Need Help?
Call
This is a complete plug-in cooking module for compatible Jenn-Air/Whirlpool modular cooktops. It drops into the cooktop bay and provides a pair of electric coil burners so you can swap configurations as needed.
My new cooktop cartridge for my Jen-Air cook range works great. The range is probably around 40 years old. The old two-burner cartridge just plain wore out! Both burners cook evenly on all heat selections. Price of less than $200.00 was very reasonable. Thanks again for your help! Very easily plugs in to the range. Read more
Dishwasher won't start or turn on? This control board manages all wash cycles and settings. Located in the door for accessible replacement.
Dishwasher not completing cycles, won't turn on, or not draining? The control board manages all dishwasher functions and often causes these issues.
Ordered the controller and installed it. Now it works like a charm. Read more
Touch pad overlay for electric and gas ranges. Covers the control panel with clear markings for settings. Replace if cracked, warped, peeling, or worn.
I installed a new clock timer and overlay the job took only a few minutes and a very easy repair. Useful hint take a picture of your clock timer before you start to make sure all your wires are put back in the right order . Charles B Lafayette Tn Read more
Fixes dishwasher that won't start wash cycle, fills but won't run, or has unresponsive controls. Regulates cycles, timing, and water valve operation.
Protective overlay cover for range control panel. Replace if cracked, scratched, worn, or labels are fading. Installs over the control board buttons.
I replaced the control board. Repair company wanted $395.00. I ordered the board for 140ish, 5 days later, 9 screws, 6 moduler plugs....working oven. The hardest part was pulling out the stove. Read more
Fix a dishwasher that stops mid-cycle, won't start, or has unresponsive buttons with this electronic control board. Manages wash cycles and temperatures.
White faceplate graphics overlay that covers and protects your range control panel. Replacement needed when scratched, cracked, discolored, or peeling from heat.
Ordered a new Faceplate Graphics, removed old faceplate and installed new. Required removing control panel with switches and display, including 10 screws to get to the faceplate. Faceplate has glue on rim, so had to peel off old faceplate, remove residue, then put on new. Not difficult, but reaching to remove the screws was a little challenging in a small kitchen. Now unit looks brand new! Read more
Fix a dishwasher stuck in a continuous cycle or with non-responsive controls. This control board regulates wash cycles and timing. Moderate DIY repair.
Replaced the control panel. Very simple because you had a "how-to" video for my exact model. Read more
Fix dishwasher buttons not responding or LEDs blinking with no action. This main control board manages wash cycles, temperature, and drying functions.
I replaced the main control board kit and everthing worked like it should work. Read more
Adhesive graphic overlay that labels buttons on your range control panel. Replace when worn, peeling, faded, or unreadable to restore clear keypad labels.
Replaced the control board and panel. Read more
The range hood control panel overlay is the printed label that covers the control buttons and displays cycle options on your range hood. It provides clear marking for fan speeds, lighting controls, and other functions. Replace this overlay if the text has worn off, buttons are unclear, or if the overlay is peeling or damaged.
Pretty easy job for a DIYer. The control panel gets loose when the plastic tabs break for one reason or the other. You can replace the control board housing without having to replace the control board. Note also that the control board housing comes with a new control overlay label, so you don't need to buy the label like I did. You will need torx screw drivers or torx bit set - two sizes T20 and maybe T15. Start by remove the three metal filters (I replaced mine during this repair as they... Read more
The USER INTERFACE PANEL is an OEM part for Whirlpool brand dishwasher models. It houses the electronic controls and digital display used to program cleaning cycles and adjust settings.
Symptoms of a bad user interface panel include:
As an interface device used frequently, the panel faces wear through repetitive touch inputs. Exposure to moisture splash-back or impact damage poses other risks to components over time. Replacing it with this genuine Whirlpool part restores reliable controls.
This OEM Whirlpool replacement user interface panel is also compatible with KitchenAid, Jenn-Air, Amana, Admiral, and some Kenmore dishwasher models. Secure operation maximizes convenience cycle after cycle.
Protective label overlay for range control panels. Replaces torn, ripped, or peeling overlays. Adhesive film installs over electronic control board buttons.
This fix went great, no problems, about 15 min of work. Just a heads up: the distribution of the wires on the back of the replacement unit was pretty different from the original part (and the part photo on this website). But the wire tabs were labelled on it, so it only took a few minutes to get the wires lined up right. Works like new now! Read more
Console assembly with integrated touch pad for your dishwasher door. Replace if buttons are unresponsive, panel is cracked, or display is damaged.
Searched Google for error code, found some info indicating the touch pad was the problem. The info I found was not completely clear. I was concerned I might order a part that would not solve the problem, but with the return policy I figured it was worth the shipping cost to try the repair myself. Ordered and replaced the part. Problem solved. Read more
Replacement touchpad control panel for your dishwasher. Installs on the front door exterior. Needed when buttons are unresponsive, cracked, or worn.
After reading online I decided to attempt installing the control panel. For this particular model, I removed 4 screws at top inside (2 center are longer fyi). There is one more holding the panel in the center, but the front door panel needs to be removed. There are screws all along the inside. Remove those and slide the door panel up and out. Next, remove the last screw and then unplug the wire connector. Replace in reverse order. I did not kill the power to the unit while replacing. It however... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.