Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more
The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.
Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.
Symptoms of a faulty monitor switch include:
This genuine GE switch is also compatible with select Hotpoint and RCA models.
The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.
Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.
Symptoms of a bad fuse include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I read on line about other such ovens doing the same thing mine was doing, absolutely nothing! I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile. Read more
The Halogen Light Bulb is an OEM part for GE microwaves and ovens. It provides interior lighting, allowing you to clearly see the contents inside the appliance during operation. This illumination is essential for monitoring cooking progress and ensuring safety.
You should replace the halogen light bulb if it burns out or becomes damaged. Causes of a bad halogen light bulb can include regular use over time, electrical surges, or physical impact that can cause the bulb to break.
Symptoms of a bad halogen light bulb include:
Removed light cover. oven was above range type and light assbly is at rear bottom of unit. access and visibility of bulb sockets a bit difficult, Usen hand hell mirror to assist . Bulb extraction and insertion a snap. Read more
The Turntable Motor is an OEM part for GE microwaves, designed to rotate the glass plate or turntable inside the microwave cavity. This rotation ensures the food is cooked evenly by exposing all parts of the food to the microwave energy.
The causes for these issues often stem from wear and tear over time, especially with frequent use. Other factors can include damage from food particles or spills that seep into the motor area or mechanical failure within the motor itself.
Symptoms of a failing Turntable Motor include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models
I fix this problem by purchasing a new turntable motor. Simple 5 minute installation. Read more
The High Voltage Diode is an OEM part for GE microwaves. This high-voltage diode is crucial for converting alternating current (AC) to direct current (DC), enabling the magnetron to generate the microwave energy needed for cooking. Measuring approximately 3-1/2" in length, this diode features a banded side with a #8 ring terminal and a non-banded side with a 1/4" female quick connect.
You should replace the diode-H.V assembly if it becomes faulty due to electrical issues, wear and tear, or physical damage. Continuous exposure to high voltage can cause the diode to deteriorate over time, leading to malfunction.
Symptoms of a bad diode-H.V assembly include:
Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more
The Halogen Light Bulb is an OEM part for GE microwaves. It provides bright interior lighting, allowing you to monitor food while it's cooking and to see clearly when opening the microwave door.
You should replace the halogen light bulb if it burns out or becomes damaged. Halogen bulbs can wear out over time or may break due to impacts or electrical surges.
Followed the instructions found on the web, and replaced the part. Super-easy. Read more
The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards. Symptoms of a bad Lower Lever Switch include:
Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new switches (replaced all three- upper and lower door switches and switch monitor- just to make everything new). Received them within 48 hours! You tube video enabled replacement job to be completed by handyman neighbor in 20 minutes (would have been shorter repair time but for my kibitzing). Appliance Parts Pros gets an A+! Will do business with APP on any future appliance repairs! Read more
The Grease Filter is an OEM part for GE microwaves. It is responsible for trapping grease and other particles from the air as it circulates through the microwave's ventilation system.
You should replace this grease filter if it becomes clogged, damaged, or worn out. Causes of a bad grease filter include prolonged use without cleaning, accumulation of grease and food particles, or physical damage to the filter mesh.
Symptoms of a bad grease filter include:
Took out the old ones and inserted the new ones, extremely easy Read more
The Cooking Tray is an OEM part for GE microwaves. This glass tray rotates to ensure even cooking and heating of food. It is designed to fit perfectly in the microwave, providing a stable platform for cookware and dishes.
Over time, the cooking tray can become damaged or worn out due to regular use, accidental drops, or exposure to extreme heat. Replacing a damaged cooking tray is essential to maintaining the microwave’s functionality and ensuring food is heated evenly.
Symptoms of a bad cooking tray include:
And continued to crack more with each use. Ordered a new on. Quick chat online with a rep to make sure I had correct part, ordered and it got here 2 days later. Fantastic!! Read more
This thermostat is a temperature-sensing safety switch used in microwave ovens. It monitors heat and opens the circuit during an over-temperature condition to protect internal components and help prevent damage. What it does:
Replaced the thermostat and it turned on and I have power again. Read more
The Capacitor is an OEM part for GE microwaves. This component stores and releases electrical energy to help power the microwave's high-voltage circuits, essential for the proper functioning of the appliance.
Over time, capacitors can fail due to electrical surges, overheating, or degradation of the internal components. When a capacitor goes bad, it can affect the microwave's ability to generate heat and operate efficiently.
Symptoms of a bad Capacitor include:
Turntable glass tray. Color: clear. Size. 11-1/2 inches diameter.
Found replacement on AppliancePartsPros.com. Placed order online and tray was delivered 2 days later. Just like new! Read more
This is a turntable motor intended for use with microwave ovens. A turntable motor is required to rotate the turntable so that food is heated evenly. With time, because of misuse, or as a result of accidental damage, the turntable motor may malfunction or fail. To continue using the appliance efficiently, the turntable motor must be replaced.The primary indication that there is something wrong with the turntable motor is a tray that doesn't spin. When replacing the turntable motor, it is essential to disconnect the machine from the power source. Wear gloves for safety. The part can be replaced easily by removing screws from the back and side of the microwave, which allows the panel to swing open. Take the wires of the old motor and reconnect them to the new one.This turntable motor is an authentic OEM replacement part. It is sold as an individual unit. The turntable motor is made of high-quality, durable materials. The component comes sourced directly from the manufacturer. The replacement part can be installed in several models of microwaves. It is compatible with appliances produced by General Electric, RCA, and Hotpoint brand appliances.
Unplug your microwave. Took the screws off of the bottom of the unit with it still on the cabinet. The whole bottom panel swung down to expose the turntable motor. I took the power cable loose (just pull it off). It was one screw to take the motor out. Word to the wise: DON'T try to take the plastic coupler off before the motor. Their is a tab that holds it in while the motor is in place. If you pry it up you will break it, trust me. ;) Turn the motor out of its housing and it come right out.... Read more
The Magnetron is an OEM part for GE microwaves. It is the component responsible for generating the microwave energy that cooks food. The magnetron converts electrical energy into microwave radiation, which heats and cooks the food evenly.
Over time, the magnetron can fail due to wear and tear, electrical issues, or overheating. Causes of a bad magnetron include electrical surges, prolonged usage without proper cooling, or physical damage from impacts or mishandling.
Symptoms of a bad magnetron include:
The Hood Damper Assembly is an OEM part for GE microwave ovens. This part controls the flow of exhaust air to minimize odors and smoke from cooking. This damper opens to allow air to vent outside during microwave operation and closes to prevent outside air from entering when the microwave is not in use.
Causes of a bad hood damper assembly can include mechanical failure such as a stuck or broken damper, deterioration of the linkage or springs that operate the damper, and blockage caused by grease or debris accumulation, which can impair its functionality.
Symptoms of a bad Hood Damper Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a... Read more