Parts for Kitchenaid KRMF706EBS01: 08 - Shelf Parts

Tempered glass shelf for bottom-mount refrigerators. Installs on shelf supports to provide sturdy storage surface. Replace when cracked, chipped, or broken.

Replacement crisper pan for your refrigerator. Slides into factory rails beneath the crisper cover to organize and store fresh produce. Ideal for broken pans.

Replace a cracked, chipped, or missing flat glass shelf in your refrigerator. Restores a stable, easy-to-clean storage surface for food and containers.

Internal shelf frame for refrigerator fresh food compartment. Replace if cracked, broken, or damaged. Provides structural support for adjustable shelves.

Color: Black Stainless

Refrigerator door panel in black stainless finish. Installs on the exterior front door. Replace when cracked, dented, scratched, or discolored.

Replace your refrigerator's freezer door gasket to restore proper seal and prevent cold air loss. Ensures energy efficiency and food freshness. Verify fit with your model number before ordering.

Glass shelf for refrigerator interior storage. Replaces cracked, chipped, or broken shelves. Installs on existing shelf frame brackets inside fridge.

Note: Right Hand

Refrigerator drawer support rail provides guidance and structure for smooth drawer operation. Replace if cracked, bent, or worn from repeated use.

This drum support roller replaces a worn or noisy dryer roller that helps the drum turn smoothly. Restores quiet, even drum rotation for improved drying performance and reduced wear on the drive system. What it does:

• Supports the dryer drum so it spins evenly during operation
• Reduces vibration and noise caused by worn or seized rollers
• Helps prevent premature wear on the belt and drive components
• Common symptom: loud rumbling, squeaking, or visible drum wobble during spin

• Disconnect power to the appliance before any service
• Replace worn or damaged rollers in matched pairs when recommended by the OEM
• Inspect the shaft, bearing surface, and belt for wear and replace if needed

Left-hand drawer slide for bottom-mount refrigerator drawers. Replaces cracked, broken, or worn slides that prevent smooth drawer operation.

This right-side slide is the OEM replacement part that supports and guides a drawer or rack for smooth, stable opening and closing. Restores proper alignment and travel for the right side of the drawer assembly. What it does:

• Guides and supports the drawer/rack along the right side for controlled movement
• Prevents sagging or misalignment that causes rubbing or uneven travel
• Helps eliminate sticking, catching, or noisy operation when opening or closing
• Works as the mating slide that aligns with the left-side slide and drawer hardware

• Disconnect power to the appliance and remove the drawer/rack before starting work
• Remove any mounting screws or clips holding the old slide and slide the old part out
• Align the replacement slide, then fasten or snap it into place using existing hardware
• Inspect mating parts (left slide, screws, clips) and replace any worn components for best results

Note: This part is one screw, order quantity needed.

Door shelf ladder support for bottom-mount refrigerators. Replaces broken or cracked ladder brackets that secure door bins. Installs inside refrigerator door.

Secures panels, hoses, or wiring to your refrigerator chassis. Replace this small retainer clip if it's cracked, broken, or missing to prevent rattles.

Replacement utility pan that collects water beneath your refrigerator. Installs under the appliance to protect flooring from drips and leaks.

Plastic support ladder that mounts inside your refrigerator compartment to hold shelves in place. Replace if cracked, broken, or missing fasteners.

Replacement shelf divider that installs on refrigerator shelves or bins to organize items and prevent shifting. Replaces cracked, broken, or missing dividers.

Replace a damaged or corroded cabinet base panel that supports internal components and seals the bottom. Restores proper fit and airflow. Confirm compatibility.

Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.

Refrigerator light won't turn on or off when opening the door? This door light switch controls interior lighting. DIY repair in under 10 minutes.

Fix a refrigerator running too warm or too cold with this temperature sensor thermistor. Tracks compartment temps to maintain proper cooling cycles.

Structural support bracket for bottom-mount refrigerators. Secures internal components in place. Replace if cracked, broken, or missing to restore stability.

Glass shelf for refrigerator interior storage. Replacement for cracked, broken, or shattered shelves. Installs inside main compartment over bins.

Door bin for refrigerators. Mounts on door shelf tracks for flexible storage and organization. Replace if cracked, broken, or missing to restore door storage.

Replace a cracked or broken control console housing cover to restore your refrigerator's finished appearance and protect internal wiring and switches.

Refrigerator cover panel that installs on the exterior or interior of your appliance. Replace if cracked, discolored, broken, or missing.

Replaces broken, cracked, or loose refrigerator door handle. Restores secure grip for safe, easy door opening. Direct replacement for worn factory handle.

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Replace your refrigerator's LED light module when lights flicker, dim, or fail. Restores full interior illumination. Verify fit by model number.

Pantry drawer not cooling or lights not working? This wiring harness connects electrical components for proper temperature control in your refrigerator.

Replace this electronic control board if your refrigerator won't cool, displays error codes, or has non-responsive controls. Moderate DIY repair.

This produce preserver is a small cartridge or packet designed to absorb ethylene gas inside your refrigerator's crisper drawer. By neutralizing ethylene, it helps fruits and vegetables stay fresh longer. Replace it if your produce seems to spoil or wilt faster than expected, even when stored at the correct temperature and humidity settings.

Refrigerator door support bracket that mounts inside the cabinet to stabilize the door hinge. Replace if cracked, broken, or missing for proper alignment.

This door shelf bin cantilever replaces a cracked or worn refrigerator door bin assembly to restore secure storage on the fridge door. It provides a sturdy shelf edge and latch support so door bins stay in place and hold items safely. What it does

• Secures and supports a refrigerator door shelf, preventing the bin from dropping or slipping
• Restores proper bin alignment and latching when original cantilever or shelf edge is broken
• Helps eliminate rattling or misalignment of stored bottles and containers
• Useful when the door bin no longer stays seated or has visible damage

• One door shelf bin cantilever assembly as shown

• High-level replacement; access the door interior by removing items and, if needed, the full door bin per your model's service instructions
• Use basic hand tools; avoid overtightening fasteners to prevent cracking nearby plastic
• Disconnect power only if service requires removing electrical components; otherwise unplugging is not typically necessary for bin swaps
• If damaged mounting clips or screws are present, replace them to ensure a secure fit

Secures and aligns pantry door components for smooth operation and consistent sealing. Replace if door fit is compromised. Confirm compatibility with your model.