Yard-Main Snowblower Traction Control Cable Parts
Genuine Ge part
By: Ge
Part Number: WD21X31902C
The User Interface Control Board is an OEM part for GE dishwashers. It is responsible for controlling and managing the settings and functions of the dishwasher. It allows users to select different wash cycles, adjust settings, and monitor the progress of the dishwasher.
A bad User Interface Control Board can occur due to electrical malfunctions, damage caused by power surges, or wear and tear over time. If the control board becomes unresponsive, displays error codes, or fails to operate the dishwasher properly, it may be time to replace the User Interface Control Board.
Symptoms of a bad User Interface Control Board include:
- Unresponsive buttons or touchpad.
- Error codes displayed on the control panel.
- Inability to select or change wash cycles.
- Display screen not functioning properly.
If you're experiencing any of these issues, it's time to replace the User Interface Control Board with this genuine GE part. Regain full control over your dishwasher's settings and ensure an efficient cleaning. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
GE dishwasher wouldn't start or show lights on the control panel. Seth M. • Portland , OR • December 18, 2022
I started with Google searches for the problem, using the dishwasher model number to narrow down the number of results. When I found several posts in the forum on AppliancePartsPros.com from other people having the same problem with the same dishwasher, as well as solutions that involved replacing the control board, I decided to start with that.
The repair was very easy, especially with the help of clear and well-paced videos showing exactly what to do and what to look for. I was able to...
Read more
More
$175.34
- Compare At:
-
$193.61
- You Save:
-
$18.27
Genuine Ge part
By: Ge
Part Number: WD21X24901C
The Service Machine Control is an OEM component specifically designed for GE dishwashers. As the main control board, it regulates all wash cycles including temperature, filtration, spray arm rotation, drying functions and end of cycle signals.
Causes of a faulty service machine control include normal wear and tear over time. Electronic failures or water exposure from plumbing issues can also trigger malfunctions.
Symptoms of a failing control board are:
- Inability to progress through cycles fully
- Flashing error codes during washes
- Inconsistent wash and rinse performance
- Component damage from power overload issues
Replacing it with this genuine GE OEM part restores optimal cycle handling. Proper controls are essential for sanitizing every wash. The part is also compatible with Hotpoint, RCA and some Kenmore models.
Do-It-Yourself Stories from Customers like You
815 error code dishwasher thinks door is ajar. Cesar G. • Chicago , IL • July 24, 2020
Indicator light would blink three times, make a sound, but the dishwasher would not run. After making sure there were no obstructions, no problems with seals, filters, and latch clean, I cut the power off and back on. The Dishwasher worked for a few more times. After that, cutting the power off and on no longer worked. I figured out what buttons to press and hold to find the error code (start/stop and cycle select), saw code 815, and then did a "hard reset" by pressing and holding other...
Read more
More
$158.70
- Compare At:
-
$174.57
- You Save:
-
$15.87
Genuine Ge part
By: Ge
Part Number: WR30X10093
The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.
Symptoms of a faulty electromechanical kit include:
- Ice not being produced or dispensing properly
- The ice maker failing to turn on or stop automatically
- Strange noises emanating from the ice maker
Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.
This part fixes the following symptoms
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
No ice and leaking water Jeff P. • Pinecrest , FL • November 01, 2019
Much easier than expected, I was certain it had to be a water line but the solved everything
Read more
More
$182.78
- Compare At:
-
$215.68
- You Save:
-
$32.90
Genuine Ge part
By: Ge
Part Number: WD21X24900C
The Main Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit for your dishwasher, responsible for coordinating and regulating various functions and cycles. It controls functions such as water temperature, cycle duration, and detergent dispensing.
A bad Main Control Board can result in a range of issues, including cycle irregularities, error codes, or a complete failure of the dishwasher to function. Causes of a bad Main Control Board can include electrical failures, power surges, or damage due to moisture.
Symptoms of a bad Main Control Board include:
- Inconsistent or erratic cycle behavior
- Error codes or error messages displayed on the control panel
- Inability to start or complete a cycle
- Unresponsive control panel buttons
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Three beeps when trying to start dishwasher Aaron F. • Chapel Hill , NC • April 10, 2020
Two weeks ago, my dishwasher would not run. It would beep three times when you pushed the start button: the same signal it gives when the door is open. I used the troubleshooting steps I found at applianceblog.com to do a hard reset. (Hold START and WASH TEMP for five seconds, close the door, and wait 3 minutes) After that, it worked for about one week. When it started having the same issue again, the hard reset did not work. I lowered the control board and could see that there were no lights....
