Kgct265x-Wh1 Parts

I have tried to remove the burner assemblies by removing the torx screws but they were badly rusted, and unfortunately they all were broken during removal. I just discarded the ruined orifices and assembled the new orifices and burner assembly. Read more

Orders set of four pads. Came in the mail about three days later. Replaced lost pad and it fit perfectly. Read more

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more

My stove is probably 15 years old and when I was removing the screws that hold the burner in place on top of the stove top, both of them broke off so I had to replace the entire assembly. APP had all the parts I needed and were helpful on the phone. However when I was attempting to loosen the gas line to the burner the tubing wouldn't release from the brass nut and the tubing twisted too much. Even though it didn't appear broken I wasn't comfortable knowing the metal was surely weakened so I... Read more

Replaced all the grommets with the new ones that were purchased. Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

I called a rpair service. The men came to the house, torn apart the stove top and advised Replacement of the wire harness. The trip charge of $100 would be deducted from a repair bill of $350, thus they needed an additional $150 for parts and $100 for labor after paying the trip charge. I bought the harness for $60, and the star bits I needed for my drill for $10. My son and I installed the new harness in about 30 minutes, which included a thorough cleanup, saving us $180. Read more

Simple. Just pulled out the old and popped in the new. Rangetop looks much better, though grates and burner rings (no longer available) could use repainting with heat resistant enamel or some other treatment. Read more

I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to... Read more

Simple. Just pulled out the old and popped in the new. Rangetop looks much better, though grates and burner rings (no longer available) could use repainting with heat resistant enamel or some other treatment. Read more

The knobs were perfect. However, the grommets arrived in black rather than white. A phone call to customer service informed me that this part is no longer available in white and that the site would remove the photo. Rather than return the plastic grommets I spray painted them with white Rust-oleum paint for plastic that was in the garage and they look fresh and new. Read more

I order the parts from 'Appliance Parts'. They were well-priced, and arrived on time. All I had to do was remove the old knobs, and install the new ones. Read more

Ordered spark module//fixed in 5 minutes. the repair shop wanted to charge me 450DOLLARS FOR REPAR AND PART Read more

Replaced damaged burners and all screws using anti-seize. Also I found that a couple of the gas lines had seized in the nuts, so I replaced the lines with 1/8" copper tube and new compression fittings. Read more

I decided to replace the whole orifice instead of just the 'spark plug'. In doing so it became apparent that the screws would not come off easily and so I purchased a couple of those to make sure I had enough just in case. Good thing, 2 were messed up taking them out. It was also pretty dirty after 13 years of cooking so I took the time to clean up most of the bits. It was a difficult thing to do and took me a while to get thru all the screws in correct order to remove the part and... Read more