Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces cracked, broken, or shattered inner glass window on your oven door. Installs between door panels to restore visibility and heat retention.
Ordered the replacement glass and it arrived when expected and in good order. I had already called upon a few videos including one from AppliancePartsPros for guidance and all of them gave me confidence that this repair wasn't going to be akin to Rocket Surgery. Because this was a double wall oven and the upper door was the broken one, managing it out of the oven was a bit awkward so a body booster (step ladder) helps to improve leverage, angle of attack and weight management. The door does... Read more
Fix F2 or F34 error codes and inaccurate oven temperatures with this temperature sensor assembly. Moderate DIY repair, 30-60 minutes install time.
Easy peasy. We did the repair on a 9-year-old GE wall oven. Read more
The Fan Blower is an OEM part for GE ranges and wall ovens. This part helps to circulate air within the oven cavity. The fan blower ensures that heat is evenly distributed during cooking, contributing to consistent cooking results, and prevents the electronic components from overheating, which could lead to malfunctions or reduced lifespan of the appliance.
Causes of damage to the Fan Blower can include accumulation of debris and grease, which can obstruct the fan and strain the motor, and mechanical wear over time that affects the fan's efficiency.
Symptoms of a bad Fan Blower in a range include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I had to take the top panels off and two back panels off. Took off about thirty screws. It was very dirty and dusty inside so I took the lower panels off as well to clean and vacuum it. The hardest part was getting the double oven out of the cabinet. Overall it was very doable. Read more
This is a cooling fan sensor board that monitors and controls the operation of the cooling fan in a range or oven. It helps regulate internal temperatures by signaling the fan to run during and after cooking to protect electronic components from overheating. Replace this board if the cooling fan does not turn on, runs continuously, or if you receive error codes related to the cooling fan or oven temperature regulation.
You will need a Philips screwdriver, nut driver, and star drivers for this repair. Cordless drill recommended. TURN OFF THE CIRCUIT BREAKER BEFORE STARTING!!! You'll need to disassemble the cord cap before pulling the unit. Take a picture to remember which wires are connected to which terminals. Placed a blanket on the floor for protection and mobility. Removed cooking racks and both doors, then pulled the oven, which is the hardest part to do alone. It's a heavy unit. Once on the blanket I... Read more
The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking. Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age. Symptoms of an inadequate probe thermistor include:
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I looked diligently for this probe for many months and to no avail. So desperate to find it , I Goggled and found this provider for the probe. I was amazed at the timing of the receipt of the item. I received an email within hours that it had been shipped the same day and arrived at my home within less than 48 hours! The price was great and the item was easy to locate on the site.. Thank you for your attention and customer service. I will use these folks again! Read more
This is the lower cooling fan motor assembly that circulates air around the oven cavity to prevent overheating of surrounding cabinetry and internal electronic components. It typically runs during and after cooking cycles to dissipate heat. Replace this fan motor if you hear unusual noises from below the oven, if the oven shuts off due to overheating, or if the fan fails to turn on during operation.
The first attempt was to replace the sensor board on the lower cooling fan motor. That didn’t fix the problem. Next, I replaced the lower cooling fan. The oven is working correctly for now. Time will tell. The repair is fairly simple. 1. Pulled oven out of wall onto a platform that I built to be the same height as the bottom of the oven. 2. Took off the bottom back cover as well as the middle cover. I also had to take off a couple of pieces on the left side where the fan is. 3.... Read more
The Cooling Fan Sensor Board is an OEM component for GE ovens and ranges. It is an electronic module connected to the main control board that monitors internal temperatures. An onboard thermistor sensor in the board regulates the convection fan relay and fan motor speed based on heating demands during the bake and broil functions.
Causes of a failed Cooling Fan Sensor Board can include moisture damage from spills or steam, faulty soldering connections, or manufacturing defects over time. Electronic components are also susceptible to normal wear from frequent heating cycles.
Symptoms of a bad board fan sensor include:
It is also compatible with Hotpoint, RCA, and KitchenAid wall ovens and range models using the same electronic control system.
Halogen bulb illuminates your oven cavity so you can monitor cooking without opening the door. Replace when dim or burnt out. Verify fit with your model.
In my case everything is simple. The important thing was my order was received and my notifications kept me abreast until the delivery. Would not hesitate do deal with this company again in the future. Great professional service. Read more
Seals oven door to prevent heat loss and ensure even cooking. Replace if you notice excessive heat escaping, uneven baking, or visible damage. Confirm fit by model number.
Replacement inner door window glass for wall ovens. Restores clear viewing and heat containment when original glass is cracked, shattered, or clouded.
Incredibly simple. There were a few videos on-line but not for our oven. So I just went at it from the back side incrementally removing screws and panels to get to the glass. The only misstep was removing the 4 screws for the hinges which didn’t have to come off. Hardest part was cleaning up the shattered glass. The metal frame that holds both pieces of inner glass has a couple of tabs that need bent out with pliers to get the new glass in, then reversed to retain it. Read more
This cooling fan circulates air through the oven's control compartment and vent path to keep electronics and surrounding surfaces at safe temperatures during and after cooking. Replacing a failing fan helps prevent overheating, shutdowns, and error messages. What it does:
Replaced cooling fan motor Read more
Oven not heating or baking unevenly? This hidden bake element kit restores proper heating. Includes element, bracket, and wiring for complete repair.
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
Fix an oven door that won't open or close properly. This latch assembly includes the oven light switch and secures your oven door during operation.
Replaced part that plastic switch was a part of. Read more
The GE Board Machine Control is an OEM part for GE ovens. It directs circuit-based electrical processes system-wide.
Symptoms of a bad control board include:
Causes may involve failures in circuitry or connectors after many years of powering range systems. Damage from liquid or impact accidents could also render the board inoperative.
This OEM GE part is also compatible with Hotpoint, RCA, and selected Kenmore models.
Fixes oven not heating after self-clean cycle. This thermal safety switch cuts power when temperatures get too high. Simple diagnosis with continuity test.
Replace TCO Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.