Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Hinge Cable Assembly is an OEM replacement part for LG dishwashers. It consists of cables and springs that connect the dishwasher door to the tub, allowing controlled door opening and closing movements. The cable assembly allows for smooth opening and closing of the dishwasher door while providing counterbalancing weight to offset the door weight. It has 2-inch by 3/4-inch plastic pieces and an 8-inch rope section.
Causes of hinge cable failure stem from repeated opening/closing actions gradually fatiguing the cable material combined with potential corrosion developing on springs over years of use cycles.
Symptoms of a damaged hinge cable assembly include:
This genuine LG assembly is also compatible with select Sears/Kenmore dishwasher models as well.
We knew at least one door hinge cable assembly or hinge spring was broken (the door started falling down rapidly and became heavy to close) so we ordered two of each since we had read to go ahead and replace the damaged items on both sides. While we were waiting on the order, the other side must have broken-the door became incredibly heavy and instead of falling open, started crashing down unless it was carefully lowered. We feared it would fall on one of our animals and kill them. We did not... Read more
The Drain Pump is an OEM replacement part for LG dishwashers. It is a component responsible for removing water from the dishwasher tub during the drain cycles.
Symptoms of a bad dishwasher drain pump:
Causes of a faulty drain pump can include clogging or obstructions in the pump or hose, mechanical wear and tear over time, or electrical malfunctions preventing the pump from operating correctly.
This OEM LG part is also compatible with Sears/Kenmore dishwasher models.
First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more
The Diverter Motor Assembly is an OEM part for LG dishwashers. It is a critical component used to control the direction of water flow within the dishwasher, ensuring that water is properly diverted between the different spray arms during various wash cycles.
Symptoms of a failing Diverter Motor Assembly include:
Causes of a bad diverter motor can include wear and tear from regular use, electrical issues such as faulty wiring or motor failure, and mechanical obstructions or debris that prevent the diverter from moving smoothly.
This OEM LG part is also compatible with Sears/Kenmore models.
I ordered a new vario motor and a soap dispenser. I turned off the water and the breaker, disconnected the water line and the power at the front base of the unit, disconnected the drain hose from the garbage dispenser, and pulled out the dishwasher and laid it on a blanket on its face. I unscrewed and removed the plainly visible vario motor on the bottom of the machine and removed the cam from the shaft. I then used a needle nose plier to carefully turn the D-shaft on the new motor to exactly... Read more
The Hinge Spring is an OEM part for LG dishwashers. This spring works with the door hinge to provide the necessary tension for smooth opening and closing of the dishwasher door, ensuring it stays securely in place when opened or closed.
Over time, the hinge spring can become worn out or break due to regular use, metal fatigue, or accidental impacts. Causes of a bad hinge spring include excessive wear, rust or corrosion, and physical damage from forceful door operation.
Symptoms of a bad hinge spring include:
The Nozzle Assembly is an OEM part for LG dishwashers, designed to enhance the efficiency and effectiveness of the water spray during the wash cycle. This component directs water to the dishes to ensure thorough cleaning and rinsing. Positioned strategically within the dishwasher, the nozzle assembly plays a role in distributing water evenly across all dishes, regardless of their placement in the rack.
The causes for these issues can range from clogs within the nozzle from food particles or mineral deposits from hard water, to physical damage that can occur through wear and tear or during loading and unloading of dishes.
Symptoms of a failing Nozzle Assembly include:
This OEM LG part is also compatible with some Kenmore models.
I ordered the sprayer arm (nozzle assembly) and guide assembly. It took about five minutes to remove the old and install the new. Very simple and fixed the problem. Read more
The Dishwasher Inlet Valve is an OEM part for LG dishwashers. This valve controls the flow of water into the dishwasher, opening to allow water in at the start of the wash cycle and closing to prevent any further water entry once the desired level is reached. It ensures that the dishwasher receives the correct amount of water for optimal cleaning performance.
Causes of a bad inlet valve can include mineral deposits or debris clogging the valve, electrical issues, or general wear and tear from prolonged use. A malfunctioning valve can lead to improper water levels and potential flooding.
Symptoms of a bad dishwasher inlet valve include:
Replaced the water supply valve and the drain dump valve. The drain hose had to be replaced also. Read more
The Lower Dishrack Roller is an OEM part for LG dishwashers. This roller assists in the smooth movement and positioning of the lower dishrack during operation. It plays a key supportive role in organizing and accommodating dishes of various sizes and shapes.
Causes of a bad roller can include wear and tear from repeated use, damage from excess weight or impact, or accumulation of debris that hinders movement.
Symptoms of a bad lower dishrack roller include:
This LG part is also compatible with some Kenmore models.
