Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Leg Parts

Best Seller
Range Burner Grate Bumper
Genuine Ge part
By: Ge
Part Number: WB02X24790

Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.

Do-It-Yourself Stories from Customers like You Burner bumpers missing   Ralph H. • Healdsburg , CA • June 11, 2017

Bought and installed bumpers Read more

More
$12.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Leveling Foot
Genuine Whirlpool part
By: Whirlpool
Part Number: 49621

The Dryer Leveling Foot is an OEM part for Whirlpool dryers. It is designed to support and stabilize the dryer by allowing adjustments to the height and leveling of the unit. Proper leveling ensures the dryer operates smoothly and efficiently, reducing vibrations and preventing unwanted movement during cycles.

Causes of a bad leveling foot can include wear and tear from regular use, damage from moving the dryer, or breakage due to heavy loads and stress. Over time, the threads on the leveling foot can wear out, or the foot itself can become cracked or deformed.

Symptoms of a bad leveling foot include:

  • Dryer rocking or wobbling during operation
  • Unusual noises or vibrations
  • Difficulty in adjusting the dryer's height
  • Visible damage or wear on the leveling foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Took the base off the washer and dryer and they had no feet on them.   Paula S. • Onalaska , WA • March 22, 2014

Bought the leveling feet and screwed them in the bottom and they work great. Read more

More
$6.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Grate Foot Pad Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 814323

Replacement foot pad kit for range grates. Installs underneath grate legs to cushion and stabilize. Replace when worn, cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You Lost one of the pads for the stove grates on our fridgadaire stove top   Roger S. • Broken Arrow , OK • December 24, 2016

Orders set of four pads. Came in the mail about three days later. Replaced lost pad and it fit perfectly. Read more

More
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Front Leveling Foot
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

  • The washing machine rocking or wobbling during operation
  • Increased vibration and noise
  • The washer being unlevel, affecting wash performance
  • Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle   Carl W. • Glendale , AZ • June 27, 2015

REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS... Read more

More
$6.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Burner Grate Insert
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761557CB

Replacement burner grate insert for gas range cooktops. Provides stable support for cookware over burners. Replace if cracked, broken, or dropped.

Do-It-Yourself Stories from Customers like You When cleaning the stove we dropped the cast iron grate and broke it   Michael M. • Great Neck , NY • August 14, 2014

Got online, checked with appliance parts pros and was assisted by email on the correct part for my unit. It came almost overnight!! Read more

More
$116.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cooktop Grate Foot
Genuine Ge part
By: Ge
Part Number: WB02T10461

Rubber foot that attaches to the bottom of cooktop grates. Replace if cracked, worn, missing, or loose to prevent grates from sliding and scratching.

Do-It-Yourself Stories from Customers like You One gas burner on ge cook top would not ignite with switch   Daryl O. • Sammamish , WA • December 01, 2015

I removed all the individual burners so I could lift the stainless cover to expose the igniter wires. I cleaned all the wire connections and the 4 good igniters and replaced the one bad igniter. Reassembly was easy and everything worked properly when done. Video of repair was helpful and all parts ordered were correct and shipped promptly and I will definitely use AppliancePartsPros again. Read more

More
$12.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Grate Foot Kit
Genuine Bosch part
By: Bosch
Part Number: 00413552

The Grate Foot Kit is an OEM part for Bosch ranges. This kit includes the small rubber feet that attach to the bottom of the range grates, providing stability and preventing the grates from scratching the range surface.

Over time, the grate feet can wear out or become damaged due to exposure to high temperatures, regular cleaning, or accidental impact. Missing or worn-out feet can cause the grates to sit unevenly or scratch the range surface.

Symptoms of a bad grate foot kit include:

  • The range grates sitting unevenly or wobbling
  • Scratches or damage on the range surface
  • Grates sliding or shifting during cooking
  • Missing or visibly worn-out rubber feet

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Was told 2 burners had no ignition or gas and 2 others had gas but wouldn't ignite   Charles W. • Granger , IN • December 16, 2014

Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were... Read more

More
$25.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Rear Caster Wheel
Genuine Samsung part
By: Samsung
Part Number: DA61-04703A

Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.

Do-It-Yourself Stories from Customers like You Broken rear wheel.   Todd C. • Austin , TX • October 08, 2018

I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more

More
$12.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Trash Compactor Roller Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 882688

Dual roller assembly for trash compactor drawer glide system. Replace when rollers are worn, cracked, or drawer slides hard. Installs on compactor base.