Read more
More
$156.90
- Compare At:
-
$172.59
- You Save:
-
$15.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185982
The Dryer Timer is an OEM replacement part for Whirlpool dryers. It is a critical component that controls the timing and sequence of the various drying cycles, ensuring the machine operates correctly and efficiently.
Causes of needing to replace the dryer timer can include general wear and tear over time, electrical malfunctions, damage from power surges or voltage fluctuations, or moisture or water exposure within the timer itself.
Symptoms of a bad dryer timer include:
- The dryer failing to advance through the complete cycle or getting stuck in one part of the cycle
- Cycles running for an incorrect duration (too short or too long)
- The dryer failing to heat, tumble, or stop at the appropriate times
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad dryer timer Darlene T. • Fayetteville , AR • August 22, 2014
After calling Whirlpool customer support learned that a replacement timer would be $136. The CSR gave me the part number needed. Online I found AppliacePartsPros. I called and got a very personable CSR who took my order. I was assured the part was a genuine, new--not rebuilt--timer. My order was placed in minutes. Although I ordered standard shipping and my part arrived in 2 days!! Unfortunately Whirlpool had given me the wrong part number so I contacted AppliancePartsPros and reordered...
Read more
More
$100.41
- Compare At:
-
$120.49
- You Save:
-
$20.08
Genuine Whirlpool part
By: Whirlpool
Part Number: 8194001
The Door Balance Link Kit is an OEM replacement part for Whirlpool dishwashers. This kit includes the necessary components to ensure proper balancing and operation of the dishwasher door.
Causes of needing to replace the door balance link kit include wear and tear over time, damage due to mishandling or impact, or issues with the door hinges or springs.
Symptoms that may indicate the need for a new door balance link kit include:
- The dishwasher door feeling loose or unstable
- Difficulty in opening or closing the door smoothly
- The door failing to stay in the desired position when opened
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.
This part fixes the following symptoms
-
Noisy
-
Door won't close
-
Door latch failure
See more...
Do-It-Yourself Stories from Customers like You
The door would free fall to the floor left door balance broken Daniel M. • San Diego , CA • December 23, 2016
I finally decided to repair my dishwasher because the door would free fall to the floor possibly breaking the hinges. Also the top shelf was rolling out on its own every time the door was opened. I first pulled the dishwasher out of the enclosure and found that the drain hose was directly under the pump area throwing the unit completely out of level. Also the inadequate plastic and rope counterbalance on the left side was completely broken where the rope was attached to the plastic piece to the...
Read more
More
$27.95
- Compare At:
-
$33.26
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10503278
The Electronic Control Board is an OEM replacement part for Whirlpool refrigerators. This Electronic (JAZZ) Control Board manages various functions of your refrigerator, ensuring proper temperature control and operation. After installation, the board will need to be programmed. An instruction sheet is included.
Causes of a bad Electronic Control Board can include electrical surges, which can damage components on the board, age-related wear and tear affecting its functionality, and exposure to moisture or extreme temperature fluctuations. These factors can lead to a malfunctioning fridge with erratic behaviors.
Symptoms of a bad Electronic Control Board include:
- The refrigerator not cooling properly
- Irregular defrost cycles leading to frost buildup or thawing issues
- Unresponsive controls or display issues
- The ice maker or water dispenser not working as expected
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Fridge runs too long
-
Freezer not defrosting
-
Freezer too cold
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Amana bottom freezer refrigerator has cold freezer warm refrigerator Albert I. • Rio Rancho , NM • June 23, 2014
A bit of research on the internet indicated the most likely problem was with the defrost system. I found the service manual for the refrigerator and was able to determine that the defrost heater and thermostat passed the self test. The refrigerator would perform a forced defrost which resulted in a cold refrigerator. More research revealed that this particular refrigerator does not have a defrost timer, instead the defrost cycle is controlled via the Electronic Control board which is also...
Read more
More
$153.95
- Compare At:
-
$183.20
- You Save:
-
$29.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198202
The Cold Control is an OEM part for Whirlpool refrigerators, acting as a thermostat that regulates the temperature inside the fridge and freezer compartments. It's a critical component that ensures your refrigerator maintains the desired temperature to keep your food fresh and safe.
Causes of a bad Cold Control may include electrical malfunctions within the control unit, which can prevent accurate temperature sensing. Wear and tear from continuous use may lead to a degradation of the control's responsiveness.
