Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Refrigerator stopped cooling or compressor won't start? The run capacitor provides electrical charge to keep the compressor motor running smoothly.
I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how... Read more
Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.
Replaced door switch - it took less than 5 minutes - works perfectly Read more
Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, compressed, or door won't stay shut. Confirm fit by model number.
We watched a "youtube" video on how to fix a fridge door seal and even though this particular model fridge was not the same...it helped to see how to fix it. It took me 20 minutes to remove and replace the new door seal. The part ordered was ordered and delivered next day which was great!! Read more
Refrigerator stopped cooling or compressor won't start? This run capacitor provides the electrical boost needed to start the compressor motor. Easy DIY fix.
Thank you to everyone who entered comments, especially about the "Clicking" sounds when it was trying to turn on the compressor. I did not notice them at first, but then heard them and was confident that one of these parts (or both) had a problem. In my case, I have custom cabinets around the sides of the refrigerator and hardwood floors in the kitchen so I put down some cardboard when the rollers would need to go at an angle due to a center island in the way. (I would rather do this myself... Read more
Top door hinge thimble bearing supports the upper refrigerator hinge for smooth door operation. Replace if cracked, worn, or causing popping noises.
I replaced the door cams and the thimble bearing. Read more
Refrigerator not cooling but freezer works? The evaporator fan motor circulates cold air to both compartments. DIY-friendly repair, typically 10-20 minutes.
I google the problem. So thankful I found your site. My husband is not handy at all. Your video made the process very manageable. Ordering process is a breeze. I chatted with customer service before ordering and everything went smoothly. I'm telling all my friends about your company. Read more
Zinc door stop bracket mounts to the bottom of your refrigerator door to prevent over-opening. Replaces broken or missing brackets that no longer limit door swing.
Replaced the complete door assembly. Read more
Refrigerator not making ice? This ice maker assembly automatically fills, freezes, and ejects ice cubes into your bin. Moderately easy DIY repair.
It works great and I finally have ICE and Thank You very much and it's the right part THANK YOU ???? I FINALLY HAVE ICE ?? Read more
Refrigerator not cooling but freezer works? A failed condenser fan motor prevents heat from escaping. DIY repair takes 10-20 minutes with basic tools.
Removed the back cover to access the fan area. Clean the area with brush and vac first. Unplugged the Refrigerator. Used a socket set with 1/4" socket. Had an extended and a standard socket. Removed the condensate plastic drain from the bottom of the refrigerator to have more access to the fan. Unplugged the fan motor. Removed the two screws holding the fan in place. Removed the fan unit from the condenser side of the bracket. Place new fan on the fan and installed exactly the way I removed the... Read more
Replacement drawer track guide for refrigerator shelves. Installs on shelf assembly to support sliding drawers. Order when track is cracked or broken.
After sliding out the old shelf I removed the middle track from the old shelf & installed it with the new left side track on the new shelf. They basically click in & out. Slid the new shelf assembly in & put meat drawer in place. Read more
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Replacement door bin for refrigerators. Mounts inside the refrigerator door to hold drinks, condiments, and snacks. Replaces cracked or broken bins.
My tenant actually put all of the parts on. Only took a few minutes with a screwdriver. Very easy to install. Read more
Replacement track that supports and guides refrigerator drawers or shelves for smooth sliding. Needed when original track is broken, cracked, or worn.
I installed the new guides on shelf number two, which then became our shelf number one and one went into the empty two place. All is well now. Read more
Mounting screw for refrigerator ice maker assembly. Secures components to maintain structural integrity. Replace if lost, stripped, or corroded.
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more
Fridge not cooling but freezer works? A worn evaporator fan blade prevents cold air circulation. Easy 15-minute DIY fix with our video guide.
I read some diagnostic suggestions provided by Appliance Parts Pros and determined fan needed replacing. I got the fan in two days! I used regular shipping and APP delivered on time. My story is that I live in the country and no one returned my calls for repair - so I figured I could get this done. I watched the online video on APP website. Opened up back of freezer after removing ice making and cleaning up ice buildup, I installed the new fan motor. It was easy and my fridge is now cooling... Read more