Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.
Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.
Symptoms of a bad Temperature Sensor include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more
The Fan Motor Grommet is an OEM replacement part for GE refrigerators. This small but essential component serves as a seal and insulator around the area where the fan motor shaft protrudes from the appliance body.
Causes of needing to replace the fan motor grommet can include normal wear and tear over time, exposure to extreme temperatures or moisture, or physical damage due to impact or improper installation.
Symptoms of a faulty or missing grommet include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in... Read more
The Pan Middle Asm is an OEM part for GE refrigerators. It is designed to fit within the refrigerator's interior as a middle drawer or shelf, providing an organized space for storing items such as deli meats, cheeses, and other perishables. This component helps maintain the cleanliness and organization of your refrigerator by offering a dedicated storage area that is easily accessible.
Causes of a bad Pan Middle Asm can include physical damage such as cracks or warping, issues with the sliding mechanism if it does not move smoothly, or the pan becoming brittle and breaking due to low temperatures or aging.
Symptoms of a bad Pan Middle Asm include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Bought a new vegetable drawer. It was an expensive fix but well worth it because now my drawer doesn't fall when I open it. That was a pain especially since the drawer is so huge. Love the fact that it's a big drawer but the drawback is that the drawer gets so heavy that it broke the plastic on the back of the drawer. I noticed that the new drawer was reinforced in that area. So that is very appreciated. My fridge is like new again :) Read more
The Ice Door Assembly is an OEM part for GE refrigerators. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup.
Symptoms of a bad Ice Door Assembly include:
Causes of a bad Ice Door Assembly can include mechanical wear from frequent use, failure of the spring mechanism or solenoid that operates the door, or damage to the sealing surfaces that leads to air leaks.
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more
The Ice Dispenser Solenoid is an OEM replacement part for GE refrigerators. It is a crucial component that controls the flow of ice from the ice maker to the dispenser chute.
Symptoms of a bad ice dispenser solenoid include:
Causes of a bad solenoid can include electrical malfunctions, physical obstructions preventing proper operation, or simply wear and tear over time.
The Fruit and Vegetable Pan Shelf is an OEM part for GE refrigerators. Designed to provide sturdy support and optimal storage for fruit and vegetable pans, this shelf is an essential component for organizing and accessing your produce with ease. It fits snugly above the fruit and vegetable drawers, maximizing space utilization within the fridge and helping maintain the freshness of fruits and vegetables by ensuring proper air circulation around them.
A damaged or missing fruit and vegetable pan shelf can lead to disorganization and inefficient use of space in your refrigerator.
Symptoms of a bad Fruit and Vegetable Pan Shelf include:
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
The Refrigerator Shelf is an OEM part for GE refrigerators. It is designed to provide robust and flexible storage solutions within the refrigerator, allowing for the efficient organization and accessibility of food items. Made from high-quality materials, this shelf is built to withstand the typical wear and tear of everyday refrigerator use while maintaining its structural integrity and appearance.
Symptoms of a bad Refrigerator Shelf include:
Causes of a bad shelf can stem from overloading beyond recommended limits, accidental damage from handling, or material degradation over time due to exposure to cold temperatures and moisture.
Put it in. Read more
The Water Tank Assembly is an OEM part for GE refrigerators, designed to store and chill water before it's dispensed through the refrigerator's water dispenser. This integral component ensures that you have immediate access to cold, fresh water without the need to open the refrigerator, helping to conserve energy and maintain the internal temperature.
Over time, the water tank assembly can experience issues such as leaks, cracks, or the buildup of contaminants, all of which can affect the quality and taste of your water.
Symptoms of a bad Water Tank Assembly include:
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
The Pan Bottom Assembly is an OEM part for GE refrigerators. This component is the bottom drawer or bin in the refrigerator, typically used for storing fruits and vegetables at optimal humidity levels. It slides into the lower part of the refrigerator, offering convenient storage that helps keep produce fresh longer by maintaining a separate climate from the rest of the refrigerator. It measures approximately 22 inches wide, 15 inches tall, and 19 inches deep.
