Need Help?
Call or text
The Oven Temperature Sensor Assembly is an OEM replacement part for GE electric wall ovens. It is responsible for accurately reading the oven's internal temperature to provide precise temperature control and safe operation. Consistent and precise temperature readings are necessary for repeatable cooking results.
Symptoms of a bad temperature sensor include:
Causes of a faulty sensor can be due to failures over extended usage, exposure to high heat cycles, or impedance changes due to dirt or mineral deposits. Precise temperature readings allow for confident cooking.
This OEM GE replacement sensor is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.
My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out... Read more
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more
The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.
Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.
Symptoms of a faulty monitor switch include:
This genuine GE switch is also compatible with select Hotpoint and RCA models.
The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.
Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.
Symptoms of a bad fuse include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I read on line about other such ovens doing the same thing mine was doing, absolutely nothing! I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile. Read more
The Thermal Fuse is an OEM part for GE ranges. This component is a safety device to protect the range from overheating. It is located in the electrical circuit and acts as a fail-safe to cut off the power supply to the range if it detects excessive heat.
Causes of a faulty thermal fuse can include power surges, overheating due to prolonged use, or other electrical issues. When the fuse blows, it interrupts the electrical flow, preventing potential damage to the range's sensitive components and ensuring user safety.
Symptoms of a bad fuse may include:
The F9 error code is supposed to indicate that the door lock mechanism has failed. My oven would give the F9 code and turn off during normal baking at 400 F after about 30-40 minutes. It turns out that GE must have programmed the error codes incorrectly in my model, because the real problem was that my control board cooling fan was no longer functional, and one of the two thermal switches was shutting off the unit when the control board area got too hot. AppliancePartsPros.com is one of the... Read more
The High Voltage Diode is an OEM part for GE microwaves. This high-voltage diode is crucial for converting alternating current (AC) to direct current (DC), enabling the magnetron to generate the microwave energy needed for cooking. Measuring approximately 3-1/2" in length, this diode features a banded side with a #8 ring terminal and a non-banded side with a 1/4" female quick connect.
You should replace the diode-H.V assembly if it becomes faulty due to electrical issues, wear and tear, or physical damage. Continuous exposure to high voltage can cause the diode to deteriorate over time, leading to malfunction.
Symptoms of a bad diode-H.V assembly include:
Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more
The Guide Roller Assembly is an OEM part for GE microwaves. It supports the turntable as it rotates, ensuring even cooking by allowing the turntable to move smoothly and consistently. This assembly typically includes the rollers and the frame that houses them, fitting securely at the bottom of the microwave cavity.
Common causes of a bad guide roller assembly include normal wear and tear, exposure to heavy loads, or accidental impacts.
Symptoms of a bad guide roller assembly include:
Got a new roller assembly. Came sooner than expected. Fit perfectly. Happy ending. Read more
The Element Broil Assembly is an OEM replacement part for GE electric ranges. This assembly holds and secures the upper heating element that provides intense heat for broiling food items directly above the heating coils. Proper functioning of the element broil assembly allows for consistent and efficient broiling performance. Symptoms of a bad element broil assembly include:
Causes of failure can be normal wear over time, damage from harsh cleaning chemicals, or issues like bending or warping that prevent secure mounting of the broiler element. This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced broiler element with new one. We had difficulties in locating the correct element for my oven. Read more
The Hi-Limit Switch is an OEM replacement part for GE ranges. It is a safety component responsible for monitoring internal oven temperatures. The hi-limit switch helps prevent overheating by detecting when excessive heat has built up inside the oven cavity. It will automatically cut power to the bake/broil elements if temperatures rise too high. Causes of a bad hi limit switch can include normal failure after years of exposure to heat, or issues with the electronic components or calibration. Symptoms of a bad hi-limit switch include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Ohmed the oven heat elements and oven sensor, they checked out fine. No broken or bad connections. Figured it had to be high limit switch opening or control panel. With Christmas meal around corner I ordered both. Oven working fine and my wife is happy. Read more
The Halogen Bulb Kit is an OEM replacement part for GE ranges. It includes replacement halogen light bulbs that illuminate the interior of the range. P
Causes of bad bulbs can include normal burnout over the lifespan of the bulbs or damage from excessive heat. Halogen bulbs are prone to fail after a few years of use in the hot oven environment.
Symptoms of bad or burnt out bulbs include:
Called Appliance Parts Pros and they helped me. I could not find my Model # of the Oven However the mentioned to me if the bulb I ordered was not the part that they would refund my money Read more
The Window Pack Assembly is an OEM part for GE ranges. This part allows you to monitor your food while it cooks without opening the door and letting heat escape. The assembly ensures clear visibility and helps maintain the oven's internal temperature for consistent cooking results.
Causes of a bad window pack can include accidental impacts, thermal stress from repeated heating and cooling cycles, or manufacturing defects.
Symptoms of a bad window pack assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Chatted on-line with one of the customer service representatives. He helped me select and order the correct part and also gave some basic instructions. Part arrived with several days of ordering. Read more
This 10-32 machine screw secures brackets, panels, and other hardware in cooking appliances. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned and safely fastened. What it does:
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
This bimetal limit switch monitors a radiant surface element's temperature and opens the circuit if it overheats, helping your cooktop maintain safe, consistent heating while protecting wiring and controls from damage. What it does:
We initially called a repair company who immediately diagnosed the fan, without opening up anything. They quoted $550 to repair. $159 of that was the fan part. Plus they told me the parts come from overseas and will take 2 week to arrive. I researched the model number and can part and found exactly what I was looking for on your site. Plus there were diagrams and forum discussions that boosted my confidence on repairing ourself. Using your parts diagrams and our manual information, we pulled... Read more
This oven door gasket seals the perimeter of the door to keep heat inside the cavity. Replacing a worn seal helps maintain consistent temperatures and proper preheat, improving baking performance and preventing heat from leaking around the door.
First watched youtube instruction video. Ordered gasket. Delivered in 2 days. Removed old gasket and replaced with new in about 15 minutes. Wife happy. Read more
ST10-16 X 7/16"
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more
This magnetron assembly generates the microwave energy that heats food. Replace a weak or failed unit to restore proper cooking performance and resolve no-heat complaints when the microwave appears to run but no longer warms items. What it does:
I ordered the capacitor, diode, and magnetron in hopes that I would be able to complete the repair using the less expensive parts. I first removed the oven from the wall and then I removed the metal housing to access the internal parts. I discharged the capacitor using a pair of insulated needle nose pliers. Then I changed out the diode and the capacitor and reassembled the unit and tested it. It still did not heat so I disassembled the unit again and replaced the magnetron this time.... Read more