Tank Ce Small Engine Regular Starter Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508629
Refrigerator won't cool or compressor hums but won't start? A failed start relay prevents the compressor from turning on. DIY fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
The power was still on but the unit no longer cooled Kimberly B. • Santa Ana , CA • March 09, 2018
We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question.
Read more
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Genuine Ge part
By: Ge
Part Number: WR09X10106
Refrigerator won't cool or compressor clicking? The overload and start relay protects and starts your compressor. DIY fix in 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Overload was smoking Ken P. • Kent , OH • December 13, 2018
Replaced overload, and capacitor
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 5309918806
This door-activated light switch controls the interior lamp in your refrigerator. Replace a worn or sticking switch to restore dependable lighting and prevent the bulb from staying on and warming the compartment when the door is closed.
- Opens and closes the light circuit as the door is opened and closed
- Helps prevent the light from staying on with the door shut
- Common symptoms: interior light won't turn on, stays on with the door closed, or works intermittently
- Physical signs may include a stuck/broken plunger or damaged housing
What's included: One light switch Install notes:
- Disconnect power before servicing
- Gently pry the old switch from the liner/panel and release its locking tabs
- Transfer wires one at a time to the same terminals on the new switch
- Press the new switch fully into place; restore power, and test
Do-It-Yourself Stories from Customers like You
Light didnt turn on Robert R. • New Britain , CT • May 25, 2015
Well started with the bulb switch when that didn't work, i continue with the next switch which was the door switch, then it worked just make sure the light bulbs are good, because i went thru 4 bulbs
Read more
More
$37.53
- Compare At:
-
$44.66
- You Save:
-
$7.13
Genuine Lg part
By: Lg
Part Number: 6750C-0004R
The Compressor Overload Protector is an OEM replacement part for LG refrigerators. It plays an important safety role in protecting the compressor from damage due to excessive heat. Located near the compressor unit, the overload protector functions to shut off power to the compressor if temperatures become too high during operation.
Causes can include normal wear over time rendering it less responsive to temperature changes. Mineral or refrigerant deposits may also impede its ability to detect overheating conditions accurately.
Symptoms of a faulty overload protector include:
- Refrigerator fails to properly cool or the compressor does not run
- Circuit board or electrical component failure or burnout
- Lack of cold air production and higher than normal freezer/fridge temperatures
This OEM LG part is also compatible with some Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Not cooling Paul B. • Frederick , MD • January 15, 2017
8 y/o LG unit was not cooling or freezing. There was a clicking on the back side every 2-3 minutes. Used these 2 issues in a internet search and top 2 cited problems were dirty coils then bad PTC & OLP. Tool off the back panel, compressor was quie hot. Coils did not look excessively dirty but cleaned them anyway. DId not resolve the problem. The OLP & PTC recommended for my unit. were different than the original TSD and I thought I would have to return the parts. However, I got on a chat...
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W11168758
The Reservoir is an OEM part for Whirlpool refrigerators. It is designed to store and dispense water within the refrigerator, typically connecting to the water dispenser and ice maker. This reservoir ensures a consistent supply of water, facilitating the production of ice and providing chilled water for consumption.
Causes of a bad reservoir can include mineral buildup from hard water, cracks or leaks due to wear and tear, or contamination from foreign particles.
Symptoms of a bad reservoir include:
- Water leaks inside the refrigerator
- Reduced or no water flow to the dispenser or ice maker
- Odd tastes or odors in the water
- Ice production issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water was leaking from the upper part of the refrigerator into the refrigerator compartment Floyd S. • Waipahu , HI • October 17, 2015
The storage device for water had a cracked fitting so when either the water or ice solenoid was activated the water ran into the compartment. I replaced the storage device (reservoir) once I figured out how to remove the upper cover in the top of the refrigerator. I needed to remove two screws located by the water filter these are the only fasterners needed to be removed, after that you need to pry down on the entire cover which is snapped in place, disconned the electrical connections and your...
Read more
More
$68.95
- Compare At:
-
$82.05
- You Save:
-
$13.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10411937
Dryer won't start or run? A faulty belt switch often causes this when the belt snaps or slips. This switch monitors belt tension and is a fairly easy fix.
Do-It-Yourself Stories from Customers like You
Drum wouldnt turn power to control panel but wouldnt start Andy S. • Arlington , VA • November 03, 2016
Replaced motor "triple switch" Part Number: AP6021090 and the thermal fuse
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Ge part
By: Ge
Part Number: WR17X12793
Stores chilled water inside your refrigerator for the door dispenser. Replace if cracked, burst, or leaking along the seams to restore proper water supply.
Do-It-Yourself Stories from Customers like You
The water tank had frozen and busted along the outer seam so water would spray out of it Justin B. • Louisville , KY • April 21, 2025
Replaced the water tank
Read more
More
$58.34
- Compare At:
-
$69.42
- You Save:
-
$11.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W11050715
This replacement switch restores reliable on/off signaling to the circuit it controls, helping your appliance start, stop, and respond correctly. A worn switch can cause intermittent operation, no response, or lights and functions that don't activate. What it does:
- Provides an electrical open/closed signal to enable functions like starting a cycle, powering a motor or light, or shutting a feature off
- Acts as a safety/position interlock (such as door, lid, float, or hood) depending on the model
- Typical symptoms include won't start, won't stop, light won't turn on/off, or intermittent operation
- Can be checked with a multimeter for continuity when actuated
What's included:
Install notes:
- Disconnect power before servicing; turn off gas or water supply if applicable
- Access the switch, note wire locations, and transfer leads one at a time to the new switch
- Mount securely, ensure the actuator aligns and wires aren't pinched
- Reassemble and test operation before finalizing
More
$9.49
- Compare At:
-
$9.54
- You Save:
-
$0.05
Genuine Ge part
By: Ge
Part Number: WR08X10112
Fix compressor clicking every few minutes or fridge not cooling. This start relay and overload combo helps your compressor start and prevents overheating. Easy 5-minute fix.
Do-It-Yourself Stories from Customers like You
Constant clicking sound from behind refrigerator and compressor would not kick on all the time freezer temp was above the desired temperature Peter H. • Bayside , NY • May 10, 2016
I replaced the old capacitor and combo device after watching repair video. Took less than 5 minutes and now my ge profile refrigerator is running perfectly.
Read more
More
$104.57
- Compare At:
-
$123.39
- You Save:
-
$18.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304470340
Fix a humming compressor that won't start by replacing this capacitor. Restores proper startup and cooling. DIY-friendly repair under 30 minutes.
Do-It-Yourself Stories from Customers like You
The power was still on but the unit no longer cooled Kimberly B. • Santa Ana , CA • March 09, 2018
We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question.
Read more
More
$14.71
- Compare At:
-
$14.98
- You Save:
-
$0.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399640
Dryer won't heat or overheats on low settings? A faulty temperature selector switch prevents proper heat control. Easy DIY fix in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Dead no power. Peter W. • Northfield , IL • January 29, 2024
APPs stellar videos got me started with confidence. Your parts diagram exactly match mine for my 28 year old Sears Kenmore Gas Model 110-97588210 (75882). Teacher at TMM Appliance convinced me to approach from the simpler, cheaper, easier to access parts inwards using the wiring diagram. I’ve designed products for Klein, Halo, and JUNO but am just an advanced electrical amateur. 3 parts totaling $110 and two hours and it runs and heats to spec. Even had time to vacuum out all over the lower...
Read more
More
$62.61
- Compare At:
-
$74.51
- You Save:
-
$11.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 242220208
Routes water from supply to filter housing inside your refrigerator. Replace if damaged, cracked, or leaking to restore a secure water path.
Do-It-Yourself Stories from Customers like You
Water leaking pooling up on the bottom of fridge and underneath Joe K. • Slingerlands , NY • December 15, 2014
Pulled shelves, filter, and filter housing, removed back panel, disconnected water line. Ran new line from water tank to valve, hooked up at filter housing. Cauked the hole where the lines go through.
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872
This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.
- Provides precise resistance to reduce voltage/current in the designated dryer circuit
- Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
- Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
- Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
- Disconnect power to the appliance before servicing
- Access the console/wiring harness and note original wire routing
- Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
- After installation, run a test cycle to ensure proper operation of the affected function
Do-It-Yourself Stories from Customers like You
Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016
I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use...
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27
Genuine Ge part
By: Ge
Part Number: WE4M411
Dryer won't heat or overheating? The temperature switch controls heat settings. DIY-friendly repair—just swap wires and reassemble. Takes 20 minutes.
Do-It-Yourself Stories from Customers like You
The timer was sticking to the point where the knobs were stripping out Peter A. • Dallas , OR • December 16, 2014
I unscrewed the 3 Phillips screws on the back of the dryer controls housing, then it folds forward for access to each control switch. the old one popped out, and I swapped the wires using a needle nose pliers, one by one, from the old switch to the new switch. The part was an exact fit, and popped right back into the housing. I screwed the 3 screws back in, pushed on the new knob, and it looks and works like new !
Read more
More
$64.70
- Compare At:
-
$76.99
- You Save:
-
$12.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 216594300
The Starter is an OEM replacement part for Frigidaire refrigerators. This component is crucial for initiating the compressor, which is responsible for cooling the refrigerator. The starter works by providing the necessary electrical power to get the compressor running, ensuring that the refrigerator maintains the correct temperature.
Causes of a bad starter can include electrical malfunctions, wear and tear over time, or damage from power surges. A faulty starter can prevent the compressor from starting, leading to cooling issues.
Symptoms of a bad Starter include:
- The refrigerator not cooling properly
- The compressor not running or frequently cycling on and off
- Unusual clicking or buzzing noises from the compressor area
- The refrigerator being warmer than usual or food spoiling quickly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Overload protector done its job we had not defrosted the freezer for a long time causing the compressor to run more than it should it got overloaded found it defrosting Wanda L. • Belle Rose , LA • December 09, 2014
First checked the power then took off the compresser connections cover looked for burnt wires or loose or disconnected wires they were none of those I then removed the wires from the starter an overload protector removed them checked both for contunuaty overload protector no contunuaty then I checked the 3 poles on the comp. for contunuaty they were ok then I checked each pole to ground on the com. to final check that the comp. was still good
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W10702726
Dryer won't start but lights work? A faulty door switch prevents operation. This replacement switch restores normal function in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Broken door switch Jason D. • Troy , IL • March 23, 2019
Ordered replacement, easy swap out. Less than 10 minutes.
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50