Wui75x15hz Parts

The Thermistor is an OEM replacement part for Whirlpool ice makers. It is a temperature sensor that plays a crucial role in the proper functioning of the ice maker.

Symptoms of a need to replace the ice maker thermistor:

• Ice maker not producing any ice or producing insufficient quantities
• Ice cubes freezing incompletely or with an irregular shape
• Error codes or warning lights related to the ice maker or temperature sensing

Causes of a faulty ice maker thermistor can include physical damage, moisture exposure, or general wear and tear over time, affecting its ability to accurately measure and report temperatures.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fix a noisy or non-cooling refrigerator with this condenser fan motor. Solves overheating compressor issues. DIY-friendly repair with video guide.

Reduces chlorine, contaminants, and odors from your refrigerator's water and ice. Replace every 6 months for optimal performance. Confirm fit by model.

The Pump is an OEM part for Whirlpool standalone ice makers. This pump is responsible for circulating water to the ice maker, ensuring a steady flow of water necessary for ice production. It plays a crucial role in maintaining the efficiency and functionality of the ice-making process.

Causes of a bad ice maker pump can include wear and tear over time, clogging from mineral deposits or debris, and damage from electrical surges or water leaks. These issues can disrupt water flow to the ice maker, leading to reduced or halted ice production.

Symptoms of a bad ice maker pump include:

• No ice production or insufficient ice output
• Unusual noises coming from the pump area
• Water leaks around the ice maker
• The ice maker not filling with water properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Ice maker producing whole slabs instead of cubes? A broken cutter grid prevents proper ice separation. This wire grid slices frozen ice into uniform cubes.

This is a water inlet valve with quick-connect fittings that controls the flow of water into a standalone ice machine. It opens electrically to allow water to fill the ice mold and closes once the correct amount of water has been delivered. Replace this valve if the ice maker is not filling with water, produces undersized or misshapen ice, or if water is leaking from the valve area.

Fix water not draining or pooling issues in your ice maker with this drain pump. Common when ice is cloudy, small, or machine won't cycle. 1-hour DIY repair.

Ice maker not making ice or overfilling? This control board regulates water fill cycles and ice production. Moderately difficult repair with basic tools.

Mounts in the base to collect incidental water and protect internal components. Replace if cracked, warped, or causing puddles beneath the unit.

This start relay (EMB) energizes the compressor's start winding so the refrigerator can begin cooling reliably. Replacing a weak relay can resolve hard-start clicking and restore consistent operation when the compressor struggles to start.

• Delivers initial power to the compressor's start winding, then disengages once the motor is up to speed
• Supports reliable compressor starts and reduces repeated start attempts
• Common symptoms: clicking from the compressor area, rising refrigerator/freezer temperatures, compressor starts then stops after a few seconds, or heat damage on the old relay
• Works with EMB-style compressor connections used on select units

• Disconnect power to the appliance before servicing
• Remove the rear access cover; note wire positions; pull the old relay straight off the compressor terminals
• Seat the new relay fully on the compressor pins; reconnect the harness and any run capacitor lead exactly as removed
• Reinstall the cover and restore power; use caution—capacitors may retain a charge

Replace your ice maker's water distribution tube if cracked, broken, or kinked. Routes water between internal components to restore proper flow.

The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly. 

Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption. 

Symptoms of a bad screw include:

• The refrigerator door seems misaligned or does not close properly.
• Increased effort needed to open or close the door.
• Unusual gaps around the door seal when closed.
• The door might squeak or make other noises during operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replace your ice maker's water tube to restore proper flow and eliminate leaks. Install when cracked, kinked, or brittle. Confirm fit with your model number.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Seals the drain port to contain water and prevent leaks. Replace if cracked, stripped, or missing to maintain proper drainage. Confirm fit with model.

Black handle for ice maker compartment door. Installs on front panel to provide grip for opening and closing. Replace if cracked, broken, or missing.