By: Ge
Part Number: WB03K10216
Replacement control knob for gas range valve stem. Installs on burner or oven controls. Needed when original knob is broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Broken knob on burner Roger H. • Germantown , WI • December 26, 2015
Pushed it on
Read more
More
Genuine Ge part
By: Ge
Part Number: WB03K10267
Replaces a cracked, broken, or missing range control knob. Restores smooth operation and proper fit on the control shaft for reliable temperature selection.
Do-It-Yourself Stories from Customers like You
The knobs that came with my ge cafe series stove were plastic and were complete crap! 5 out of 6 of them had split and were not turning the metal pegs inside properly David W. • San Ramon , CA • April 02, 2015
I bought the replacement knobs from Appliance Parts Pros.com and they were much better knobs that what originally came with the unit. They are actually metal and the plastic posts that connect with the range are a much higher grade plastic. To be honest I think the stove works better than it did when it was new. Some of the original knobs may have been broken when we purchased the unit. Replacement took under 5 minutes for all of the knob. Oh....and by the way....they appear to be the same...
Read more
More