Do-It-Yourself Stories from Customers like You The drawer on my 24 year old compactor would no longer open freely have to pull it open with substantial force   Stephen M. • Roanoke , TX • June 17, 2015

Rood Cause #1: One of the front roller bearings was worn out and did not spin freely. Solution #1: I replaced the two front roller bearing assemblies (both included 2-pack). Rood Cause #2: The bottom surface of the compactor slide-out assembly had become deformed (convex) most likely due to the repeated force of compaction over the years. This bottom surface rubbed against the lower frame as evidenced by removal of paint (bare metal was exposed). Friction prevented the compactor drawer... Read more

More
$27.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Leveling Leg
Genuine Samsung part
By: Samsung
Part Number: DC61-01722B

Adjustable leveling leg installs on the bottom of your washer. Replace if broken, cracked, or snapped off. Allows height adjustment for stability.

Do-It-Yourself Stories from Customers like You Broken washer leg   Larry C. • Cape Girardeau , MO • October 05, 2016

Ordered a new leg from Appliance Parts & put it on. Read more

More
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Griddle Assembly
Genuine Ge part
By: Ge
Part Number: WB31K10217

Flat cooking surface that fits over range burners for pancakes, eggs, and sandwiches. Replace if cracked, warped, or missing from previous owners.

Do-It-Yourself Stories from Customers like You I needed a replacement griddle for my ge profile range   Nooshin T. • Orland Park , IL • January 18, 2016

Ordered the part on AppliancePartsPros.com - far less expensive than GE, and it arrived in two days. I will definitely use you again. Thank you. Read more

More
$232.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Stand Mixer Rubber Foot
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9709707

Rubber foot for stand mixers. Installs at the base to provide stability. Replace if worn, cracked, missing, or damaged to prevent mixer movement.

This part fixes the following symptoms
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You 20 +year maintenance   Michael L. • Santa Ana , CA • December 26, 2015

Checked out You tube video. Easy tune up. One gasket was damaged and I did not notice that the brush holders has no brushes. I believe a quick call to Appliance parts pros will fix this, besides I need a few more parts. I expect to get another 20+ years from this KitchenAide mixer, once repairs are competed. Watch out for the single lock washer located on the rear upper housing screw, you don't want to lose this! Read more

More
$8.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10141622

Adjustable leveling leg for refrigerators and freezers. Installs at base corner to stabilize appliance on uneven floors. Replace if broken or stripped.

Do-It-Yourself Stories from Customers like You New refrigerator not level; store couldn't figure out what was wrong.   Judith K. T. • Chico , CA • October 31, 2019

Purchased 2 replacement feet risers. A very awkward repait. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Rear Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: 285244

The Rear Leveling Leg is an OEM part for Whirlpool washing machines. It provides support and adjustment capability to compensate for uneven surfaces or flooring. By adjusting the height of the rear leveling leg, you can achieve a balanced and stable position for your appliance.

Causes of a faulty or damaged rear leveling leg can include regular use, accidental impact, or wear and tear. A damaged leveling leg can lead to an unstable appliance, increased vibrations, or difficulty in maintaining a level position.

Symptoms of a bad rear leveling leg may include:

  • Appliance wobbling or rocking during operation
  • Uneven distribution of weight
  • Difficulty in aligning the appliance with adjacent units or countertops

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Washing machine shook terribly   Edward L. • Temecula , CA • August 09, 2015

Replace front legs and rear legs took about 30 minutes. Made sure rear legs had lithium grease applied ran a load of wash very little Vibration nothing compared to before legs were installed and balanced the machine with a level. Read more

More
$25.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cooktop Grate Feet
Genuine Whirlpool part
By: Whirlpool
Part Number: W10185266

Rubber feet that attach to the bottom of cooktop grates. Replace when missing, worn, cracked, or damaged to restore stability and protect the cooktop surface.

Do-It-Yourself Stories from Customers like You A spark electrode was cracked; the ignition switches for some burners had failed; and rubber grate pads were destroyed or missing   Wayne K. • Redmond , WA • September 26, 2018

Of course, before disassembling anything, I unplugged and turned off the gas supply. To replace the spark electrode, I removed the drip pan/surface to gain access to the burner assemblies. Next, I unscrewed (with a 1/2" open-end wrench, I think) and disconnected the gas supply tubing from the burner assembly with the cracked electrode, and then unscrewed the assembly itself from the base surface. With the assembly detached, I flipped it over and removed the screw that secured the cracked... Read more

More
$11.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Pan Cover Wheel
Genuine Ge part
By: Ge
Part Number: WR01X10209

This small roller wheel attaches to the underside of the pan cover or drawer cover inside the refrigerator, allowing it to slide smoothly in and out. It supports the weight of the cover panel that sits above the crisper or deli drawers. Replace this wheel if your drawer cover is difficult to slide, sits unevenly, or if the original wheel is cracked or missing.

Do-It-Yourself Stories from Customers like You Several broken tray/drawer pieces needing replacement   David C. • San Diego , CA • January 11, 2018

Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more

More
$9.74

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google