Power Nut Installation Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390291
Dryer won't heat or shuts off during cycle? High limit thermostat cuts power when overheating occurs. Quick 2-screw fix restores heating function.
Do-It-Yourself Stories from Customers like You
No heat in dryer J B. • Freeport , FL • September 19, 2014
Changed parts
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D515873
Dryer blowing cold air or not heating? This limit thermostat monitors drum temperature and controls the heating element. Common fix for temperature issues.
Do-It-Yourself Stories from Customers like You
Cracked heater element in speed queen dryer Wendell H. • Melbourne , FL • October 09, 2019
I found a few videos on YouTube about other dryers that gave me enough information to figure out my own. I was able to pull out the heater element and replace it with a new one that arrived the day after I purchased it. I also replaced the thermal fuse and thermostat.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X26138
The High Limit Thermostat is an OEM replacement part for GE electric dryers. Located internally near heating components, this safety device monitors drum temperatures to prevent excessive heat accumulation.
Causes of malfunction relate to water residues creating shorts, loose terminals detaching wiring due to vibrations, or a worn heat sensitive mechanism reacting slower over time.
Symptoms involve:
- Repeated thermal cut-off trips mid-cycle
- Inability to select heat settings without errors shown
- Bleach or smoke smells indicating unregulated temperatures
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
High temp sensor blew out drier would not light. Gary H. • Boonville , NY • May 16, 2020
Did continuity tests on the sensors, till I figured out what one was bad.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135
Dryer not heating or flame goes out after igniting? This flame sensor monitors burner temperature to regulate gas flow. Easy 15-minute DIY repair.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10900067
Dryer won't heat or shuts off during cycle? The thermal cut-off terminal prevents overheating by cutting power. DIY fix in 15-20 minutes with a multimeter.
Do-It-Yourself Stories from Customers like You
No heat Mitchell D. • Gray , LA • October 10, 2024
Tested upper thermostat for continuity and had none. Cleaned exhaust of excess lent. Changed cycling thermostat and cutoff terminal. And now she works great.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP303395
Dryer won't heat or overheats? High limit thermostat prevents overheating by shutting off heat at high temps. Easy DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Would run fine but would not dry clothes something would not allow the dryer to heat Todd K. • Burr Oak , MI • March 10, 2017
For several months we could smell a slight odor of propane in the laundry room and wondered why, just didn't seem like it was enough to be overly concerned, but thought something must be wrong with the dryer, but it was still working. We just didn't know how inefficiently. Then the extra time it took to dry a load of clothes progressively seemed to get longer, but things still seemed to work fine and the clothes got dried, given enough time. Then approximately 3 weeks ago we noticed the dryer...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 240311303
Protective washer that sits between the door hinge and frame. Replaces worn or missing washers that cause door sagging, dragging, or poor seal contact.
Do-It-Yourself Stories from Customers like You
Frig door hinge worn letting door drag on bottom Jerry P. • Shawnee , KS • January 21, 2017
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X500D
These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.
This part fixes the following symptoms:
- Loose or wobbly parts or panels within the appliance's interior or exterior
- Panels or components falling out of place, creating gaps or exposing internal parts
- Unusual noises or rattling sounds during the appliance's operation
The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle.
https://www.youtube.com/watch?v=cQwLtRcHx9k
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00151703
Six-screw kit for securing the inner door assembly in your dishwasher. Replace missing, stripped, or lost screws to properly fasten door panels.
Do-It-Yourself Stories from Customers like You
Bosch dishwasher would not move any water Steven J. • Los Gatos , CA • October 08, 2017
Repair estimate was $250 parts, $250 labor to change out the circulating pump. I decided to do it myself. Pump was $166 from AppliancePartsPros. It arrived in 4 days. I looked at the video on their website, followed the instructions step by step and did it myself. They estimated 45 minutes. It took 2 hours.There are always minor differences so always take photos of yours. Suggest that you bag up all screws and pieces from each part as you take them off and label the bag. I had 12 bags with 2 to...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 218755504
Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.
Do-It-Yourself Stories from Customers like You
Broken handle on refrigerator door Margaret J. • North Olmsted , OH • January 29, 2016
I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
Mounting screw for refrigerator ice maker assembly. Secures components to maintain structural integrity. Replace if lost, stripped, or corroded.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M448
Dryer shuts off mid-cycle or overheats? The outlet control thermistor monitors exhaust temperature. Moderately difficult repair requires drum removal.
Do-It-Yourself Stories from Customers like You
GE profile dryer shut off mid cycle Mark A. • Boynton Beach , FL • February 01, 2021
My first attempt was to replace the main board and then the thermistor, should have done this the other way around, turned out it was the thermistor, a pretty cheap part, dryer works great now. Repair requires removing the drum but overall not too difficult or time consuming.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00188670
The 4 x 16 Screw is an OEM component for Bosch dishwashers.
Common causes of faulty screws include standard wear from years of housing vibrations during wash cycles. Mineral deposits lingering around screw heads also risk eventual corrosion and seizing issues.
Symptoms of potentially loose or damaged screws comprise:
- Odd knocking or buzzing noises from inside cabinets
- Detached or misaligned door panels
- Water leaks developing between internal seams
- Components unable to be fully secured down during repairs
This screw type is additionally suited for Thermador, Gaggenau as well as some premium Kenmore dishwashers.
Do-It-Yourself Stories from Customers like You
Purchased open box dishwasher buy at best buy was missing door plate brackets John C. • Thornton , CO • February 10, 2019
Ordered replacement parts from AP diagram
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573713
Dryer won't heat? A failed thermal cut-off fuse cuts power when temps spike. DIYers replace this safety part in 20-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
My maytag gas dryer would start and the the tumbler rotate but the igniter would not glow and flame not start .gil P. • Enumclaw , WA • March 29, 2015
The 2 sensors that sit on top of the flame tube work together. The Thrmst F should check closed, as should the Cutoff-TML, in order for power to flow to the ignitor. If the Cutoff is open, it is usually because the Thrmst-F did not open soon enough. The Thermst-F will cycle, closed to open, and repeat, however the Cutoff-HTML is a one time switch. If it opens it will not return to closed, and subsequently the ignitor will not glow.
Some professionals say that if one of these sensors fail, both...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 154106202
Brass nut that secures the heating element to the dishwasher tub. Replace if cracked, split, or causing leaks around the element mounting area.
Do-It-Yourself Stories from Customers like You
Dishwasher was leaking James E. • Marble , NC • March 12, 2014
Heating element nut had cracked causing a leak. Rather than run right out and buy a new one, I found the cracked nut and replaced it for about 11.00. Thank you Appliance pros. Quick shipping.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD18X10010
Dishwasher leaking from underneath? A cracked pump connector causes water pooling. Requires dishwasher removal; typically 1-hour repair once accessed.
Do-It-Yourself Stories from Customers like You
Leaking water onto the floor John G. • Canmer , KY • May 28, 2015
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you.
Read more
More