Mt1510b Parts

• No heat

After dismounting the unit from its wall-hanging bracket, the most tedious part of the repair was removing over a dozen screws holding the cover in place from the top, bottom, and both sides. Fortunately, I had placed the unit on a bench that allowed me to slide the unit allowing access to the screws on the bottom edges of the unit. Always discharge the capacitor before continuing to work on the unit by discharging the capacitor by shorting the contact without the diode to ground. Access to the... Read more

Checked the three door switches; used ohm meter to see if there was resistance or if a switch was bad. 2 out of 3 switches showed resistance with the ohm meter. The last one tested (of course the last one) NO (normally open) did not show resistance; I.e. the ohm meter reading did not change when the switch was depressed. Appliance parts pros was the only company that had the same model number I was looking for (SZW-V16-FD-63). I ordered the relay switch, 2 days later it arrived (regular... Read more

Checked the three door switches; used ohm meter to see if there was resistance or if a switch was bad. 2 out of 3 switches showed resistance with the ohm meter. The last one tested (of course the last one) NO (normally open) did not show resistance; I.e. the ohm meter reading did not change when the switch was depressed. Appliance parts pros was the only company that had the same model number I was looking for (SZW-V16-FD-63). I ordered the relay switch, 2 days later it arrived (regular... Read more

• No heat

I am not an appliance repair man. I am a general surgeon. I went online and researched the problem. The consensus was that my magnetron and diode were the most likely culprits. To replace my microwave with a comparable model would have cost at least $800. The diode and magnetron cost around $170. I watched a few videos on YouTube demonstrating how to do the repair safely and I felt like I could do it. I ordered the parts on a Monday evening and had them Wednesday. The only difficult part of... Read more

• Won't start

First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &... Read more

• Won't start

I have a Jenn-Air microwave that didn't turn on and had no lights. It just stopped working completely. I unplugged the unit and had to remove the rear cover using a *security screw kit* that prevents people from opening the rear panel. Once opened, I removed the fuse and testing it with an OHM reader to determine that the fuse went bad. But I also had to determine why the fuse blew and noticed a sticky oily substance under the Capacitor. I used a rubber glove and needle nose pliers to... Read more

• No heat

I am not an appliance repair man. I am a general surgeon. I went online and researched the problem. The consensus was that my magnetron and diode were the most likely culprits. To replace my microwave with a comparable model would have cost at least $800. The diode and magnetron cost around $170. I watched a few videos on YouTube demonstrating how to do the repair safely and I felt like I could do it. I ordered the parts on a Monday evening and had them Wednesday. The only difficult part of... Read more

Replaced both fan motors as I did not know which one was making the noise. Read more

Replaced it. Perfect fit. Thanks Read more

• Tray won't turn

Just installed the items purchased from you. Read more

• Won't start

In addition to blown fuse; the fuse holder was melted at one end. Checked the unit to see if any part or wiring that would cause the issue, none was visible. Referred to wiring diagram included inside to identify components, including interlocks. All seemed functional. Bought replacement 20A fuse. Fuse holder no longer available so bought similar unit with 25A rating - little retrofitting. Put unit back together, and it's working so far. Wife is happy. Read more

I received the parts from parts pro within 3 days and everything fit perfectly nd all went well Thanks Parts Pro Wayne Mazur Joliet Il Read more

Replaced magnatron and wire-vltg. First magnatron I ordered came in had damaged frame and tip I decided to install it any way to see if it worked, unfortunately it didn't. I called appliance parts pros and explained what the problem was, the women was very nice and accommodating she sent one out the very next day. I installed the new one and it worked perfectly. It saved me over $400 to replace this particular microwave. I was very happy with the experience of using appliance parts pros. Read more

Tenants in my rental property broke the turntable support hub then tried to fix it with Scotch Tape (bad idea!). Found your site after a quick part search. Found the item in your catalogue effortlessly, ordered the part and it came in a day or two. Ordered a new stirrer window as well . Microwave unit works just fine. I know where to come the next time I need parts! Read more

• Tray won't turn

We located the part from the online diagram for our model. Removed it from the built in cabinet and we replaced it. Read more

Removed microwave from the built in cabinet (probably the hardest part) and took off top cover (screws on side and back). Had previously blown the power fuse 2 times in this microwave, so I checked the fuse first using an ohmmeter. This time fuse was good. Traced the power wires around to top side of microwave and saw the overheat "therm" switch. I believe the therm is installed there as a safety feature to open the power circuit to the microwave in case something was to overheat for any... Read more