Ordered the part and snapped it on. Read more
The Cam Motor Shaft Seal is an OEM part for LG dishwashers. It provides a watertight seal around the cam motor shaft, preventing water from leaking into the motor and other electrical components. This seal is essential for maintaining the efficiency and safety of the dishwasher.
You should replace the cam motor shaft seal if it becomes worn out or damaged. Common causes of a bad shaft seal include regular wear and tear, exposure to high temperatures and chemicals from detergents, or improper installation. A compromised seal can lead to leaks and potential damage to the motor.
Symptoms of a bad cam motor shaft seal include:
This was a very simple repair. It was done in about an hour. It involves disconnecting the dishwasher, emptying the water from the inside, taking it out and flipping it over, and replacing the diverter motor. This repair is done on the underside of the dishwasher, nothing to disconnect inside (just remember to remove the baskets). It would be wise to order the motor seal and micro switch that goes with it as they are all cheap parts and easy to swap out during the procedure. Be sure to take... Read more
The Outer Door Seal is an OEM replacement part for LG dishwasher doors. Situated around the door opening, it creates a tight seal when closed to contain moisture, heat, and germs within the wash chamber. Proper door sealing is essential for sanitization, drying performance, and protection of surrounding cabinetry. Causes can be deterioration of sealing material over extended use, cracks or deformities allowing passage of water and air, or damage from closing force on the rigid door. Symptoms of a bad seal include:
This OEM LG part is also compatible with some Sears/Kenmore dishwashers.
Ordered and replaced inner and outer door seals. Was real easy just pop the new ones in place. Read more
The Guide Assembly is an OEM part for LG dishwashers. It directs water from the pump to the middle spray arm, ensuring that water is evenly distributed to clean dishes effectively on the upper racks.
Causes of a bad manifold guide can include wear and tear, accumulation of debris, or damage from heavy items in the dishwasher. A malfunctioning manifold guide can lead to poor cleaning performance and inefficient water distribution.
Symptoms of a bad middle spray arm manifold guide assembly include:
The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment.
Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter.
Symptoms of a bad Noise Filter Assembly include:
Searched the web and determined it was something called a noise filter. Ordered the part from ApplianceParts Pros. Received it in about 3 days, normal shipping. Replaced the part. Took about 15 minutes from start to finish. Problem solved. Cost less than $50. Read more
The Upper Rack Assembly is an OEM part for LG dishwashers. This part provides a durable and efficient space for washing glasses, cups, and smaller dishes. This assembly maximizes the cleaning capacity of your dishwasher, allowing for the organized placement of items to ensure they are thoroughly cleaned and dried.
Causes for issues with the upper rack assembly often involve prolonged exposure to water and detergent, leading to rust or corrosion, physical damage from loading or unloading, or wear and tear from regular use.
Symptoms of a malfunctioning Upper Rack Assembly include:
The new racks just slide into the slot spaces easily. The new items seem redesigned better than the factory original. Read more
The Silverware Basket is an OEM part for LG dishwashers. As an integrated rack in the lower dish rack assembly, it neatly holds cutlery like forks and knives during wash cycles. Proper installation in accordance with manufacturer instructions is important for function. Causes of issues could include cracks developing in plastic holdings clips over time. Improper loading may also cause breaks or wear. Symptoms of a problematic basket may include:
This is an LG OEM part that is also compatible with some Kenmore models.
The Heater Assembly is an OEM replacement part for LG built-in dishwashers. It houses several heating elements that work to raise the temperature of the water during the hot washing and drying cycles. Proper heat is essential for removing stubborn soils and ensuring dishes are fully sanitized.
Causes of a bad heater assembly can include broken, cracked, or burned-out heating elements due to age. Corroded connectors may impair power delivery over time. Mineral buildup inside the assembly reduces heat transfer efficiency.
Symptoms of a bad heater assembly include:
This OEM LG part is also compatible with Sears Kenmore models.
Replaced heating element, Read more
The Locker Assembly is an OEM replacement part for LG dishwashers. It securely holds the dishwasher door lock in place during operations and transport.
Symptoms of a bad locker assembly include:
Causes of a bad locker assembly can include broken components or wear over extended use reducing its secure attachment.
This LG replacement part is also compatible with Sears/Kenmore dishwashers.
Easy fix part came overnight kentucky to california fixed stuff 60 plus years so no sweat! Read more
The Dishwasher Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting the door's position, ensuring the dishwasher only operates when the door is securely closed. This switch helps maintain safety and proper functioning during the wash cycle.
Causes of a bad micro switch can include wear and tear from regular use, electrical malfunctions, or physical damage. A compromised micro switch can prevent the dishwasher from starting or stopping correctly.
Symptoms of a bad dishwasher micro switch include: