Parts for Kitchenaid KBFS22EWMS3: 06 - Shelf Parts

Replace your refrigerator water filter every 6 months to ensure clean, fresh-tasting water and ice. Easy twist-on installation. Verify fit with your model.

Replacement glass shelf that sits above the crisper drawers in your refrigerator. Replace if cracked, shattered, broken, or missing for a complete look.

Replacement divider that separates sections inside a refrigerator bin or drawer to keep contents organized. Restores proper fit if your original is cracked, broken, or missing.

This is a door handle designed for the exterior of the refrigerator, providing a grip for opening and closing the door. It attaches to the door panel via mounting brackets or screws. Replace this handle if it is cracked, loose, or broken off, making it difficult to open the refrigerator door properly.

Replacement door frame trim that covers the door opening edge. Install when original trim is cracked, chipped, scratched, or missing to restore appearance.

White plastic center support brace for 30-inch refrigerator crisper shelves. Replaces cracked, broken, or missing braces to prevent glass sagging.

Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.

Freezer compartment divider that separates storage sections in your refrigerator. Replace if cracked, broken, or missing to restore proper organization.

Plastic divider that organizes items in refrigerator storage baskets. Snaps into basket assembly. Replace if cracked, broken, or missing clips prevent secure attachment.

Housing cover for refrigerators. Protects internal components and provides structural support. Replace if cracked, broken, or missing for proper fit.

Replacement glass shelf for your refrigerator. Restores storage space when original is cracked, broken, or missing. Easy-to-clean surface keeps items organized.

This is a sliding control piece used to adjust the humidity level inside a refrigerator crisper drawer. It works by opening or closing a vent to regulate airflow and moisture retention for stored fruits and vegetables. Replace this slide if it is cracked, broken, or no longer stays in position, which can cause produce to wilt or accumulate excess moisture.

Replacement screw for securing brackets, panels, trim, and internal assemblies. Needed when fasteners are missing, stripped, or rusted to restore stability.

Replacement slide rail for refrigerator pantry or deli drawers. Installs on drawer side to enable smooth gliding. Needed when rail is bent, broken, or cracked.

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

This kit includes end caps that attach to the ends of the drawer slide rails inside the refrigerator. They provide a finished appearance and help keep the slide rails properly secured in their mounting tracks. Replace these end caps if they are cracked, broken, or missing, which can cause drawers to slide unevenly or come off track.

This kit includes end caps that attach to the ends of the drawer slide rails inside the refrigerator. They provide a finished appearance and help keep the slide rails properly secured in their mounting tracks. Replace these end caps if they are cracked, broken, or missing, which can cause drawers to slide unevenly or come off track.

Replacement crisper pan for bottom-mount refrigerators. Stores fruits and vegetables in the fresh food compartment. Replace if cracked, broken, or missing.

Support brace that stabilizes the crisper drawer shelf in your refrigerator's fresh food section. Replace if cracked, broken, or missing to keep drawers aligned.

Replaces the front-facing trim piece that secures and finishes your refrigerator shelf edge. Ideal for worn, cracked, or missing trim pieces.

Replacement crisper shelf frame for refrigerators. Supports glass and organizes crisper drawers. Replace if cracked, broken, or sagging. Glass not included.

Replacement glass shelf that sits above the crisper drawers in your refrigerator. Replace if cracked, shattered, broken, or missing for a complete look.

Replace a cracked or broken shelf support ladder in your refrigerator. This ladder stabilizes shelf rails and prevents sagging. Easy DIY installation.

Replacement shelf support ladder that holds and stabilizes refrigerator shelves and bin tracks. Needed when original is cracked, broken, or missing.

Mounting screw for refrigerator interior components and panels. Replace if stripped, missing, or damaged during service to secure parts properly.

Size: 8 x 1-1/4 inch.

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

• Fastens covers, trims, brackets, and internal parts to the cabinet/frame
• Used wherever a #8-18 x 5/8 screw is specified
• Replace if the original is missing, corroded, stripped, or will not tighten
• Symptoms: loose or rattling panels, gaps, or hardware that backs out

• Disconnect power; shut off gas/water before servicing
• Match thread and length; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly—do not overtighten
• Inspect and replace damaged clips or tabs before securing

Humidity control slide for refrigerator crisper drawers. Replace this plastic slide if the lever tab has snapped off, cracked, or broken during use.

Replacement support rod for refrigerator shelves and components. Secures and aligns parts that shift or sag. Order when your rod is bent, broken, or missing.

Replacement utility pan for refrigerator storage compartments. Restores organization when original is cracked, broken, stained, or missing.

Control knob broken, cracked, or won't turn? This replacement knob restores precise temperature and setting adjustments. Clips into place in minutes.

Clear plastic lid that covers the pantry drawer in your refrigerator. Replace if cracked, split, or broken. Snaps into place over hinge pins in minutes.

This part is 28-3/16 inches in length. If  your original part was 30-1/2 inches in length you will need to order W10827015.

Lower freezer basket organizes frozen foods in the bottom freezer compartment. Replace if cracked, broken, or missing to keep items contained and accessible.

Refrigerator freezer drawer glide gear that attaches to the rear shaft. Replace if broken, cracked, or missing tabs cause your basket to lean or fall off track.

This is a small spur gear used in the drawer glide assembly, typically on the left side of a refrigerator or freezer drawer. It meshes with the drawer track mechanism to allow smooth opening and closing. Replace this gear if the drawer is difficult to slide, feels rough or catches when pulled out, or if the original gear teeth are worn or broken.

This replacement agitator shaft restores the connection between the washer transmission and agitator so laundry moves properly during the cycle. Replaces a worn or damaged shaft to help eliminate agitation failure and restore normal washing action. What it does:

• Transfers rotational force from the transmission to the agitator so clothes are moved and cleaned
• Commonly replaced when the agitator refuses to move, spins freely, or washing action is inconsistent
• Can address grinding or knocking noises coming from the transmission/agitator area
• Works as a direct-fit service part when matched to the correct washer model

• Disconnect power and water before beginning any repair
• Follow the washer's service manual or OEM exploded diagram for removal and installation steps
• Inspect surrounding components (agitator, transmission seals, fasteners) and replace if worn

Left-side gear mount bracket for bottom-mount refrigerators. Secures gear assembly in place. Replace if cracked, broken, or damaged to restore stability.

Right-side gear mount bracket for refrigerators. Secures gear assembly in place. Replace if cracked, broken, or mounting tabs are damaged or missing.

Right-side crisper cover support mounts to the inner wall and holds up the crisper cover and glass. Replace if cracked, broken, or missing to restore level.

Left-hand crisper support mounts inside your refrigerator to hold the crisper shelf and guide the drawer. Replace when cracked, broken, or worn for stability.

Replace a cracked, broken, or missing refrigerator glass shelf to restore flat storage space in the fresh-food compartment. Easy to install.

Decorative trim panel that covers and protects the appliance edge. Replace if your original trim is cracked, broken, or missing to restore appearance.

This hook supports and secures the rear of refrigerator shelves to the back wall of the compartment. Located on the refrigerator's back wall, replace it when shelves sag, won't stay level, or fall out of position.

Center support rail that guides and stabilizes crisper drawers as they slide. Replace if cracked, broken, or missing tabs prevent smooth drawer operation.

Replacement crisper shelf frame for refrigerators. Supports glass and organizes crisper drawers. Replace if cracked, broken, or sagging. Glass not included.