Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix F10 error codes or inaccurate oven temperatures with a new sensor probe. Common fix for ovens that overheat or won't reach set temp. Easy DIY repair.
After I came from from work, my wife told me about the problem. I quickly began to research the code F10 which according to the paper in the pouch behind my range said it needed a new temperature control sensor and that should fix it. It also said that if that doesn't fix the problem that I'd have to replace the circuit board which probably got fried due to the runaway temperature. So, I decided to just order the temperature sensor part# AP3963654 for $25.63 plus shipping. I ordered the part at... Read more
Burner stuck on high or won't heat? This surface element switch controls temperature for electric range burners. DIY repair in under 30 minutes.
Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros. Read more
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more
The Dual Element is an OEM replacement part for Frigidaire electric ranges. This component is located on the cooktop surface and features two heating coils in one unit, one measuring 6 inches in diameter and the other 9 inches. It allows for precise control of cooking temperatures, accommodating various pot and pan sizes for more efficient cooking.
Causes of a bad dual element can include prolonged use that leads to wear and tear, electrical surges that can damage the heating element, or physical damage due to impact or mishandling. Over time, these issues can result in the element failing to heat properly or not working at all.
Symptoms of a bad dual element include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
We are very inexperienced appliance repair people. Thus check it out first to see if we can fixit...successs. First checked to be sure it wasn't the actual switch. Did this by numbering the wires and then switching the two switches b/w the right and left front dual burners. Success, the switch was fine but kinda disappointed cause this part was less expensive. Proceeded to then order the left front dual burner. Arrived in a few days, packed well. We unplugged the appliance, as it been a... Read more
Burner won't turn off or stuck on high heat? This surface element control switch restores proper temperature control. Easy DIY repair in under an hour.
Replaced burner switch and all was working properly. Great customer service and part replacement. Read more
Burner not heating? This 6-inch surface heating element restores cooktop function. DIY repair in 10-30 minutes with basic tools and simple instructions.
Very easy. go online learn how to change the element step by step. order the part and you are all set. I saved $99 of labor cost. Read more
Oven rack for electric and gas ranges. Provides a cooking surface inside the oven cavity. Replace if discolored, warped, rusted, or damaged.
Ordered new racks Read more
Fix F10, F11, or F12 error codes, oven temperature issues, or non-heating elements with this range control board. DIY repair in about 30 minutes.
I ordered a new kit and replaced it. It was easy except the video on the website did not include how to get off the front sticker. However, I did find another video to help Read more
Replacement overlay for range touch pad control panel. Installs over the control board buttons. Replace if cracked, peeling, worn, or labels are faded or illegible.
Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I... Read more
Signals when your range burners or oven are active. Replace when light fails to illuminate or stays on constantly. Confirm fit with your model number.
The repair was a success. The switch and came looked different from the original. I called Appliance Parts Pro, they lady on the phone said that Frigidaire changed the switch and how to wire it up correctly. Problem solved. It all works as it should. Read more
Fix sparks, tripped breakers, or burnt connections at your range's power cord junction. Terminal block replacement takes about 5-10 minutes with basic tools.
I unplugged the stove ,cut the 50 amp cord off from the terminal block as it was burned took out the terminal block as it to was all melted .installed the new terminal block with a new stove cord back in business Read more
Broil element not heating or burned out? This top heating element restores high-heat broiling for browning and crisping. DIY-friendly, 15-30 minute repair.
I replaced the element. I went on your site to order a new element, and had trouble locating the exact replacement. A young man named Kenneth came on live chat and assisted me. He found the correct one and assisted me with the order. It was all very smooth and quick. I received the part in two days ! Read more
Rear glide attaches to the back of your range storage drawer, allowing smooth sliding motion. Replace if broken, cracked, or missing to prevent drawer tilt.
The clips on the rear side of the drawer box were broken. Easy to locate the part on the website. Part in hand in two days and installed in about five minutes. Needed to remove the drawer and use a 1/4" driver, remove the broken slide and install the new one. Read more
Indicator light lens covers and protects the burner signal light on your range. Replace when cracked, discolored, or missing. Confirm fit with your model.
The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer. Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers. Symptoms of a bad freezer lens include:
I purchased the lens cover from your on-line store. It came within the week. I was able to change the lens cover without any problems. My husband takes care of things like this for me at home, but this cover was for my mother's oven. I broke the one she had when I was cleaning her oven and changing the bulb. Read more
Supports smooth drawer movement in your range's storage compartment. Replace when drawer becomes crooked, slides too far, or glide shows wear grooves.
The bottom drawer glides tend to wear. The metal drawer sliding against the plastic glide creates a groove. After only a couple years, the groove was so large that the drawer slid in too far. It was no longer flush with the oven door. Then the left side was crooked!!! All it took was a screw driver to install these new glides. Read more