Object Stack Blower Wheel Parts

• Noisy

I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more

Replaced the right and left front upper dish rack wheels. The best part was I ordered the parts Monday and had them first thing Tuesday morning. Read more

1, Removed roller tray front stoppers from each side. 2. Pulled out empty top rack from dishwasher. 3. Removed existing top rack roller. 4. Inserted new roller where old one was located. 5. Repeated for each roller. 6. Inserted top rack back into dishwasher. 7. Enjoyed using both racks again!! Read more

Replaced the entire Drive set, even the motor that was not broken. The six quart 6000 HD is running like new. We broke it, your parts fixed it. Of course takes a little know-how on our part as well. Thank you! Read more

The vertical shaft showed a slight bend so I replaced the bent shaft with a new shaft. I should have done that when I was replacing the gears. Although we have not mixed any more bread, I ran the mixer at a both low and high speeds for several minutes without any more gear clashing noises. It now purrs ! The top bearing on the original vertical shaft had slipped down the shaft when I first examined it. This may have been the source of all of my problems with this mixer. It may have been... Read more

• Oven not heating evenly
• temperature not accurate

First I did a search for my model stove, I read the discriptions of what it was doing and came to the conclusion it was the fan motor. I then called an appliance dealer in my local area to find out that the fan motor cost all most double what I could get it online. I called to see how much it would cost to have a repair man come out and fix it, which would have cost 260 dollars. So in one of the suggested comments that someone previously left it stated that it could be done in about 20... Read more

Upon removal of the lower inspection panel on the front of the machine, my 20 year old son thought the motor was bad by the smell. But he did discover what turned out to be the belt tensioner pulley laying inside the machine. After he pronounced it dead, without a thought to the idler pulley, I looked at the machine and determined the lack of movement was due to the idler pulley having "fallen" off the shaft by looking at the illustrated parts break down provided on this website. Ordered the... Read more

I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive... Read more

• Noisy
• Tray won't turn

Removed 8 screws from bottom panel on microwave. Pulled two prong plug off old motor. Read supplied voltage off motor decal and tested for it. Deemed motor to be bad and changed it. Works great. After tearing old motor apart it seems a liquid got in there from inside microwave. No seal on motor. Bad design flaw in my opinion. Read more

Purchased 2 replacement feet risers. A very awkward repait. Read more

Drawer was reordered and replaced...fast! Read more

Thanks to Appliance Parts Pros, who took the time and made the effort, they found me a replacement part for my dishwasher. Read more

• Will not tumble

Replaced the tension pulley assembly, drum rollers, drum roller axles, belt, and drum glides while I had the dryer disassembled. It turned out that the cause of the squeak was the tension pulley assembly, however it was easy and economical enough to replace anything that could have been the cause of the squeaking while I had the dryer apart. The parts were ordered on Thursday afternoon and delivered on Friday. I had the dryer repaired and running like new in no time. For about $100, it was... Read more

Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more

Replaced complete roller- screw,wheel and axel. Easy job Just recently I had to replace upper spray arm. I ordered assembly from you and was completely satisfied with your service and price, that was over 1/2 of what local appliance repair dealer wanted. Very satified with how to do video on this project Read more