Parts for Frigidaire PRFG2383AF2: Shelves Parts

This replacement tube supplies water to the ice maker/dispenser assembly and restores a sealed, routed water path to prevent leaks and ensure proper filling. It's a direct-fit replacement when the original tube is cracked or damaged. What it does:

• Channels water from the inlet valve to the ice maker or dispenser fill point.
• Prevents leaks and drips caused by cracked, brittle, or pinched tubing.
• Helps restore normal ice production and dispenser flow when the original tube is compromised.
• Works with the refrigerator's existing fittings and clamps when installed correctly.

• One replacement tube.

• Disconnect power and shut off the water supply before starting any repairs.
• Replace only with the exact part number; inspect and reuse or replace clamps and seals as needed.
• Use basic hand tools; avoid kinking the tube during installation to maintain proper flow.
• After installation, restore water and power, then check carefully for leaks and proper fill operation.

This OEM-style refrigerator insulation panel replaces torn, wet, or missing foam behind the cabinet liner to help maintain temperature stability and reduce noise. It restores proper thermal barrier where the original pad has failed. What it does:

• Provides the inner thermal barrier between the cabinet and liner to help reduce heat transfer
• Helps prevent frost or condensation buildup caused by compromised insulation
• Dampens normal operating noise from the compressor and refrigerant lines
• Restores an even internal temperature profile when worn or damaged

• One refrigerator insulation panel

• Disconnect power and empty/remove items before servicing the unit
• