Parts for Kitchenaid KRMF706EBS01: 06 - Freezer Door Parts

The Handle is an OEM part for Whirlpool refrigerators. An external component consumers interact with daily, the handle provides access to chilled storage compartments.

Symptoms of a bad handle include:

• Difficulty opening refrigerator doors smoothly
• Loose or detached handle assembly  
• Inability to open refrigerator fully for easy access
• Failure of locking/closing mechanisms

Causes may include normal wear over extended use. Plastic components can weaken from repeated opening/closing of heavily weighted doors.

This quality OEM Whirlpool replacement handle ensures dependable operation for the life of your refrigerator. Sturdy construction and precise fitment guarantee seamless access to food and beverages. This part is also compatible with Maytag, Roper, Amana, Jenn-Air, and select Kenmore models.
 

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This shaft is the replacement rotating shaft used to support and align the appliance drum or tub, restoring smooth rotation and reducing noise from worn or damaged drive components. What it does:

• Provides a stable mounting point for the drum/tub to rotate smoothly
• Transfers rotational motion and helps maintain drum alignment
• Prevents wobble and uneven wear caused by a damaged shaft
• Commonly replaces a worn or noisy shaft that causes grinding, scraping, or rough drum rotation

• Disconnect power to the appliance before starting any repair
• Some disassembly of the cabinet and drum/tub is required
• Inspect related rollers, bearings, seals and fasteners; replace any worn components to prevent repeat failure
• Use appropriate tools and safety gear

The Drawer Guide is an OEM part for Whirlpool refrigerators. It is a component that allows smooth gliding action for refrigerator drawers and bins. 

Symptoms of a bad drawer guide include: 

• Difficulty fully extending drawers and bins  
• Drawers that stick, crackle or bind during opening and closing
• Areas that no longer stay securely in place when fully extended
• Potential pinching hazards from drawers that do not glide effortlessly 

Causes of a bad drawer guide can include normal wear and tear over time compromising smooth functionality. Small debris or food particles can also accumulate and cause guides to bind or fail to smoothly extend.

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator brands.

The Drawer Guide is an OEM part for Whirlpool refrigerators. It is a component that allows smooth gliding action for refrigerator drawers and bins. 

Symptoms of a bad drawer guide include: 

• Difficulty fully extending drawers and bins  
• Drawers that stick, crackle or bind during opening and closing
• Areas that no longer stay securely in place when fully extended
• Potential pinching hazards from drawers that do not glide effortlessly 

Causes of a bad drawer guide can include normal wear and tear over time compromising smooth functionality. Small debris or food particles can also accumulate and cause guides to bind or fail to smoothly extend.

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator brands.

This replacement screw fastens trim, panels and small components to restore secure attachment and reduce rattling or movement. Use when a screw is missing, stripped, or damaged to keep parts aligned and operating quietly. What it does:

• Secures panels, brackets and trim to appliance assemblies
• Prevents vibration, rattling and misalignment caused by missing or damaged fasteners
• Replaces lost or stripped screws that can allow gaps or loose parts
• Helps maintain safe, stable operation by keeping components properly fastened

• Disconnect power (and water if applicable) before accessing interior panels
• Use the proper screwdriver or driver bit to avoid stripping the head
• Align parts before tightening and tighten until snug—do not overtighten
• Replace only with the correct OEM part to ensure proper fit and function

The Freezer Bin is an OEM component specifically designed for Whirlpool side-by-side refrigerators. It provides adjustable storage for various freezer items above the bottom drawers.

Causes of a bad bin include cracks or fractures developing in the plastic material. Long-term very low temperatures can also make plastic brittle and prone to breaking.

Symptoms of a bad bin include:

• Inability to lift or remove the bin intact  
• Items falling through visible cracks or holes
• Difficulty leveling or adjusting bin placement  
• Uneven weight distribution stressing hinges

This OEM Whirlpool replacement bin restores dependable upper freezer storage. Its resilient construction stands up to subzero exposure without compromising. 

Replace yours if any issues are spotted. This part is also compatible with some GE, Crosley, and Kenmore side-by-side refrigerator models. Reliable organization results from an OEM freezer bin replacement when needed.

This retainer clip secures the dishwasher's sump or collection chamber components in place to maintain a sealed, stable connection for reliable wash performance. A worn or missing clip can lead to leaks, vibration, or loose internal parts.

• Holds sump/collection chamber parts securely to prevent movement and leaks
• Helps correct issues like water leaking from the bottom, rattling noises, or a loose sump connection
• Restores proper alignment and sealing of the lower assembly
• Durable design for repeated service access and reassembly

• Disconnect power and turn off water before servicing
• Access is typically from underneath after removing the toe panel or lowering the sump assembly
• Inspect mating tabs and seals; replace any deformed or damaged parts
• Ensure the clip is fully seated and evenly engaged to lock components in place

The Drawer Front is an OEM part for Whirlpool refrigerators. This drawer front panel covers and encloses the refrigerator's freezer and fresh food drawers. 

