Woc54ecoaw02 Parts

• Won't start
• Element will not heat
• Little to no heat when baking

I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the... Read more

While cleaning the microwave, I accidentally dislodged the porcelain bracket. It shattered when it fell to the floor. I inserted the tab of the replacement bracket into the punched opening at a right angle, then rotated it to lock it in. The fix was simple and only took seconds to complete. Read more

This was an incredibly easy fix. Took 15 minutes max. Unscrewed the innermost door panel and removed the bracket that held the old glass in. Set the new glass in place, put the bracket back, and put the put panel/glass back and screwed it back in. Read more

Touch up paint Read more

I'm a 56 year old divorced woman. I started doing these kinds of repairs to save some money and honestly, to see if I could. So yes, if I can do it, it's not that tough to do. My microwave is built in above the stove - getting it down and back up was the hardest part of the job. An extra pair of strong hands really helps-for anybody, not just a 56 year old woman. The actual repair was pretty easy. Most likely problem was pretty obvious after a little research. Easy to take off cover, get... Read more

Replaced It With New One Read more

Replaced Inverter and two control boards but the magnetron was the real problem. Had a hold burned through the element. Read more

Bought a replacement gasket. Read more

I replaced the bake element in the bottom of the unit. Read more

I ordered a new one Read more

I researched on the net, ordered the part, it arrived the next day. Took about 45 minutes to replace. Fairly easy fix. Read more

I removed the Shaft by just pulling up on it. I noticed the flat sided hole on the bottom of the Shaft was damaged and a small piece of it was missing. By using a mirror and a pair of tweezers, I was able to remove the small broken off piece of plastic from the hole in the middle of the bottom of the oven. The Shaft still would not turn the plate because of the damage. I ordered the new part and installed it, and everything now works fine. I decided to replace the Ring as well because the... Read more

Replaced the thermst-fix and the thermal fuse oven now works great Read more

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

We ordered the part and one extra screw(which we didn't end up using). If possible take door off your oven for easy access and have lighting source to see well. Taking part out was easy. Putting back in was more difficult because you have to match up two layers of parts in our oven. The broiler coil and the broiler shield above it. We used small craft clothes pins to keep wires from going behind the built in oven. We used a small diameter screw driver to match up holes before putting... Read more

• Tray won't turn

I removed the Shaft by just pulling up on it. I noticed the flat sided hole on the bottom of the Shaft was damaged and a small piece of it was missing. By using a mirror and a pair of tweezers, I was able to remove the small broken off piece of plastic from the hole in the middle of the bottom of the oven. The Shaft still would not turn the plate because of the damage. I ordered the new part and installed it, and everything now works fine. I decided to replace the Ring as well because the... Read more