Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix F2 error codes and inaccurate oven temperatures by replacing a faulty temperature sensor. Simple 15-minute DIY repair with basic tools.
My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out... Read more
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more
The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.
Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.
Symptoms of a faulty monitor switch include:
This genuine GE switch is also compatible with select Hotpoint and RCA models.
The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.
Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.
Symptoms of a bad fuse include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I read on line about other such ovens doing the same thing mine was doing, absolutely nothing! I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile. Read more
Oven won't heat or shuts off during baking? A faulty thermal fuse cuts power when detecting excessive heat. This safety device protects your range.
The F9 error code is supposed to indicate that the door lock mechanism has failed. My oven would give the F9 code and turn off during normal baking at 400 F after about 30-40 minutes. It turns out that GE must have programmed the error codes incorrectly in my model, because the real problem was that my control board cooling fan was no longer functional, and one of the two thermal switches was shutting off the unit when the control board area got too hot. AppliancePartsPros.com is one of the... Read more
Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.
Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more
The Guide Roller Assembly is an OEM part for GE microwaves. It supports the turntable as it rotates, ensuring even cooking by allowing the turntable to move smoothly and consistently. This assembly typically includes the rollers and the frame that houses them, fitting securely at the bottom of the microwave cavity.
Common causes of a bad guide roller assembly include normal wear and tear, exposure to heavy loads, or accidental impacts.
Symptoms of a bad guide roller assembly include:
Got a new roller assembly. Came sooner than expected. Fit perfectly. Happy ending. Read more
Broil element burned out or not heating? This upper oven heating element restores broiling function. Simple 15-minute DIY fix with basic tools.
Replaced broiler element with new one. We had difficulties in locating the correct element for my oven. Read more
Oven won't heat or shuts off after reaching temperature? The hi-limit thermal switch prevents overheating. DIY repair takes 30-60 minutes.
Replaced the hi-limit switch and oven control. Read more
Replacement inner glass window assembly for oven doors. Installs between door panels for clear visibility while cooking. Order when cracked, shattered, or broken.
Chatted on-line with one of the customer service representatives. He helped me select and order the correct part and also gave some basic instructions. Part arrived with several days of ordering. Read more
Halogen light bulb illuminates your oven interior. Replace when burned out or if flickering. Push-in style bulb for easy installation. Confirm fit with your model.
Called Appliance Parts Pros and they helped me. I could not find my Model # of the Oven However the mentioned to me if the bulb I ordered was not the part that they would refund my money Read more
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
This bimetal limit switch monitors a radiant surface element's temperature and opens the circuit if it overheats, helping your cooktop maintain safe, consistent heating while protecting wiring and controls from damage. What it does:
We initially called a repair company who immediately diagnosed the fan, without opening up anything. They quoted $550 to repair. $159 of that was the fan part. Plus they told me the parts come from overseas and will take 2 week to arrive. I researched the model number and can part and found exactly what I was looking for on your site. Plus there were diagrams and forum discussions that boosted my confidence on repairing ourself. Using your parts diagrams and our manual information, we pulled... Read more
Seals the oven door perimeter to retain heat and maintain consistent temperatures. Replace if frayed, damaged, or heat escapes. Confirm fit by model number.
First watched youtube instruction video. Ordered gasket. Delivered in 2 days. Removed old gasket and replaced with new in about 15 minutes. Wife happy. Read more
ST10-16 X 7/16"
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more
Hex washer head screw secures oven panels, brackets, and door handles. Replace missing, stripped, or damaged screws to eliminate looseness and rattling.
It was very easy!. Just removed the screws off the trim plate and access was right there. The double oven was given to me but the handles were missing and the end caps so I just had to replace them. Read more