Causes of a bad Drawer Front include:

• Cracking or chipping of the protective surface  
• Warping or bowing of the panel over temperature fluctuations
• Fading or discoloration from prolonged sunlight exposure

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A threaded screw used to secure appliance components where an 8-16 thread is specified. Provides a straightforward replacement fastener to restore original fit and keep panels, brackets, and internal parts held securely. What it does:

• Fastens panels, brackets, trim, and small assemblies that use an 8-16 threaded fastener.
• Replaces missing, corroded, stripped, or damaged screws to stop rattling, gaps, or loose parts.
• Restores reliable mechanical connection after service or part replacement.
• Compatible where the OEM specifies an 8-16 screw for mounting or securing components.

• Use the correct driver to avoid stripping the head; start threads by hand to prevent cross-threading.
• Tighten until secure but avoid over-tightening to prevent damage to mounting holes or plastic parts.
• If working near electrical components, disconnect power and follow all safety precautions.
• Inspect mating threads and replace if damaged before installing this screw.

The Bracket Fridge is an OEM part for Whirlpool refrigerators. It is a mounting bracket that provides structural support and helps securely attach the refrigerator cabinet to other internal components. The bracket plays an integral role in maintaining optimal alignment and weight distribution throughout the refrigerator frame.

Symptoms of a bad bracket can include cracks, breaks, or loose fasteners that compromise its strength and load-bearing abilities. Over time normal use and heavy items placed inside the fridge can cause stress fractures or fatigue cracks. 

Causes of a bad bracket include:

• Damage due to impact or mishandling of the unit
• Deterioration from long-term vibration stresses 
• Failure of mounting screws or bolts

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bracket is an OEM part specifically designed for Whirlpool refrigerators. It provides structural support and stability for crucial internal refrigerator features such as shelves and bins that hold food. 

Causes of a bad bracket can include cracks or weakened joints from years of use and opening/closing movements, accidental impact damage from overloading shelves, or broken mounting points that no longer securely hold components in place.

Symptoms of a bad bracket include:

• Sagging or drooping shelves that no longer retain their level position    
• Bins and drawers that shift erratically or slide out without support
• Noisy rattling or clanking noises from loose parts moving inside

This replacement OEM bracket from Whirlpool is the exact match for proper installation and full weight-bearing functionality inside the fridge. It is also compatible with refrigerators from Maytag, KitchenAid, Jenn-Air, and Kenmore.

The Freezer Bin is an OEM component specifically designed for Whirlpool side-by-side refrigerators. It provides adjustable storage for various freezer items above the bottom drawers.

Causes of a bad bin include cracks or fractures developing in the plastic material. Long-term very low temperatures can also make plastic brittle and prone to breaking.

Symptoms of a bad bin include:

• Inability to lift or remove the bin intact  
• Items falling through visible cracks or holes
• Difficulty leveling or adjusting bin placement  
• Uneven weight distribution stressing hinges

This OEM Whirlpool replacement bin restores dependable upper freezer storage. Its resilient construction stands up to subzero exposure without compromising. 

Replace yours if any issues are spotted. This part is also compatible with some GE, Crosley, and Kenmore side-by-side refrigerator models. Reliable organization results from an OEM freezer bin replacement when needed.

The Nameplate is an OEM part for Whirlpool appliances. It serves as an identification label, typically displaying the brand name and model number, providing a clean and professional appearance for the appliance.

You should replace this nameplate if it becomes damaged or worn out. Common causes of a bad nameplate include wear and tear from regular cleaning, exposure to moisture or heat that can cause peeling or fading, and accidental impact that can lead to cracks or detachment.

Symptoms of a bad nameplate include:

• Fading or illegible text
• Peeling or detaching from the appliance surface
• Visible cracks or damage
• The nameplatae being completely missing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drawer Roller Axle is an OEM component specifically designed for Whirlpool refrigerators. It facilitates smooth opening and closing of sliding shelves and bins.  

Causes of a faulty roller axle can include normal wear from long-term use that compromises bearings. Corrosion may build after exposure to food debris or moisture.

Symptoms of a bad drawer roller axle include:

• Sliding parts failing to glide effortlessly or becoming stuck  
• Drawers unable to support intended weight loads
• Premature friction causing difficulty accessing bins

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models as well.

This replacement roller supports the refrigerator's upper drawer pan and lets it glide smoothly on its tracks. Replace a worn or broken roller to restore easy, even drawer movement and reduce sticking or grinding noises.

• Supports and guides the upper refrigerator drawer pan as it opens and closes
• Helps keep the drawer aligned and level on its rails
• Replaces a cracked, seized, or missing roller
• Typical symptoms: drawer sticks or drags, tilts on one side, noisy operation, or the pan jumps off the track

• Disconnect power and remove the affected drawer pan before servicing
• Release and remove the damaged roller; retain any screws or clips for reuse
• Install the new roller in the same orientation; transfer/reuse hardware as needed
• Test drawer travel for smooth, level operation before reloading