Gr448lxpb Parts

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

• Oven is too hot
• Little to no heat when baking
• Won't start
• Oven not heating evenly

When bake was set, the stove would function normally, it would show pre-heating then get up to temperature and beep twice like normal when it reached the set temperature. Shortly after it would start beeping and scroll “ fault detected, press start to try again” across the display. Pressing start did not resolve, the message would continue to post and the pizza inside was burnt. We noticed the broil element was glowing. This model stove does use the broil element for backing but it... Read more

• Element will not heat

Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,... Read more

Took the stove apart*, saw where the mouse had made a nest. It was kind of like a hotel room after a rock star had used it. It was nasty, is what I'm saying. I removed the insulation, which immediately went into a garbage bag and was placed outside, whereupon I took off and nuked the site from orbit. It was the only way to be sure (actually it was disposed of in the proper manner, no nukes were detonated in the course of this repair). Anyway, I ordered the insulation from this site, which was... Read more

Replaced the blown heating element. I also only to be on the safe side, replaced the over temp sensor. I checked it with the meter when I pulled it out and it was ok. Tested ok. Thank you very much for the less than 2 day delivery on the part. Read more

I bought an( as is) range (Maytag) form a dealer. I assumed that it would have racks, however, it came without. I tried to find some racks that would fit but none available. So I decided to order from Appliance Pros and received the right racks two days after I ordered. Very Happy Camper, Read more

I watched your video, knew that it would be a simple repair, ordered it, and did exactly what was shown in the video. It was crazy easy! 2 minutes start to finish! Easiest repair I've ever done. Read more

• Element will not heat

Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element Read more

Touch up paint Read more

• Won't start

I was going to just throw my stove out and get a new one until I did some research. I stumbled onto this site and found my broken part watched a quick video thanks to this wonderful site, they convinced me I could do it. I ordered the part on a Saturday night and Tuesday I got my part I was shocked. Took 5 minutes to fix and this site saved me hundreds of dollars on buying a new stove. Would buy again from this site in a heart beat. Thanks appliance parts pros! Read more

Replaced It With New One Read more

• Element will not heat
• Won't start

Turned off power supply. Removed two screws (near the oven door) holding the ceramic top. Slid the top forward, disengaged the two power supply cables, and removed one ground wire. Removed range top, and put on a flat surface. Unclamped two power supply wires, one ground wire and one thermocouple wire from the element. Unscrewed the bracket from the element, and remove the element from the range top. Remove the two clamps from the old element, and put them on the new element at the same... Read more

I used the oven model number to find the replacement parts online and Appliance Parts Pros had the parts I needed at the lowest cost compared to other online retailers. This repair only required a screwdriver, but it took time to figure out where everything belonged since the oven instruction manual was not very informative for a do-it-yourself fix. Read more

I used the oven model number to find the replacement parts online and Appliance Parts Pros had the parts I needed at the lowest cost compared to other online retailers. This repair only required a screwdriver, but it took time to figure out where everything belonged since the oven instruction manual was not very informative for a do-it-yourself fix. Read more

I did a search online for inner door glass replacement pieces and came across a youtube video made by appliance parts pros. After watching the video, I was certain that this was a repair I could do myself. I ordered the glass and it arrived the next afternoon. That evening, I brought the video up on my computer, gathered a screwdriver, some gloves and a towel to lay the door on when I put it on the table. I watched the video as I did the repair, starting, stopping and backing up as needed. ... Read more

I ordered a new socket and replaced the socket and now we have a light in the oven. The project took about 10 minutes and was easy done. Read more