Line Hook Line Mover Regular Spring Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540221
Door won't latch or stay closed during wash? The door strike may be broken. Easy 5-minute DIY fix with just a screwdriver. Includes installation video.
This part fixes the following symptoms
-
Lid or door won't close
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Door latch broke while closing door Julie L. • Modesto , CA • March 13, 2016
I removed the two screws and all the pieces that were broken. Went online to Appliance parts.com, searched for the part using the model number from the machine and ordered the part . part arrived in 2 days and with a Phillips screwdriver was installed in less than 5 minutes.
Read more
More
$10.71
- Compare At:
-
$12.74
- You Save:
-
$2.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 154579101
Replaces broken or stretched dishwasher door springs. Restores proper tension so door opens and closes smoothly without dropping or loud noise.
Do-It-Yourself Stories from Customers like You
Frigidaire Gallery dishwasher door dropped to floor. Mark K. • Aurora , OH • December 23, 2021
Found the end of the right-side Door Spring that connects to the Door Cable broke off and the plastic end of the Door Cable that connects to the Door Spring was also broken off.
Ordered a replacement Door Spring 154579101 and Door Cable 154578801 from AppliancePartsPros.com When the parts arrived a few days later, I watched the video on the AppliancePartsPros.
Following the instructions on the video, it took about 15 minutes to replace the Door Spring and Door Cable. Note: I did not have...
Read more
More
$52.65
- Compare At:
-
$62.65
- You Save:
-
$10.00
Genuine Ge part
By: Ge
Part Number: WE1M1011
The Door Latch is an OEM part for GE dryers. This part ensures the dryer door stays securely closed during operation, activating the safety switch to allow the dryer to operate. The latch mechanism engages with the door strike to lock the door, preventing it from opening while the dryer is running, which is essential for both safety and proper functioning of the appliance.
Causes for replacement can include normal wear and tear, accidental damage, or a misalignment that prevents the door from securely latching.
Symptoms of a bad Door Latch include:
- The dryer door doesn't stay closed during cycles.
- Difficulty in starting the dryer due to the door not activating the safety switch.
- Visible wear or damage to the latch mechanism.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016
My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ...
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10482836
Fix a washer that won't start or door that won't stay locked with a new door latch. Common when the lid unlocks during cycles or clicks but opens easily.
Do-It-Yourself Stories from Customers like You
Latch lid switch strike & possible main board. Paul Q. • Bacliff , TX • January 18, 2021
OK this is one of those stories that can't help but encourage those of us who have absolutely no idea how appliances work and yet by simply refusing to pay such ridiculous repair prices can honestly get it done with a "FRACTION" of the cost.
So here is my story & the scary unknown(s) BUT the incredible help offered to me to successfully win the ( I won't allow you to take advantage of me ) anymore conclusion.
I had a 2 1/2-year-old Maytag coin wash machine that just quit working; after...
Read more
More
$79.95
- Compare At:
-
$95.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11565030
The Latch is an OEM replacement part for Whirlpool washing machines. This component ensures the washer's door or lid is securely closed during operation, preventing water spillage and ensuring the safety of the user by halting operation when opened.
Causes for a malfunctioning Latch can include mechanical wear from frequent use, damage from forceful closing or opening, or electrical issues affecting its signaling capability to the washer's control system.
Symptoms of a bad Latch include:
- The washing machine's door or lid not closing securely
- The appliance not starting or pausing mid-cycle due to latch issues
- Error codes or indicators signaling latch or door problems
- The need for excessive force to open or close the door or lid
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken door latch on front load washer Joshua T. • Rockdale , TX • November 09, 2019
Watched a quick YouTube video.
Read more
More
$45.30
- Compare At:
-
$54.36
- You Save:
-
$9.06
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780051
Suspension rod kit connects the outer tub to the washer base for support and stability. Replace when rods are worn, broken, or causing excessive movement.