Symptoms of a bad Cold Control include:
- The refrigerator or freezer is too warm or too cold
- Frequent or continuous running of the refrigerator's compressor
- Inability to start the cooling system
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Fridge too cold
-
Fridge runs too long
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
The whirlpool side by side needed upgrade of control components William M. • Sunnyside , WA • February 06, 2017
The 20 year old unit still serves us well, looks good and has been kept in good repair. The condenser fan had stopped so I removed, cleaned and oiled that motor. The decision was made to make an upgrade to the evaporator motor and control units so that the appliance could reasonably be expected to have extended service life. The Ice maker module had been replaced 7 years ago. I ordered the parts and have made the upgrade for temperature controller and the defrost control. If you are in a...
Read more
More
$62.50
- Compare At:
-
$83.40
- You Save:
-
$20.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 215846602
The Defrost Timer is an OEM part for Frigidaire refrigerators. It is an essential electronic component that controls the automated defrost cycle of the refrigerator. The defrost timer monitors run times and temperatures to determine when to initiate the defrost process. It allows the refrigerator to operate efficiently by preventing excessive ice buildup. This defrost timer is designed to run for 30 minutes every 8 hours.
Symptoms of a bad defrost timer include:
- Inability to initiate or maintain the defrost cycle
- Excessive ice buildup in the freezer compartment
- Erratic temperature fluctuations
- The refrigerator running excessively or displaying other performance issues
Causes of a bad defrost timer can be normal wear and tear over time. Environmental factors like power surges or fluctuations may also impact the electronic timer functionality.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Frost buildup
-
Fridge runs too long
-
Freezer too cold
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Not cooling properly eventually evaporator fan failure Richard D. • Wood Ridge , NJ • April 25, 2016
My problem first showed up as varying temperature in both sections of my old mid 1970’s Frigidaire model FPCI-170T-7 refrigerator, which is not listed on most appliance repair databases.
Running on the warm side from time to time, as well as sudden fan noise (probably the fan blade hitting ice build-up on the evaporator coil) alerted me to a possible defrost system problem, since the compressor was cooling. The evaporator fan eventually failed after a day or so, and a major repair was...
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Ge part
By: Ge
Part Number: WB27X45466
The Control Oven TO9 is an OEM part for GE ranges. This part manages the oven's various functions, including temperature regulation, cooking modes, and timer settings. It serves as the central interface for the user to control the oven's operations, ensuring precise and reliable cooking performance.
Causes of a bad control module can include electrical surges, general wear and tear, or physical damage from impacts or spills.
Symptoms of a bad control oven module include:
- Unresponsive or malfunctioning buttons and dials
- Incorrect temperature readings or inconsistent heating
- Display not functioning properly
- Oven not turning on or shutting off unexpectedly
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven control board failed to work after oven light shorted Glenn S. • Fairfax , VA • October 28, 2014
Replaced control board myself. Easy.
Read more
More
$133.21
- Compare At:
-
$158.52
- You Save:
-
$25.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9706648
Includes black knob
The Speed Control Assembly is an OEM part for Whirlpool mixers, integral to managing the mixing speed to accommodate various ingredients and recipes efficiently. This assembly is crucial for the precise control over the mixer's speed, ensuring that your mixing tasks are performed with the desired consistency and texture.
Common causes of a faulty Speed Control Assembly can vary, such as electrical problems resulting in erratic mixer speeds, wear and tear from regular usage, physical damage to the control assembly, or faulty wiring and connections within the mixer.
Symptoms of a bad Speed Control Assembly include:
- The mixer operates at one speed regardless of the setting
- Inability to adjust the mixer's speed
- The mixer fails to start or exhibits intermittent stopping during use
- Unusual noises or behavior when changing speeds
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The control assembly on my kitchenaid mixer became intermittent J H T. • Liberty , TX • March 17, 2014
The fix was very easy. Control assembly is easy to access by removing 5 phillips screws. Unplug the wiring from the old assembly being careful to note which wire goes to which connector. Install the new assembly and connect the wiring.
Read more
More
$82.64
- Compare At:
-
$99.17
- You Save:
-
$16.53
Genuine Ge part
By: Ge
Part Number: WD21X32165
The Configured Service Machine Control Board is an OEM component designed specifically for GE dishwashers. It serves as the central processor that monitors all cycle phases including wash, rinse, dry, and sanitization. Precise controls are paramount for thorough cleaning performance.
The causes of a board needing replacement can relate to water exposure compromising electrical circuits over time. Regular operational wear may also induce failures.
