Need Help?
Call
The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.
Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.
Symptoms of a bad Mounting Plate include:
Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.
Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.
Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes.
Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles.
Symptoms of a bad upper dishrack rail include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros! Read more
Secures the lower spray arm in place. Replace if tabs are broken, worn, or missing, causing the spray arm to detach or not lock down properly. Installs under filter.
Replace the sprayer in the middle of the dishwasher, the problem was the grommet on the back of it but it's not available individually. Read more
The Rear Door Support is an OEM replacement part for GE ranges. Located at the base of the range, this bracket provides weight-bearing support for the lower oven drawer. It facilitates smooth extension and retraction of the drawer. Causes of faulty support can include cracks or fractures developing over extended use, worn joints unable to sustain drawer weight, or misalignment from repeated opening/closing stress. Symptoms of a bad support include:
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!! Read more
The Shock Absorber Washer is an OEM replacement part specific to Whirlpool-brand washing machines. It is a hydraulic device that absorbs the vibrations of the outer washer tub. Note: This is only one shock absorber.
Symptoms of worn or cracked shock absorber washers include:
Causes involve many cycles of compression and release and solvents inside the washer degrading natural rubber. Deteriorated washers no longer absorb vibrations properly.
This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Replaced all 4 shocks. Read more
Suspension damper rod assembly for washers. Mounts between drum and frame to absorb vibration. Replace if worn, damaged, or causing excessive movement.
Samsung top load washer, about 3 years old started throwing a DC error code more and more often. Initially started with large loads. Wash would get to spin cycle, start wobbling all over the place, stop and refill then try again. Eventually it would stop and throw the DC code. As time went on, the size of the loads got smaller and smaller. Research here indicated that suspension rods probably need replacing. I bought 4 rods for replacement for about $90 in total inc. tax & shipping.... Read more
Suspension rod and spring assembly for top-load washers. Mounts between tub and cabinet to absorb vibration. Replace if cracked, broken, or corroded.
I replaced the suspension rods -- I am NOT particularly experienced with machines of any type, so it took me longer than it might have someone else, but once I figured out what I needed to do, everything went very smoothly. The washer spins like a dream now! Read more
The bearing mechanism located at the top of the dryer drum that supports the drum's rotation and reduces friction during operation. Replace when you hear grinding or squealing noises, the drum wobbles, or clothes don't tumble properly.
Initially I replaced the rear drum bearing assembly. I searched all over for a good how-to video and came across the Appliance Pros tutorial on YouTube. It was by far the easiest to understand with the added bonus that AP had the parts I needed. I had never done this before, but using the video as my guide I was able to replace the rear bearing assembly in about an hour and a half. It would've taken a little less time if I hadn't had to run to the hardware store for a T25 bit. I also could... Read more
Supports and secures the upper spray arm in your dishwasher. Replace if cracked, broken, or detached. Clips to the bottom of the upper rack.
Note: This manifold has two holes on the part that mounts to the back wall of the dishwasher. For one hole use WPW10571949.
I discovered that the manifold was not connecting with the water supply,so the dishes in the upper tray were not being washed. This was caused because the rear hanger on the manifold had broken and it did not lineup properly into the water supply connection in the back of the dishwasher. I removed the manifold and found that it had two part numbers stamped on it. I searched on both part numbers and received a hit on the second part number. The photo looked exactly like my manifold so I... Read more
Suspension damper assembly that mounts inside your washer to absorb vibrations during operation. Replace if cracked, broken, or worn to restore stability.
Stabilizes the drum and absorbs vibrations during wash cycles. Replace if cracked, worn, or causing excessive washer movement. Installs between tub and base.
Supports the washer tub and absorbs vibration during cycles. Replace if corroded, worn, or broken to prevent drum sagging and banging during operation.
I have a 14 year old GE washing machine that had been making a lot of noise while running but had eventually just stopped flat. The agitator and spin cycle would not run. I found this site and made excellent use of all the repair videos to study about my issue. I put in my machine model number and I Immediately was able to start honing in on what my problem could be from website advice about popular repair parts, stories others had shared about their similar machine issues and watching videos,... Read more
Suspension rod and spring assembly for washer drum stability. Replaces worn, broken, or weakened suspension components causing drum movement or sagging.
Replacement lower spray arm support bracket for dishwashers. Mounts underneath the wash arm enclosure to securely anchor the rotating spray arm. Needed when cracked or stripped.
We initially noticed the dishwasher running loud and failing to completely clean dishes. Research suggested issues like this were normally caused by either the main circulation motor or the drain motor. Over the next week the noise worsened, and it became obvious that the circulation motor had went (loud whirring noise whenever the spin cycle kicked in). I watched a couple youtube videos on the removal and dissassembly until I felt confident that my wife and I could handle the project. For the... Read more
Secures the cutlery basket to the lower rack of your dishwasher. Replace this clip if broken, cracked, or missing to keep the basket properly mounted.
Ordered parts Read more
Suspension rod and spring assembly supports the washer tub and reduces vibrations. Replace if cracked, worn, or broken to restore proper tub support.
I replaced all 4 suspension rods and springs and now it spins very smooth. They weren't broken, just badly worn. It gave new life to my 15 year old GE Profile washer. They are basically springs, so they wear after a while. It was well worth the hour I spent fixing it. You need a good long reach to get to the back 2 and you have to take off the dampening straps and the control panel so you can gain access. All in all, I'm happy with the repair, although I though that these parts are bit... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.