Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more
The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.
Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running.
Symptoms of a bad Door Interlock Switch include:
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are... Read more
The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.
Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.
Symptoms of a faulty monitor switch include:
This genuine GE switch is also compatible with select Hotpoint and RCA models.
The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.
Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.
Symptoms of a bad fuse include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I read on line about other such ovens doing the same thing mine was doing, absolutely nothing! I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile. Read more
Replaces cracked, broken, or missing microwave door handle. Attaches to outer door panel for secure grip when opening and closing. Easy DIY repair.
Replacing the handle fixed the problem. Watching a video walked me though the replacement. Read more
The Halogen Lamp is an OEM replacement part for GE microwaves. It provides optimal interior light for monitoring food as it cooks. Consistent illumination supports convenience and usability.
Causes generally involve standard wear of the lamp coil and filament from heat and electromagnetic forces during operation. Accidental damage is another potential issue.
Symptoms of a bad halogen lamp include:
This GE OEM replacement is compatible with some Hotpoint, RCA, and Kenmore models.
The light inside the microwave oven was out. I could not see where it was and how to get at it because the inside is a continuous box. Went online to youtube for my oven model and sure enough a very well made demonstration of how to replace the light bulb was there. Found the part number from AppliancePartsPros.com, ordered, and in a few days the new bulb was there, and it was easy to replace. Read more
Black vent grille cover for microwaves. Conceals ventilation system while directing airflow. Replace if cracked, broken, or missing. Easy installation.
Replace with new one. Read more
Traps grease and oil from cooking. Replace when clogged or discolored to maintain proper ventilation. Dishwasher safe for easy cleaning. Verify fit.
Ordered microwave filters to supplement those supplied with a new unit. Order was complete and expedited as advertised. Very satisfied with the service provided. Read more
Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.
Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.
Removed light cover. oven was above range type and light assbly is at rear bottom of unit. access and visibility of bulb sockets a bit difficult, Usen hand hell mirror to assist . Bulb extraction and insertion a snap. Read more
Turntable stopped turning or making grinding noise? This motor rotates the glass plate for even cooking. Easy 5-10 minute DIY fix with basic tools.
I fix this problem by purchasing a new turntable motor. Simple 5 minute installation. Read more
Illuminates the microwave cavity for viewing food during cooking. Replace when dim, flickering, or burned out. Confirm fit with your model number.
Tried to turn the microwave on, checked the outlet for power, check the breaker to see if it was tripped, all was in order. Removed the over the range microwave and pull the covers, Tested continuity with a multimeter for each of the 4 normally closed thermostats, found 2 bad (open). The upper 110 and the lower right 70. Ordered the needed parts as well as both lamp sockets and bulbs as they where broken too. The parts where correct and where delivered on time. (Also, in your tools needed or... Read more
Absorbs odors and filters grease from microwave exhaust. Replace when air quality diminishes or every 6 months. Verify fit with your model number.
Ordered the charcoal filter Lowe's told me to order. It was the wrong one and arrived damaged anyway. The AppliancePartsPros person I talked to gave me a credit for the wrong filter and sent me the right filter. It arrived in one day, plus it was almost $30 cheaper than the one Lowe's told me I needed. I couldn't be more pleased with the service and prices at AppliancePartsPros. Thank you. Read more
Structural support bracket that secures the microwave door handle. Replace if cracked, broken, or no longer holding the handle firmly in place.
After reading other folk's comments on making this repair, I got a good general idea of how to do this repair. Just go slow, take your time. Easier to do this job if door is just removed off the hinge pins.Be very careful with plastic trim frame on inside of door..fragile. I used a penknife to get it started. Read more
Replace your cracked, broken, or missing microwave glass cooking tray. Sits on the turntable to hold food during heating for even rotation and cooking.
Arrived in a huge box nice and safe......thank you Read more
The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.
Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.
Symptoms of a bad Mounting Plate include:
Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.
Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.
Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.