Do-It-Yourself Stories from Customers like You
Tub was banging against the side of the washer Chris Z. • Lewisburg , TN • August 11, 2014
Rebalanced the load but noticed the drum was sitting lower and the springs were wore out and it went out of balance easy, so i got the suspension rod kit and installed it and it works much better. It took me 2 hours because i didnt have adequate room to move around. Hour job if you have room.
Read more
More
$107.38
- Compare At:
-
$127.78
- You Save:
-
$20.40
Genuine Lg part
By: Lg
Part Number: 4970FR2084Z
Suspension spring supports and stabilizes the washer tub during wash and spin cycles. Replace if broken, snapped, or stretched to restore proper operation.
Do-It-Yourself Stories from Customers like You
The drum on the spin cycle made very loud noises and it sounded like a broken suspension spring Tom Z. • Mahwah , NJ • July 23, 2015
I removed the top cover and found the left main suspension spring broken. Appliance Part Pros had the new springs (2 I replaced both) at my door in 26 hours. Excellent service from this company.
After disassembling the drum from the chassis of the machine, it was very easy to replace the springs.
i do wish however that I had purchased a higher quality machine. LG refused to do anything to help and the machine is only 3 years old and gets minimal use.
Hats off however to Appliance Parts Pros....
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8270020
Replacement door balance spring for dishwashers. Provides tension so the door opens smoothly and stays in position. Needed when spring is rusted, broken, or stretched causing door to slam open or fall without resistance.
Do-It-Yourself Stories from Customers like You
Door handle on 2002 model maytag dishwasher broken Thomas H. • Fort Worth , TX • October 17, 2014
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them.
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002773
Kit of six suspension springs that support and stabilize the washer tub. Replace when springs lose tension, causing tub to tilt or sag improperly.
Do-It-Yourself Stories from Customers like You
Out of balance on spin cycle Brian B. • Magnolia , TX • November 24, 2014
Replaced Snubber Ring installed spring kit. Watched installation video, found it very helpful to plan repair. The washer runs like new now.
Read more
More
$67.95
- Compare At:
-
$81.54
- You Save:
-
$13.59
Genuine Ge part
By: Ge
Part Number: WH08X37937
The Lid Lock Assembly is an OEM replacement part for GE washing machines. This assembly ensures the washer lid remains securely locked during operation, preventing accidental openings and ensuring safety during high-speed spin cycles. It also helps the machine operate only when the lid is properly closed.
Causes of a bad lid lock assembly can include wear from frequent use, electrical issues affecting the locking mechanism, or damage to the lock's housing or wiring. These issues can impair the washer's ability to lock and operate properly.
Symptoms of a bad lid lock assembly include:
- Washer not starting or stopping mid-cycle
- Error codes related to the lid lock mechanism
- Lid not locking or unlocking as expected
- Audible clicking without the lid securing
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Lg part
By: Lg
Part Number: 4970ED4004G
Hinge spring for dishwasher doors. Attaches to door hinge mechanism to provide proper tension for smooth opening and closing. Replace if worn, stretched, or broken causing door to slam or not stay open.
Do-It-Yourself Stories from Customers like You
LG dishwasher door crashing open (very heavy) Kristi B. • Oregon City , OR • December 05, 2020
We knew at least one door hinge cable assembly or hinge spring was broken (the door started falling down rapidly and became heavy to close) so we ordered two of each since we had read to go ahead and replace the damaged items on both sides. While we were waiting on the order, the other side must have broken-the door became incredibly heavy and instead of falling open, started crashing down unless it was carefully lowered. We feared it would fall on one of our animals and kill them. We did not...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: W11670519
Replacement lid lock for top-load washers. This 120V assembly secures the lid and reports its status to the control, restoring safe operation, proper spin speeds, and normal cycle progress when the original latch becomes intermittent or fails.
