Kenmore / Sears Trash Compactor Parts

The Trash Compactor Bags are OEM parts for Whirlpool trash compactors. These heavy-duty bags are designed to fit securely within the trash compactor, ensuring that waste is contained and compressed efficiently. They are built to withstand the pressure and volume of compacted trash, preventing leaks and tears. This is a 60-pack.

You should replace these trash compactor bags regularly to maintain optimal performance. Over time, bags can become overfilled, punctured, or weakened due to the weight and sharp objects in the trash.

Symptoms of bad trash compactor bags include:

• Bags tearing or leaking during use
• Difficulty in fitting the bags properly into the compactor
• Overflow or spillage of waste
• Noticeable odor from the trash compactor

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The On/Off Rotary Switch Kit is an OEM part for Whirlpool trash compactors. This kit includes the rotary switch and necessary components to control the power and operation of the trash compactor, allowing users to turn the unit on and off easily.

Causes of a bad rotary switch can include electrical wear and tear, damage from repeated use, or issues with the internal contacts. Over time, these factors can lead to the switch becoming unresponsive or failing to control the compactor properly.

Symptoms of a bad rotary switch include:

• The trash compactor not turning on or off
• Intermittent operation of the compactor
• The switch feeling loose or unresponsive
• Electrical sparking or unusual noises from the switch area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Universal Trash Compactor Bags are an OEM part for Whirlpool trash compactors. Designed to fit seamlessly with your appliance, these durable bags are crafted to handle the stress of compacted waste without tearing. Each bag measures about 15 inches wide by 33 inches high.

Symptoms of a bad compactor bag include:

• Bags tearing during compaction
• Frequent need for replacements due to poor fit
• Unpleasant odors escaping due to breaches in the bag

Causes of poor performance in trash compactor bags typically stem from using non-OEM bags that aren’t designed for the specific pressures and dimensions of your model, or overloading the bags beyond their capacity.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Foot Pedal Kit is an OEM replacement part for Whirlpool trash compactors.

Causes can be attributed to stress fractures developing over years of repetitive flexing through thousands of compressions. Constant impact also accelerates the wear of plastic hinges and snap fittings.

Symptoms of a bad kit include:

• Pedal sticking, binding, or unresponsiveness during use
• Engaging the wrong compaction cycles
• Cracked or split pedal housing compromising sealing and durability
• Damaged connectors interrupting communication with the motor

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Roller Assembly is an OEM replacement part for Whirlpool and KitchenAid trash compactors. It includes dual plastic roller drums that grasp and compact trash inside the waste cylinder. The assembly comes with 2 rollers. 

Causes of faulty or worn rollers include years of continuous daily use compressing a wide variety of trash materials. 

Symptoms include:

• Inability to fully compact bags into tight, uniform bricks  
• Loose, inefficient compaction allowing excess empty space
• Excessive odors escaping around poorly compressed bags
• Visible cracking or flat spots on roller gripping surfaces

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drive Motor is an OEM part for Whirlpool washing machines. This part powers the agitator and spinning the drum, facilitating the various cycles of the washing machine to ensure clothes are thoroughly cleaned.

Causes of a bad drive motor can include general wear and tear over time, overheating, electrical issues, or mechanical failures within the motor components.

Symptoms of a bad Drive Motor include:

• Washing machine not agitating or spinning
• Loud or unusual noises during operation
• Burning smell coming from the motor
• Washer stopping mid-cycle or not starting at all

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Compactor Bag Caddy is an OEM component specifically designed for Whirlpool trash compactors. This caddy holds trash compactor bags securely in place during the compaction process. It measures about 8 inches wide by 16 inches high by 11 inches deep.

Symptoms of a bad compactor bag caddy include: 

• Bags not fitting, sliding, or twisting improperly during use
• Reduced internal storage volume within the compactor unit
• Difficulty removing full bags after compaction cycles  

Causes of failure can be cracks or breaks from repeated insertion/removal of bags over time, damage inhibiting bags from seating fully, or issues affecting durability.

