Power Small Engine On-Off Switch Parts
Genuine Ge part
By: Ge
Part Number: WE04X25201
Dryer won't shut off or gets too hot? The cycling thermostat regulates temperature during the cycle. DIY repair with video guide, typically 1 hour.
Do-It-Yourself Stories from Customers like You
High temp sensor blew out drier would not light. Gary H. • Boonville , NY • May 16, 2020
Did continuity tests on the sensors, till I figured out what one was bad.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7403P239-60
Fix a burner stuck on high or an indicator light that won't turn off. This infinite switch controls heat settings on electric range burners. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
The right front "large' heating element was in high heat mode rotating the control knob to a lower heat setting would not reduce heat Jack D. • Roanoke , VA • November 17, 2014
1. Went online where I watched video about heat control for this Maytag. I then found AppliancePartsPros using Google. I ordered the part and In three days the part arrived. I installed the part and now the problem has been corrected.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC61-02627A
The Dryer Moisture Sensor is a reliable component designed to ensure your dryer operates efficiently. This genuine OEM part accurately detects moisture levels in your laundry, allowing the dryer to adjust drying times automatically. By maintaining optimal moisture sensing, it helps prevent over-drying and energy waste, ultimately saving you time and reducing utility costs. Compatible with a wide range of Samsung dryer models, the Dryer Moisture Sensor guarantees a perfect fit and seamless integration into your appliance. Installing this sensor can restore your dryer's performance, ensuring your clothes are perfectly dried every cycle. Trust in this genuine OEM part to enhance the functionality and longevity of your Samsung dryer, providing you with dependable and efficient drying results.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Ran for 5 to 7 seconds and stopped. Paul K. • Dayton , TX • November 04, 2017
I researched the issue on You tube and found out it could be either the "belt broke switch" or the Moisture sensor. A friend who was an appliance mechanic advised "since you have to take it all apart anyways, its best to replace the belt, spring, and Idler wheel" I bought the 5 item for $52. I watched the video on the AppliancePartsPros for changing out the belt and I replace all items on the list. Took 1 1/2 hrs and was fixed on restart!! * Wear gloves, the sheet metal is very sharp edges!*
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10383615
Evaporator coils freezing up or freezer not defrosting? A faulty thermistor may be the cause. This temperature sensor regulates defrost cycles. DIY repair.
Do-It-Yourself Stories from Customers like You
The freezer was working but the refrigerator compartment was way too warm. Martin T. • Brookfield , IL • July 26, 2020
I tried to buy a new refigerator, but strangely none of the major stores had anything I wanted in stock. The earliest delivery date for a new unit was over a month away.
At that I decided to try and keep this one running. I did online research into common refigerator problems.
I found the cooling coils in the freezer were covered in a block of ice and frost. The refigerator was not going through a defrost cycle. With a hair dryer I thawed out the coils. The refigerator worked fine for...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DG44-01007B
Burner stuck on high or won't heat? This triple burner switch restores proper temperature control. Many DIYers report a 5-minute fix for this issue.
Do-It-Yourself Stories from Customers like You
The triple burner on my stove would remain on high no matter the placement of the knob Rodolfo P. • Hialeah , FL • January 15, 2021
I replaced the energy regulator.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1053
Dryer won't start or stops heating? This thermostat and thermal fuse kit fixes no-heat and no-power issues. Easy 30-minute repair with video guide.
This part fixes the following symptoms
-
Too hot
-
Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You
Thermal fuse blew due to lint blockage Louis L. • Philadelphia , PA • March 21, 2017
I posted the following on the Facebook page ;
SOoooo my 10 year old clothes dryer stopped and like almost everyone else I just figured it's shot, burned up, gotta get a new one. Well, due to a few bumps in the road I cannot afford another problem. My 2 vehicles are not running and with one being in the shop for 3 weeks and not being able to afford a rental car anymore this dryer was another headache. It sat for weeks and laundry started piling up. While looking online for sales somehow I...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10146
Burner won't turn off or stays on when set to off? This surface burner infinite switch controls heat levels. Takes 10-15 minutes to replace.
Do-It-Yourself Stories from Customers like You
Burner wouldn't turn off Bryan S. • Saint Louis , MO • May 06, 2016
Replaced switch! Easy....
Read more
More
Genuine Lg part
By: Lg
Part Number: 6931EL3001E
Dryer not heating or overheating and shutting off? This thermostat assembly regulates temperature to prevent damage. Easy DIY repair in about 1 hour.