Symptoms of a failing Pan Bottom Assembly include:
Causes of a bad pan bottom assembly often involve excessive weight being placed inside the drawer, frequent use which can lead to wear and tear, or temperature fluctuations that cause the material to weaken or deform over time.
Ordered new drawer from your company. It fit beautifully. Thanks. Read more
The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure.
Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.
Symptoms of a bad Refrigerator Union Connector include:
We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as... Read more
The GE XWFE Refrigeration Water Filter is an OEM part for GE refrigerators. This advanced water filter is designed to reduce a wide range of contaminants, including chlorine, lead, cysts, and select pharmaceuticals, providing clean and safe drinking water and ice. It seamlessly integrates into the refrigerator's filtration system, ensuring optimal water quality.
You should replace this water filter if it becomes clogged or reaches the end of its lifespan, typically every six months. Common causes of a bad water filter include excessive contaminants, improper installation, or failure to follow the replacement schedule.
Symptoms of a bad water filter include:
Ordered a new one. Read more
The Dairy Door is an OEM part for GE refrigerators. It is designed to fit into the refrigerator door and provide a covered compartment for storing butter, cheese, and other dairy products. This compartment helps to keep these items at a slightly different temperature than the rest of the refrigerator, which can extend their freshness.
Symptoms of a bad Dairy Door include:
Causes of a bad dairy door can include normal wear and tear from frequent opening and closing, accidental damage from loading or unloading items, or material degradation from exposure to the various conditions inside a refrigerator.
Just enter the appliance model and the all the parts are pictured! Really easy! Read more
The Board LED Light Assembly is an OEM part for GE refrigerators. It is responsible for illuminating the interior of the refrigerator, providing clear visibility of its contents.
Causes of a bad LED light assembly can include electrical issues such as power surges, worn-out components over time, or damage due to moisture exposure. These issues can result in inadequate lighting or complete failure of the LED light assembly, making it difficult to see inside the refrigerator.
Symptoms of a bad LED light assembly include:
Replaced light bar. Read more
The Defrost Heater Kit is an OEM part for GE refrigerators. It is designed to prevent frost and ice buildup within the freezer compartment by heating up at regular intervals to melt away any accumulated frost. For 12-inch glass tube heater use WR51X10055.
Symptoms of a bad Defrost Heater Kit include:
Causes of a bad defrost heater can include failure of the heating element due to wear or a burnt-out component, malfunctioning sensors that regulate the defrost cycle, or electrical issues preventing the heater from activating.
Yes, a 49-yr old woman fixed this fridge all by herself! AppliancePartsPros was very helpful in the diagnosis of the problem, which I determined to likely be the result of defrost failure. There was a large amount of ice and frost coating the back of the freezer despite the inside temp being 42 degrees. My husband thought I was crazy to think it was a problem with ice when the temperature was warm, but I told him to trust me and I would attempt the repair. He just wanted to throw the old one... Read more
The Isolation Valve and Jumper Kit is an OEM part specifically designed for GE side-by-side refrigerators. This kit includes both an isolation valve to independently stop water flow to the refrigerator's icemaker unit as well as a jumper to bypass the valve when closed. Symptoms of needing an isolation valve replacement include:
Causes necessitating a new isolation valve can stem from mineral buildup obstructing full valve closure or sealed components wearing down over extended use. This OEM part is compatible with Hotpoint, RCA and select Kenmore GE side-by-side models as well.
Ordered the part, and got it super fast. Took about 20 min. to replace and we are good as new! Read more
The Condenser Fan Motor is an OEM part for GE refrigerators. This fan motor circulates air in the fridge, helping to cool the compressor and condenser coils for better temperature control. It also evaporates extra water in the drain pan, stopping problems from water buildup.
Symptoms of a failing condenser fan motor include:
Causes of condenser fan motor failure typically include wear and tear from continuous use, dust and debris accumulation obstructing fan movement, or electrical issues such as faulty wiring or capacitor problems.
Note: This is a (12-volt DC) fan motor. For the (115-volt AC) fan motor, order part number WR60X10220.
New cond fan & new evap fan & new defrost heater unit Read more