Qt Padding I Panel Parts

So I look up on the internet and search for Frigidaire then your ads comes up: AppliancePartsPros.com. Search was easy, put the model number, enter, then the picture comes up & question ask: where do you think the missing/ broken parts that what you need the location at. Very easy! Then I ordered the parts and I got it in 2 days!.. Wow..! After I put it on, my Fridge look like brand new. Thanks AppliancePartsPros..! Read more

My 9-year-old GE washer, in which I replaced the motor two years ago, developed an extremely loud roaring sound during the spin cycle. After reviewing stories here to pinpoint the problem, I replaced the tub bearing, mode shifter, and tub seal. I also installed a new tub nut, split washer, and belt. This repair involves taking the washer apart in order to get at the tub bearing and mode shifter, which are inconveniently located in the very center of the machine. I bagged labeled all the... Read more

Removed 2 screws from mullion strip heater and slid it up off the tabs at top and bottom. Unhooked the plug and removed it. Verified proper mullion heater and then plugged wiring connection back together, positioned slide clips back in line and slid mullion down onto the clips. Tucked the wiring back into opening positioned cover back in place and reiinstalled the 2 screws. It took about 10 minutes for the entire job. the 2nd problem was a noisy evaporator motor and is a more intense repair... Read more

Just enter the appliance model and the all the parts are pictured! Really easy! Read more

First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went... Read more

We turned off the circuit breaker. We then removed the light cover and then the control panel. We disconnected the Keyboard, Utah, plugged in the new one and turned the breaker on to see if everything worked. We realized that we did not need a new jazz board so that is being returned. The old Keyboard was removed, the new one attached and all the parts were put back. The frig works fine now at the recommended settings of zero and 38F. Read more

I located the web site via the internet and contacted the 1-800 number. The service rep was incredibly helpful and personable. After providing her with the model number and parts needed,the process could not have been easier. My replacement parts arrived the next day a perfect match. I highly recommend using this service, first class all the way. Read more

Ordered a new one from Appliance Parts Pros. Read more

The easiest repair I've ever done. I originally thought (after watching some youtube tutorials) I would need to replace the spring on the flap, but it is not accessible on our Samsung model. Undid the two screws holding the flap to the fridge door, pop it up off the other supports, and un-clip it from the power cord. Put the new flap on the same way and all done! Delivery of the part was crazy fast too! Read more

I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick Read more

Looked at new part and realized there were only 2 screws that held the flap onto the door. Removed 2 caps off of screws with small knife and saved them. Removed 2 screws and the flap fell off into my hands. Disconnected wire harness. Connected wire harness for new flap and carefully pushed harness back into recess in door. Put screws back with caps. Closed the door to test and another wonderful job completed by homeowner! Read more

Removed top hinge screws. unplugged connection. removed bottom hinge. Plug in connection and install srews into hinges Read more

Reverse engineered. Read more

Replacing the circulation pump and control panel were straight forward. Additionally, watching your videos on replacing the items were beneficial. Read more

Started with replacing hinges. Had to glue the door hinge to refrigerator and secured with two small screws. This refrigerator is in a business with about 50 employees. Suspect minion was not working for some time causing the hinges to get broken. . Read more

Ordered front panel and panel control. Also ordered name plate (did not need) front panel already has it. My husband and I had it switched out in approx 10 minutes. Took longer to gather proper tools than it did to do the repair. Looks awesome and original! Read more