This part is also compatible with garbage disposals and compactors from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brands.

For use on power screw and ram pressure pads. Size: 4 oz. can.

Color: Stainless steel

Color: Black

This replacement stud is a factory-specified piece of hardware used to secure components in your appliance. Replacing a worn, stripped, or missing stud restores a solid fit to help reduce looseness and vibration. What it does:

• Provides a mounting point to fasten specified parts or panels
• Helps keep components aligned and secure during operation
• Replaces damaged, corroded, or missing original hardware
• Can resolve symptoms like loose parts, rattling, or misalignment where this fastener is used

• 1 stud

• Disconnect power; shut off water and/or gas supply if applicable
• Access the mounting location per your model's service information
• Start threads by hand to avoid cross-threading; tighten only until snug
• Reuse any original washers, clips, or nuts if required and in good condition

This replacement control knob fits over the control shaft to select cycles, temperatures, or functions. It restores a secure grip and clear pointer when the original knob is cracked, stripped, or missing, returning smooth, accurate adjustments.

• Mounts to the control shaft to change and indicate settings
• Replaces knobs that are cracked, wobble, spin freely, or fall off
• Helps with symptoms like difficulty turning the control or inconsistent selections
• Restores a clean, finished look to the control panel

• Disconnect power (and gas, if applicable) before servicing.
• Pull the old knob straight off the shaft—do not twist the control stem.
• Align the D/flat/keyed insert with the shaft and press the new knob on until fully seated—do not force.
• If your original used a spring clip or set screw, transfer/adjust as needed.

To order knob for this switch use WP4155141.

This replacement off-position switch restores reliable on/off control for the appliance's control assembly, letting the unit fully power down when set to the off position. Simple swap restores normal power control and user safety. What it does:

• Replaces the control panel's off-position switch so the appliance can be turned completely off.
• Resolves symptoms like the appliance not powering down, intermittent shutdowns, or controls that don't respond when switched off.
• Connects using the existing wire terminals or plug-in connector—matches the original switch location and function.
• Provides a direct, mechanical off position to stop electrical flow to the associated circuit.

• Always disconnect power (unplug or shut off breaker) before starting any repair.
• Access requires removing the control panel or console; note connector orientation before disconnecting.
• Inspect wire terminals for corrosion or damage and replace/repair wiring if needed before installing the new switch.

Power screw hub is a replacement drive hub that secures the washer's drive screw/agitator to the transmission, helping restore proper agitation and reduce slipping. Fits applications where a worn or broken hub causes drive loss. What it does:

• Transfers rotational force from the drive screw/agitator to the transmission so the washer can agitate or spin.
• Replaces stripped or worn splines that allow the agitator or drive screw to slip under load.
• Common symptoms it can help fix: agitator or drum won't engage, intermittent agitation, grinding or squeaking during cycles.
• Install replacement if splines are visibly damaged or if the hub no longer holds the drive assembly securely.

• Disconnect electrical power (and water supply if applicable) before beginning any repair.
• Remove agitator/drive components; use the correct tools to avoid further spline damage.
• Inspect mating splines and fasteners; replace any damaged hardware and clean the area before installation.
• After reassembly, run a short test cycle to confirm normal operation.

This precision thrust race serves as the hardened bearing surface for axial loads in a rotating mechanism. Replacing a worn race reduces friction and noise, helping restore smooth, consistent motion and protect companion thrust bearings and washers from accelerated wear.

• Provides the hardened bearing surface for a thrust bearing assembly
• Supports axial load and helps maintain proper end-play in the mechanism
• Reduces friction to allow smoother rotation under load
• Wear may present as grinding/scraping noises, rough or binding motion, excessive axial play, or visible scoring

• Disconnect power and shut off water/gas before servicing
• Access the thrust-bearing area; note the order and orientation of races, bearings, and washers for reassembly
• Clean mating surfaces; replace any worn companion parts and lubricate only if specified by the service documentation
• Seat the new race fully and verify free movement by hand before reassembly and testing