Symptoms of a faulty control board involve:
- Inoperable or interrupted wash cycles
- Inaccurate temperature or unclear error codes
- Component damage from electrical overloads
- Signal issues preventing desired settings
The configured service machine control board is compatible with Hotpoint, RCA, and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Dead dishwasher Arthur H. • Kingwood , TX • June 26, 2023
My GE dishwasher (GDT605PMM0ES) had started going in and out of service but if I unplugged it and plugged it back in it would work a few more times. Then one day that old trick didn't work anymore. Looked at what might be the issue on the internet and most signs pointed to the configured service machine control board or the configured Ui board. I ordered both, not really which was bad, but started with the Ui board first because the service machine control board showed it was receiving...
Read more
More
$90.95
- Compare At:
-
$108.23
- You Save:
-
$17.28
Genuine Ge part
By: Ge
Part Number: WE04X24550
The Timer is an OEM part for GE dryers. It's a component that controls the duration of the drying cycles, ensuring clothes are dried efficiently and not overexposed to heat, which can cause damage. The timer regulates the start, duration, and end of each cycle, playing a pivotal role in the operation of the dryer.
Causes of a malfunctioning timer can include wear and tear from regular use, electrical failures that impede the timer's movement, and physical damage to the timer knob or internal components.
Symptoms of a bad Timer include:
- The dryer doesn't start or complete a cycle
- Cycles run longer or shorter than programmed
- The timer knob does not advance or is stuck
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Knob broke off and the piece that rotated for the timer Kristi W. • Waxahachie , TX • August 25, 2019
Ordered a new timer and knob. The husband was able to fix in about 20 minutes and now works like new.
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822278
The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils.
Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.
Symptoms of a bad Defrost Timer include:
- Excessive frost buildup in the freezer compartment
- The refrigerator or freezer not maintaining the set temperatures
- Unusual noises coming from the appliance
- The appliance running continuously without cycling off
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Fridge runs too long
-
Fridge too cold
-
Frost buildup
See more...
Do-It-Yourself Stories from Customers like You
Defrost not working on upright 20 year old freezer W D D. • Spring , TX • September 19, 2014
A word of thanks to AppliancePartsPros - they delivered in one day. Ordered at 4PM CDT and received the part by noon the next day. Also, Alicia in the help department was able to locate an electrical diagram for my old freezer. This was essential for proper setup and her persistence in tracking down the diagram was top notch. Now on to my problem. One day I opened the freezer and found frost and thawing food. I attributed this to the door hitting an item in the freezer and not completely...
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Ge part
By: Ge
Part Number: WH22X38441C
This main control board is the washer's central electronic brain, coordinating cycles, motor and valve operation, and safety checks. Replacing a failed board can restore normal starts, fills, agitation/spin, and reliable cycle completion.
- Manages cycle timing and power to the drive motor, drain pump, and water inlet valves
- Monitors inputs from the lid lock and other sensors for safe, accurate operation
- Interfaces with the user controls to run the selected wash program
- Typical failure symptoms: won't start or power up; no fill/agitate/spin/drain; stops mid-cycle; error codes or unresponsive controls
What's included: 1 main control board assembly Install notes:
- Disconnect power before servicing and handle the board with ESD protection
- Access the control at the top/rear area, transfer connectors one at a time to the same positions, and secure the board in the original mounting
- After installation, restore power and run the unit's diagnostic/service mode to verify operation; some models may require a configuration/personality step per the tech sheet
Do-It-Yourself Stories from Customers like You
Wouldn't allow "super" fill setting James L. • San Jose , CA • April 02, 2021
GE Washer m/n GTW460ASJ6WW would allow other fill levels, but when set to "super" it would never stop filling. Checked water inlet valve (by initiating a fill and unplugging the unit) to see if the inlet valve was sticking open, that was not the issue. Decided to replace the board even though it is a significant fraction of the cost of a new washer. Local appliance stores didn't have the board but APP did, and of course, they are open 24/7 while my local part stores have decided the weekend is...
Read more
More
$191.86
- Compare At:
-
$211.05
- You Save:
-
$19.19
Genuine Lg part
By: Lg
Part Number: AGM73610701
The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.
Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.
Symptoms of a bad Magnetic Door Plunger include:
- The washing machine door not staying closed during cycles.
- The machine failing to start due to a door sensor not detecting closure.
- Random pausing of the machine during operation if the door unlatches.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken tab on old magnet holder Joel E. • Granite Falls , NC • December 27, 2016
This was a super-easy repair. You have to line up the spring so that it sits on the bumps inside the magnet holder and the door, then you have to line up the tabs on the magnet holder so they will slide into the slots on the door. Then you just push it in. Repair took less than a minute.
Read more
More
$17.75
- Compare At:
-
$21.12
- You Save:
-
$3.37