- Locks the lid during spin and agitation for user safety
- Detects lid position and sends closed/locked status to the control board
- Helps the washer reach and maintain proper spin speeds
- Common failure symptoms: lid won't lock/unlock; lid lock light flashing
- What's included: 1 lid lock assembly
Install notes:
- Disconnect power before servicing
- Access the lock at the top/front rim; remove fasteners and the connector, then swap the assembly
- Route wiring exactly as original and secure it to avoid pinching or chafing
- Verify lid strike alignment and run a short test cycle to confirm lock operation
Do-It-Yourself Stories from Customers like You
Maytag locking mechanism broke so machine would not function Sandra M P. • Rancho Palos Verdes , CA • August 16, 2026
We ordered a new locking mechanism, latch and cover, and followed the directions that we found on UTube.
Worked perfectly.
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Whirlpool part
By: Whirlpool
Part Number: 285901
The Counterbalance Spring Kit is an OEM part for Whirlpool washing machines. This kit includes springs that help balance and stabilize the washer drum during the spin cycle, preventing excessive movement and vibration. The counterbalance spring kit includes 3 counterbalance springs. The counterbalance spring kit includes 3 counterbalance springs.
Over time, counterbalance springs can wear out, lose tension, or become damaged due to repeated use and the strain of heavy loads. A faulty counterbalance spring can lead to instability and increased noise during operation, affecting the washer's performance.
Symptoms of a bad counterbalance spring kit include:
- Excessive shaking or vibrating during the spin cycle
- Loud banging or thumping noises
- The washing machine moving or "walking" during operation
- Unevenly distributed loads or off-balance errors
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My whirlpool washer was chasing me around the room it was so out of balance and shaking James S. • Oak Point , TX • March 21, 2016
My wife and I along with Mat on the video replaced the upper and lower friction pads, along with the balance springs. The machine runs smooth as it did new. Thank you everyone at Appliance Parts Pro and Mat. You are a great company. P.S. my wife and I should had made our own video for you since we are both in our 60s I bet it would have been funny Thanks Again. JIm & Debbie from Texas.
Read more
More
$48.46
- Compare At:
-
$58.15
- You Save:
-
$9.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135004
Suspension spring kit for front-load washers. Supports the tub assembly to maintain balance during cycles. Replace if springs are broken, stretched, or missing.
Do-It-Yourself Stories from Customers like You
Whirpool duet 10 years old drum would make a rocous during spin cycle Jose F. • Pflugerville , TX • December 06, 2014
Ordered the springs and shocks. Noticed that the washer had placement for 4 springs, but the factory only installs 2 (or they forgot to install the other two on my machine).
If you replace the springs, be sure to check for the spring bracket mount. You will also need those.
The washer is running fine. Next I'll work on the dryer.
Read more
More
$49.51
- Compare At:
-
$58.92
- You Save:
-
$9.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3389441
Dryer door won't stay closed or requires tape to shut? The door catch secures your dryer door during operation. Easy 5-30 minute DIY fix with video guide.
Do-It-Yourself Stories from Customers like You
Dryer door would not stay closed without being taped shut Marceen W. • La Canada , CA • June 10, 2016
I chatted with a rep on Appliance Parts Pros and found out which parts I needed for my model of dryer. Ordered the 2 clips that held the door closed. They arrived the next day!! My dryer was very different than the video but we were able to figure out which screws to remove. The old clips popped out and the new ones popped in. Took about 30 minutes because of there being a top and bottom clip to remove and replace and line up the door parts to screw the screws back in. It works great!! I...
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Lg part
By: Lg
Part Number: EBF61674802
Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.
This part fixes the following symptoms
-
Door latch failure
-
Won't start
-
Will not agitate
-
won't spin
See more...
Do-It-Yourself Stories from Customers like You
Lid lock stopped working Eugenio V. • Chicago , IL • February 26, 2016
Replaced it with the part I ordered from you guys. I had originally had LG come and check it out but they quoted me a price 250 plus tax. I said no way this little piece can cost 1/4 of the whole washing machine. So after finding your price, I you-tubed on how to replace it and I did in 20 min. Thanks youtube and thanks to you guys for such a great price on this switch assembly
Read more
More
$138.95
- Compare At:
-
$163.96
- You Save:
-
$25.01