Ge Control Panel Lcd Parts

• Ice maker not making ice
• Ice maker won't dispense ice
• Leaking

Much easier than expected, I was certain it had to be a water line but the solved everything Read more

Replaced control board myself. Easy. Read more

• Shuts off too soon

After taking the timer apart to see why it would not turn I found the timer motor was jammed. Taking the motor apart I found a broken gear. Looked up the model number of the dryer and found a new timer assembly thru appliancepartspros.com I ordered, a very easy process, received the part 2 days later. Installed the assembly in about 5minutes and had the dryer back up and running Read more

This repair doesn't require too much thinking, been a sticker you just have to take put the old one and stick the new one. Read more

• Timer will not advance

Replaced the timer unit and knob. Read more

I have an 11 year old GE Monogram side by side built-in fridge that had been having cooling problems intermittently. The fridge would work for a day and then the compressor would not come on for 8 hours and temps would rise to the upper 20s in the freezer. Fans, lights, and everything else appeared to be functioning properly. It went like this for a few weeks and we put it off until the compressor decided not to come on at all for a full day. Being barely able to use a multi-meter, I watched a... Read more

Replaced the knob and timer. We didn't need the knob insert, because it was included with the knob which we didn't know this. Read more

• Fridge too cold
• Fridge runs too long

I went on you tube to try and figure out what might be causing this problem. It seemed that the problem was either the temperature thermostat or the defrost timer. I figured that seeing as I had never ever seen any frost in the freezer that the problem probably wasn't the defrost timer. So I ordered the temperature control thermostat, received it the very next day and in ten minutes removed the old one and installed the new one and we were good to go. It's been working just fine for the last... Read more

My Advantium worked fine except the clock and cooking instructions were dim and bounced in a circular pattern over the left side of the display. I tried unplugging it and once or twice that seemed to help. When I finally decided to take the control panel off I had a difficult time until I saw an old remark from a 2009 forum discussion from a guy that said there were about a dozen screws to remove to get to the control panel. That meant the entire cover had to come off! Wow! Glad I didn't break... Read more

First I replaced the flickering digitron after reading elsewhere that it may be just a weak display. The new digit on was still flickering but a little differently. Our oven was still working with either display until suddenly it wasn't one morning. After finding AppliancePartsPros and reading that others had to go further by replacing the transformer and power boards, that's when I looked closer at those parts. There was some smoke evidence on the cover over the transformer and the back of... Read more

First I replaced the flickering digitron after reading elsewhere that it may be just a weak display. The new digit on was still flickering but a little differently. Our oven was still working with either display until suddenly it wasn't one morning. After finding AppliancePartsPros and reading that others had to go further by replacing the transformer and power boards, that's when I looked closer at those parts. There was some smoke evidence on the cover over the transformer and the back of... Read more

• Won't start

I am a 76 year old woman and hesitated to tackle the job. But my son sent me a Utube video "how to replace the board," and I was able to replace it, surprisingly, quite easily. I could have done it in a shorter period of time, if I had not been challenged with these arthritic hands and fingers. The refrigerator is now holding the temperatures quite nicely. Joan Read more

I first received the quality parts in less than 2 days. It took me 5 minutes to change out the timer and 2 of the minutes were finding where my fiancée put the Phillips head screwdriver. Unplug dryer first, remove top three screws from back panel. Pull old timer up and out, have new timer in hand and transfer one wire at a time. Once all wires are transferred, snap the new timer in its place. Replace your three screws, put knob on timer. Plug in dryer and test. Once completed, cleanup your... Read more

Ordered both parts and got them in 2 days, removed 3 screws on back panel of dryer and removed defective timer , installed wires on new timer and put back in place and installed new knob , very easy repair only took 10 minutes and dryer was back up and running Read more

Replaced the timer switch and knob. Read more

• Touchpad does not respond
• Will not program

I found exploded parts view of oven and looked for oven sensor probe and control card parts. I also looked at great videos and read past repair stories. I decided the problem had to be one of the two parts (probe or card) and ordered both. I decided that the probe should be changed first rather than involve a circuit card. I changed the probe and tested the oven and it works again. Read more