Dmt800rhs/Aa Parts

Very smooth. I ordered the door and the control panel. It is helpful to have an extra set of hands when removing the screws from the door or place something under it so it doesn’t drop. The door comes off with about 10 screws. They are different length. Short screws go into steel, long go into plastic. Remove the door and upper facia/control panel. You’ll need to disconnect the wires. The panel has two parts that need to be transferred. 1. The electronic panel. It’s white and has a row of... Read more

Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more

• Leaking

I just had to pull the old out and push the new one in. Read more

• lights flashing or blinking

Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more

• Will not fill with water
• overflowing

Initially we discovered the LE code was due to water in the base due to the over flow. Of course my warranty was up and 1 month later the DW finally stopped with this error. We pulled out the DW and soaked up the water in the sensor on the right side base where it collects water. This got rid of the LE error code. The LE error kept making the drain go constantly so we had to turn off the power in order to stop the draining. The drain activity would go constantly even after opening the door... Read more

Bought 2 new wheels and it works perfectly. Yay! Read more

I replaced the water level sensor on the side of the dishwasher. Had to completely take out dishwasher and set on its side. Removed three hose clamps and three electrical disconnects. I have hard water and it looked like the float inside of the sensor wasn't moving properly. Read more

Purchased a new sensor and drain hose. Had it in 2 days. Took me a little over an hour to diagnose what I thought was problem, 20 minutes searching online for parts and 1 - 1/2 hours to fix (but I am 47 yr old woman who has never worked on a dishwasher before and not handy at plumbing). Working now - without a BIG repair bill and down time waiting for parts to be ordered by repairman. Read more

Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more

After researching the Internet, I thought the drainage hoses were my problem. First I changed both drainage hoses. That didn’t solve the problem. I had to look for another area that was causing water to drip into the pan. I found water leaking from behind the brake assembly. Since I didn’t get an oE error code, I eliminated the brake assembly as causing my problem. I ordered a brake gasket and cover. Once I got it properly installed, problem solved! Read more

Replaced both left and right ropes Read more

Parts arrived faster than promised. I unscrewed both holder screws. The new arm snapped right in the new holder. Then screwed the new arm holder assembly back in to the dishwasher. The repair took only a couple minutes and dishwasher is working again. I am very satisfied with purchase and shipping speed. Read more

We took apart the filter and scrubbed out all effected areas. During the process we ended up damaging the original filter and needed to order a new one which is where APP.com came in. We were able to restore our dishwasher to working condition the next day as the shipping was extremely quick. Read more

Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more

Started by replacing the upper and middle spray arms. After that no change, dishes in the upper rack not clean. Suspected low water pressure was causing the problem. Next, I replaced the water delivery tubing. Still no change, in fact now the dishes in the lower rack were not getting clean now. Next, I decided to replace the impeller. After removing the water supply tubing and the cover I now had access to the impeller. The inspection of the impeller didn't reveal any problems. Next, I removed... Read more