Drum Support Roller Parts
Genuine Lg part
By: Lg
Part Number: 4581DD3003C
Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
I was missing a wheel on the lower dish rack Ron R. • Goode , VA • August 20, 2015
Ordered the part and snapped it on.
Read more
More
$16.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WD12X10244
Secures and rotates the lower spray arm inside your dishwasher tub. Replace if the mounting tab is broken, cracked, or won't hold the spray arm securely.
Do-It-Yourself Stories from Customers like You
Broken spray arm Robert F. • Port St Lucie , FL • September 20, 2014
I did not know how to remove the broken spray arm so when I muscled it out, the spray arm base broke. We ordered the replacement parts from appliance parts pros and received them within 2 days. I looked online to find out how to remove the spray arm base. I removed it be unscrewing the base, screwing the replacement base, and then snapping in the new spray arm. We tested the dishwasher and it worked just like it was new. Another new task learned and completed!!
Read more
More
$77.76
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 134417000
The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.
Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.
Symptoms of a bad seal include:
- Increased drying time as heat escapes
- Excess lint and moisture accumulation inside dryer components
- Visibly worn or cracked seal edges
- Cool air leakage noticed around the door when the dryer is running
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014
Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will...
Read more
More
$19.75
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WH08X24594
Seals the gap between outer tub and wash basket to prevent leaks. Replace if water leaks from bottom during wash cycles. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Water leaking from bottom of washing machine Alex P. • Coram , NY • July 25, 2015
I will say that the GE Washer/Dryer combo is nice if you need to save space, but trying to fix it was far from "fun". It took several hours to get to the location of the Seal Tub. First the dryer had to come off the top, then pretty much every bit of the internals needed to come out too, The seal could not be accessed from the bottom of the machine, and it wasn't easy to get to it from the top. If you have patience, and keep track of everything you did, so you can undo it, the project can be...
Read more
More
$28.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WB56X35363
The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.
Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.
Symptoms of a bad Mounting Plate include:
-
Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.
-
Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.
-
Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
$18.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304523155
Supports and guides the dryer drum as it rotates. Replace if the roller is cracked, worn, or causing noise. Sold individually, not pre-assembled.
ROLLER KIT. INCLUDES 5304523151 SHAFT, 5304523152 ROLLER, 5304523153 NUT 5304523154 SPACER.
Do-It-Yourself Stories from Customers like You
Drive motor made a loud noise then shorted out Kevin H. • Pennsauken , NJ • December 18, 2025
I ordered a new motor.
Read more
More
$79.31
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268645
Replacement wheel assembly for dishwasher lower rack. Snaps onto rack to allow smooth gliding along tracks. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Parts were missing from the dishwasher lower rack Carl P. • Glendale , AZ • March 18, 2017
Parts snapped into place very easily. Appliance Parts Pros have always delivered on the right part, timely delivery and videos to help. I wouldn't go anywhere else.
Read more
More
$50.57
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Lg part
By: Lg
Part Number: AJK72909307
Suspension rod kit for washers. Supports the drum and reduces vibration during wash and spin cycles. Replace when rods are broken, worn, or damaged.
Do-It-Yourself Stories from Customers like You
Washing machine was knocking while in spin cycle. Lonnie B. • Blythewood , SC • October 13, 2017
One of the suspension rods was not working so I replaced the bad one and the other three . Tub has now leveled out and is spinning properly without making the noise. Have not needed to replace the pump but will do so if necessary. Thanks to Appliance Parts Pro for their prompt service and quality products.
Read more
More
$144.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Samsung part
By: Samsung
Part Number: DC97-16350D
Suspension damper rod assembly installs at the corners of the tub. Replace if cracked, broken, or worn to restore proper tub support and stability.
