Parts for Maytag MRT311FFFE01: Shelf Parts

This refrigerator meat pan replaces a broken or missing deli drawer to restore smooth, easy access storage for meats, cheeses, and snacks. Keep items organized while maximizing your refrigerator's usable space and convenience. What it does:

• Provides a dedicated bin for deli/meat items in the fresh food section
• Slides into existing rails for organized, easy access
• Restores function when the original drawer is cracked, warped, or missing
• Common symptoms: drawer broken, hard to open/close, falls off track, or won't stay seated

• 1 meat pan

• Disconnect power before servicing; handle glass and plastic parts with care
• Remove contents and slide the old drawer straight out of the tracks
• Align the new pan with both rails and push in until fully seated
• Let cold plastic warm to room temperature before installation to reduce risk of cracking

The Crisper Pan is an OEM component for Whirlpool refrigerators. Located in the crisper drawer, it collects moisture to prevent stored fruits and vegetables from drying out or wilting.

The crisper pan utilizes a precise design and surface texturing to maintain the optimal humidity level. Its material withstands continuous use without warping or staining over time. Drainage holes allow excess liquids to return to the pan.

Symptoms of a bad crisper pan can include:

• Moisture streaking on drawer surfaces over multiple uses  
• A buildup of pink or white residue from dried-out produce
• Fruits and vegetables show signs of wilting or decay more quickly
• Deformation from cracking, creasing, or impact damage

This OEM part is also compatible with refrigerators from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Kenmore.

The Pan-Crisper is an OEM component specifically designed for Whirlpool refrigerators. Located in the fresh food compartment door, it houses the crisper drawers where vegetables are stored to prolong freshness. Proper pan functioning ensures the drawer glides smoothly and seals shut to regulate humidity levels optimally.

Symptoms of a bad crisper pan include:

• Drawers failing to open or close fully due to warping/deformation  
• Excessive condensation buildup caused by compromised seals
• Drawers sticking or binding during operation  

Causes are commonly cracking or mineral scale accumulation which can warp the plastic over time. Temperature fluctuations also make them brittle and prone to failure.

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Track is an OEM replacement part for Whirlpool refrigerators. It is designed to support and guide the movement of the refrigerator drawer opening and closing. It is responsible for keeping the drawer aligned and preventing it from falling off track or becoming misaligned.

A bad track rail can occur due to wear and tear, physical damage, or improper installation. If you notice symptoms such as a sticking or jamming drawer, difficulty in sliding the drawer in and out smoothly, or a misaligned drawer, it may be time to replace the track rail.

Symptoms of a bad track include:

• Sticking or jamming drawer
• Difficulty in sliding the drawer smoothly
• Misaligned drawer

Restore your refrigerator drawer by replacing the faulty or damaged track with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Right side.

Left side

The Refrigerator Drawer Track is an OEM part for Whirlpool refrigerators. It provides a stable guide for the refrigerator drawers, ensuring they slide in and out smoothly for easy access to stored items.

Causes of a bad drawer track can include normal wear and tear from frequent use, buildup of dirt and debris, or physical damage from overloading the drawers or accidental impact. When the track becomes worn or damaged, it can impede the drawer's functionality.

Symptoms of a bad drawer track include:

• Difficulty opening or closing the refrigerator drawers
• Drawers getting stuck or not sliding smoothly
• Misalignment or falling off the tracks
• Unusual noises when operating the drawers

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tempered glass shelf provides a stable, easy-to-clean surface for organizing refrigerator contents and preventing spills from reaching lower compartments. It restores proper spacing and visibility for stored food. What it does:

• Replaces a cracked, chipped, or missing refrigerator shelf to restore storage surface
• Helps contain spills and keeps items level to prevent tipping or rolling
• Improves visibility and organization inside the fresh-food compartment
• Fits into existing shelf supports for simple repositioning of storage levels

• Handle glass carefully; wear cut-resistant gloves to avoid injury
• Remove food and shelving near install area before replacing the shelf
• Slide into existing shelf supports until fully seated; do not force or bend
• Replace damaged mounting clips or supports before use

The Refrigerator Track is an OEM part for Whirlpool refrigerators. It supports and guides the movement of refrigerator drawers or shelves, ensuring they slide in and out smoothly. The track measures approximately 11 inches in length.

Causes of a bad track can include wear and tear from frequent use, damage from overloading the drawers or shelves, or breakage due to accidental impact. Over time, the track can become misaligned, cracked, or lose its ability to support the drawer properly.

Symptoms of a bad track include:

• Drawers or shelves that do not slide smoothly or get stuck
• Uneven or tilted drawers
• Noise when opening or closing the drawers
• The track appears damaged or broken

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Support (mounting bracket) secures a panel or component to the appliance frame to restore stability and reduce vibration. Replacing a broken or worn support helps stop rattling, misalignment, and loose panels. What it does:

• Secures panels or components to the appliance frame; symptom: loose or sagging panel, visible movement.
• Reduces vibration and noise caused by a failed bracket; symptom: increased rattling during operation.
• Maintains alignment for moving parts or doors; symptom: binding, misalignment, or uneven gaps.
• Replaces cracked, bent, or worn supports to restore original fit and function.

• Disconnect power to the appliance (and shut off gas for gas models) before starting any repair.
• Basic hand tools are typically required; keep original screws and hardware unless new hardware is supplied.
• Follow the appliance owner's manual or service guide for model-specific steps and torque requirements.

A clear glass shelf designed as a direct replacement to restore a fridge's flat storage surface and help contain spills. Provides a sturdy, easy-to-clean shelf for safe, organized food storage. What it does:

• Replaces a cracked, chipped, scratched or missing interior refrigerator shelf
• Provides a flat, stable surface for containers and groceries
• Helps contain spills and makes cleanup easier with smooth, wipeable glass
• Slides or rests into existing shelf supports to restore original shelf configuration

• Remove food and any loose components from the shelf area before installing
• Handle glass carefully and wear gloves to avoid cuts; set into existing tracks or supports until secure
• Do not force into place; verify correct orientation and support engagement
• If shelf is damaged during installation, stop and replace—do not use a compromised glass shelf

This support is a replacement mounting bracket that helps secure internal components and restore proper alignment for reliable operation. Replaces a worn or broken support to reduce movement and rattling. What it does

• Holds and stabilizes internal assemblies or panels to maintain correct positioning.
• Prevents excess movement that can cause noise, rubbing, or misalignment.
• Commonly replaced when support is cracked, bent, or missing hardware.
• Helps restore normal fit and reduce wear on adjacent parts.

• One support (mounting bracket) as shown.

• Disconnect power and, for refrigerators, water supply before servicing to avoid shock or flooding.
• Basic hand tools typically required; follow OEM disassembly order to access mounting location.
• Inspect surrounding fasteners and adjoining parts; replace any damaged hardware for secure fit.

This center crisper track supports and guides the refrigerator's produce drawers. Replacing a cracked or warped track restores smooth sliding and proper alignment so the bins open and close correctly without binding or sagging.

• Provides the center guide and support for the crisper drawers beneath the crisper cover
• Helps keep bins level and aligned for smooth operation
• Replace if the center rail is cracked, loose, or tabs are broken
• Typical symptoms: drawers stick, tilt, fall off the track, or won't close fully

• Disconnect power; remove crisper drawers and any glass shelf/cover as needed
• Note orientation; release tabs or remove fasteners to take out the old track
• Transfer and reuse existing hardware if required
• Seat the new track securely and verify drawer alignment before restoring power

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal