Kelvinator Cogged Sump Filter Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: A00126401
Fix a dishwasher that won't drain or makes grinding noises. This drain pump assembly removes water after each cycle. DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Dishwasher was not draining Bryce K. • Ames , IA • March 16, 2015
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed.
Read more
More
$99.95
- Compare At:
-
$118.94
- You Save:
-
$18.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 154844301
Fix a dishwasher that won't spray water from arms or makes loud grinding noises. This circulation pump motor kit restores proper wash action. DIY: 1-2 hours.
Do-It-Yourself Stories from Customers like You
The dishwasher was going through all its cycles filling with water and discharging the soap dish would open but the soap was still in the tray just wet Joel C. • West Haven , CT • March 19, 2017
Replaced the pump motor. Works great again. I saw the picture of the part on the website so I knew I was getting the right part and watched the video to see if there were any shortcuts. Easy job.
Read more
More
$191.95
- Compare At:
-
$226.50
- You Save:
-
$34.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304532205
This base is the lower cabinet support that helps keep the appliance stable and holds internal components in their correct position. Replacing a damaged base restores proper fit, alignment and reduces cabinet movement. What it does:
- Provides structural support for the appliance cabinet and mounting points
- Keeps internal components aligned and maintains correct clearance
- Helps prevent rocking, vibration and gaps at the bottom of the cabinet
- Protects lower components from contact with floor-level debris or uneven surfaces
What's included: One base assembly Install notes:
- Disconnect power and, if applicable, water before beginning work
- Access may require removing the toe kick or lower access panels
- Keep track of mounting screws and brackets; use replacement hardware if original fasteners are corroded
Do-It-Yourself Stories from Customers like You
Filters in bottom were just so clogged with hard water deposits that they were not cleanable Mike F. • Maplewood , MO • March 07, 2016
Tried cleaning them with bristled brush but just wasn't cutting it. Replaced with new.
Hoping for cleaner dishes.
Read more
More
$18.78
- Compare At:
-
$19.75
- You Save:
-
$0.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 154252701
Prevents debris from clogging your dishwasher drain. Replace if parts won't lock in place, wobble during cycles, or show wear. Twists to lock securely.
Do-It-Yourself Stories from Customers like You
Three parts were melted on heat ring in the bottom of the dishwasher i failed to reinstall correctly after cleaning filters John K. • Sterling , VA • April 22, 2016
The fix took 30 seconds. The key to success was your video that explained how reinstalled parts "lock in".
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 154728201
Fix dishwasher leaks or poor drainage with a new sump assembly. This pump housing restores proper water circulation and stops leaks from cracks or clogs.
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 140281806020
Filters debris from dishwasher sump to protect pump and spray arms. Replace if warped, clogged, or dishes aren't cleaning properly. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Upper spray arm not getting dishes clean Scott G. • San Diego , CA • May 01, 2016
1. Removed and replaced circulation pump. That didn't end up being the whole problem, although there was debris jammed up in multiple sections of the impeller. Still was satisfied with results. 2. Continued trouble-shooting and discovered a lot of additional debris in the spray arm itself. Score! That resolved all performance issues. 3. In hind sight, I realized the strainer was warped and was allowing the debris to penetrate all of the critical areas. Ordered new strainer and it fit up flush...
Read more
More
$15.62
- Compare At:
-
$16.24
- You Save:
-
$0.62