Do-It-Yourself Stories from Customers like You
Dc error code Genaro O. • Houston , TX • October 19, 2015
Washer started every cycle just fine. With just 9 minutes left on the cycle, when it started the spinning cycle it would stop and on the display showed a DC error code and it would kick the cycle to the beginning of the wash. After asking around and doing a little you tube research I called appliancepartspros.com and ordered http://www.appliancepartspros.com/samsung-assy-damper-owm-dc97-16350d-ap5579032.html ordered all 4. Replaced them and after that it the washer it being working just fine....
Read more
More
$53.44
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8270019
Replacement roller for dishwasher upper rack. Allows rack to glide smoothly in and out. Needed when roller is cracked, worn, or broken from regular use.
Do-It-Yourself Stories from Customers like You
Rollers on top slide out tray Jeff G. • Mechanicsville , VA • January 06, 2019
Slide diswasher out to reach the two screws that hold rollers. Reverse prcess, all done.
Read more
More
$11.78
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385089
The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes.
Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles.
Symptoms of a bad upper dishrack rail include:
- Difficulty inserting or removing the upper rack smoothly
- Off-track movement that impacts washing coverage
- Detached ends or segments that compromise stability
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Wheels my top dishwasher rack fell off Paul M. • Ramona , CA • September 11, 2020
Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros!
Read more
More
$58.43
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Speed Queen part
By: Speed Queen
Part Number: D516792
Idler lever assembly with bearing and wheel for dryers. Maintains belt tension for smooth drum rotation. Replace if cracked, worn, or causing squeaking.
Do-It-Yourself Stories from Customers like You
Squeaky idler wheel Jon C. • Tyler , TX • August 09, 2025
Replace idler wheel assembly, belt and spring.
Read more
More
$36.40
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-3705180
Pivoting bracket arm that suspends the idler pulley and routes the drive belt in your dryer. Replace if cracked, bent, or worn to restore proper operation.
Do-It-Yourself Stories from Customers like You
Screeching metal on metal Brian M. • Louisville , KY • August 09, 2015
I replaced drum rollers, axle shafts and front bearing kit. Still had noise. Ordered Idler Arm, Belt Tension Pulley & Washers. I ordered parts at 3:30 pm on a Wednesday, received new parts at 11:30 am Thursday. The instructions & videos were very simple to follow and provided excellent tips. Back up and running with silence in an 1/2 hour. My 13 year old dryer is running like new again. Way cheaper than calling a repairman.
Read more
More
$55.30
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 807145201
Secures the lower spray arm in place. Replace if tabs are broken, worn, or missing, causing the spray arm to detach or not lock down properly. Installs under filter.
Do-It-Yourself Stories from Customers like You
Poor washing performance Gerald W. • Tucson , AZ • August 27, 2019
Replace the sprayer in the middle of the dishwasher, the problem was the grommet on the back of it but it's not available individually.
Read more
More
$30.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WH16X10158
Suspension rod and spring assembly that supports and stabilizes the washer tub. Replace if rod is broken, spring is worn, or assembly is damaged or missing.
Do-It-Yourself Stories from Customers like You
The washer was not staying balanced in the spin cycle Angela W. • Manawa , WI • February 07, 2016
I replaced the suspension rods -- I am NOT particularly experienced with machines of any type, so it took me longer than it might have someone else, but once I figured out what I needed to do, everything went very smoothly. The washer spins like a dream now!
Read more
More
$37.68
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: W11415987
The Shock Absorber Washer is an OEM replacement part specific to Whirlpool-brand washing machines. It is a hydraulic device that absorbs the vibrations of the outer washer tub. Note: This is only one shock absorber.
Symptoms of worn or cracked shock absorber washers include:
- Noisy operation as the washer shakes or moves during cycles
- Physical signs of deterioration
- Over time, increased stresses can damage connected components
Causes involve many cycles of compression and release and solvents inside the washer degrading natural rubber. Deteriorated washers no longer absorb vibrations properly.
This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Washer drum banging loudly against sides Anthony K. • Leander , TX • February 09, 2019
Replaced all 4 shocks.
Read more
More
$72.95
IN STOCK
Most orders arrive by Tuesday, November 24