Do-It-Yourself Stories from Customers like You
It wouldn't heat James C. • Mooresville , NC • June 29, 2019
After I cleaned out the typical 1.5 pounds of lint from the vent, ( I do it every 2 months), I went searching for a solution. I found 6 possible causes on this site and purchased everything except a new burner; I wasn't going to go that far. Let the fun begin. Since my vacuum was still nearby, I thought I was ready for anything. Wrong. After I watched all the videos again for reassurance, I went in with screwdriver in hand and laptop nearby. I removed the top and looked inside. Don't be fooled,...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M137
Dryer shuts off too soon or won't heat? A faulty high limit thermostat often causes premature shutoff. Simple DIY fix—usually takes 15 minutes or less.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer would turnoff prematurely Ruben S. • Corpus Christi , TX • March 13, 2016
Changed out high limit thernasstat
Read more
More
Genuine Ge part
By: Ge
Part Number: WR23X10783
Water or ice dispenser not working? This dispenser switch activates when you press the lever. Easy DIY repair—takes about 30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Bad water dispenser micro switch on my ge fridge James G. • Melbourne , FL • November 23, 2014
After disconnecting power to the fridge, I first removed the ice maker/water dispenser/fridge control faceplate. This easily popped out using a flat head screw driver. Then disconnected the 3 wire harness connections to the control board. I next removed the plastic dispenser housing shield. There's only 4 screws that hold this on. Finally, I removed the Micro-switch, disconnected the two wire connectors and installed the replacement switch and reinstalled everything. The repair took only...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694674
The Cycling Thermostat is an OEM part for Whirlpool dryers. It regulates and monitors the temperature inside the dryer during the drying cycle. It ensures that the dryer doesn't overheat and prevents potential damage to clothes or the dryer itself.
Causes of a faulty cycling thermostat can include wear and tear over time, electrical issues, or sensor malfunction.
Symptoms of a bad cycling thermostat may include:
- Clothes taking longer than usual to dry
- Inconsistent drying results
- Overheating or burning smell
- The dryer not heating at all
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too hot
-
No heat or not enough heat
-
Shuts off too soon
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer not heating properly Hashem N. • Los Angelos , CA • October 26, 2014
This Maytag dryer was bought in 1985 if memory serves. It has worked hard with few repairs done by yours truly over the years.
Thanks to the engineering and excellent design by Maytag staff, removing parts are relatively easy.
Once I opened the unit, I found it to be full of lint. I cleaned the entire inside and the vent pipe duct work.
I found the blower wheel assembly worn. Though it was not cause of my problem, I decided to change it along with the igniter, heater relay and the fan belt. I...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134587700
Dryer not heating or overheating? A faulty control thermistor may send incorrect temperature data to the control board. 30-min repair with video.
Do-It-Yourself Stories from Customers like You
Constant beeping dryer kept restarting Jimmy L. • Del City , OK • February 15, 2015
Replaced control board. Did not need Control Thermistor in my case, but I'm keeping it as backup. Got the Drum Belt just in case it breaks on me since the dryer is aging.
To replace control board:
Disconnect power and pull dryer away from wall.
Take 2 black screws on the back off to remove the top lid.
Remove 2 screws on top that hold the control interface on.
Remove 2 screws on the bottom backside of the control.
Pull out control panel and pull off terminal connections and push to remove...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB21X36771
The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.
Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.
Symptoms of a bad Infinite Heat Switch include:
- Burners not heating to the desired temperature, either staying too hot or not getting hot enough.
- The burner not turning on at all, indicating a possible failure in the switch's electrical contacts or circuit.
- Inconsistent cooking temperatures, where the burner cycles on and off too frequently or not often enough, affecting cooking performance.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had previously replaced one burner control because the burner indicator light stayed on William A. • Dodge Center , MN • July 13, 2015
I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking
as it cycles - it should be replaced.
I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DG44-01006B
Burner stuck on high heat or won't adjust temperature? This dual surface element switch restores precise heat control. DIY repair in about 30 minutes.
Do-It-Yourself Stories from Customers like You
Regulator not working. John Q. • Denver , CO • January 23, 2022
Simple remove and replace.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10269460
Microwave won't start or shows door error? A faulty door switch prevents operation when the door isn't detected as closed. DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR23X31507
Fix interior lights that won't turn on, stay on constantly, or delay when opening the door. This switch replacement takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Water tank leak Gordon T. • Jonesboro , AR • January 27, 2017
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a...
Read more
More