We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Dishwasher not washing or leaking from bottom? This pump and motor assembly circulates water during wash cycles. DIY-friendly, installs in 30 minutes.
I think I could have just replaced the pump, but I chose to replace the whole assembly. The part is more expensive, but all the gaskets, etc, that come with it are new and that made sense to change all at once. I was able to change this in about 30 minutes, without removing the washer from the under-counter space. I did remove the front door panel, but in retrospect that was unnecessary and probably cost me more time than it saved. Empty the washer of parts, remove the front access panel.... Read more
Washer won't drain or shows DRN code? This drain pump removes water from the tub each cycle. DIY-friendly repair with video guide included.
Its under warranty so I called Sears repair. The Technician determined the pump was bad order. After a month of waiting for Sears to order the part and the back and forth on the phone, I looked for the part myself. You guys sent the part and in 2 Days my washer is working again. No word yet, from Sears part order.. Read more
Dishwasher not cleaning dishes or cycle won't complete? The circulation pump distributes water during wash and rinse cycles. Moderate DIY repair.
Complete Replacement. The part was shipped Same day and arrived next day. Lifesaver. Read more
Washer won't drain or has standing water? This drain pump actively removes water after each cycle. DIY-friendly repair, typically takes under 20 minutes.
Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more
Reduces contaminants and odors from your refrigerator's water and ice supply. Replace every 6 months for optimal performance. Verify fit by model number.
I have replaced the LG water filter myself for the past 10 years. This time I inserted the filter, did not feel the thread was engaged, I turned the filter clockwise and no water came through the filter. So I figured that the filter head might be bad. I checked with YouTube and learned that to replace the filter head one just have to remove the housing or head, remove the water inline and outline and put it back. I used Google to search "LG water filter housing" (I did not know yet it was... Read more
Fix a washer that won't drain or shows ND error code. This drain pump assembly removes water during drain cycles. DIY repair in 30 minutes with video.
I looked up the error code on the internet and determined that the drain pump had failed. I watched the Appliance Parts Pros repair video on how to replace this part, ordered a new pump and installed it myself in less than 30 minutes. This was an easy job that saved me the price of a service call, at least one hour of labor, and perhaps a markup on the part--probably around $200.00 total. I do this kind of work around the house a lot and win points with my wife. I still haven't received my... Read more
Fix a washer that won't drain or makes grinding/humming sounds during drain cycle. This pump removes water from the tub. DIY repair in 10-15 minutes.
I noticed when we would run washer water would stay in tub. Pump would hum but not pump water out. Layed washer on its belly . Pump was at bottom of washer. Easy access . Removed 3 screws,2 wires , & 2 hose clamps. Didn't have to call Maytag Repair man. Easy Read more
Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.
Removed old filter and installed new filter. Read more
Fix washer not draining or F9E1 error code. This drain pump circulates and removes water during wash cycles. Moderate DIY repair, access from bottom.
Simple to install Read more
This is the circulation pump and motor assembly that pumps water through the spray arms during the wash and rinse cycles. It may also include an integrated heater element to boost water temperature for improved cleaning performance. Replace this assembly if your dishwasher is not spraying water, dishes are coming out dirty, or you hear unusual noises during the wash cycle.
Replaced the recirculation pump Read more
Fix a dishwasher that won't clean properly with a new circulation pump motor. This part sprays water over dishes during wash and rinse cycles.
Replaced the circulation pump and this solved the problem. Easy fix. Ran one complete cycle on dishwasher before sliding back into place. Ensure zero leaks. Read more
Washer won't drain or spin? A broken drain pump is often the cause. This part removes wastewater during the drain cycle. Takes about 20 minutes to replace.
It was fixed by one of my staff by simply changing the pump which was not difficult for him. Read more
The Vent Blower Assembly is an OEM part for Frigidaire dishwashers. It is designed to help ventilate the dishwasher by expelling hot, moist air from the interior after the washing cycle.
You should replace the vent blower assembly if it becomes faulty. Causes of a bad vent blower assembly can include regular wear and tear, blockages from debris, or electrical issues. A malfunctioning vent blower can lead to poor drying performance and excessive moisture inside the dishwasher.
Symptoms of a bad vent blower assembly include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I had an appliance repair guy come and he told me it was possibly the vent assembly but if changing it didn't fix the problem it would be the control board next. He felt it was not worth the money to repair because he would have to disconnect everything just to get to the vent on the right rear top of the dishwasher. When i took the DW out thinking i had to buy a new one i saw this part was stuck open and covered in limescale deposits and grime.I ordered the part from appliance pros and payed... Read more
Washer won't drain or shows ND error? This drain pump assembly fixes drainage failures and clears error codes. DIY-friendly, takes about 20 minutes.
I ordered the part (drain pump assy) from AppliancePartsPros.com and it was delivered to my house in 2 days. I called a friend to install it for me but....he never showed up. So I decided to do it myself. I watch the video that another Appliance Part customer suggested and it was extremely easy even for a seasoned woman as myself. It only took me about 20 minutes. Test load was perfect with no errors. This morning I'm on load 5 and still no issues. Thanks Appliance Parts hopefully I won't ever... Read more
Connects water filter to refrigerator system for clean water and ice. Replace if leaking, water flow is slow, or filter won't seal properly.
First we tried to change the filter. Water was leaking from the area of the filter when we changed the filter. We purchased an "original" Fridgidaire filter, no change. Did some research on the internet and decided to change the two tubes and the filter valve (at the back of the filter housing). Must have been the right diagnostic and the right part to make the repair, Gave me an opportunity to clean the condenser coils as well. After 6 years of service they needed it badly. Read more
The Accumulator is an OEM part for Whirlpool dishwashers. It is designed to manage and distribute the water flow within the dishwasher, ensuring optimal water pressure and cleaning efficiency.
Causes of a bad accumulator can include wear and tear over time, buildup of mineral deposits or debris that block the water flow, or damage from high water pressure or accidental impact.
Symptoms of a bad accumulator include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
The hardest part was getting on my knees to do the repair/replacement. It was obvious debris wasn't being filtered out when the water was recirculated. I noticed the accumulator wasn't seating right and found the plastic clips on the backside were bent and worn. The new part came within a day and a half. Everything either unscrewed and snapped together with no tools. You may want to use a flat screwdriver to take the upper arm tube feed loose from its clips but it can be done by hand. Done... Read more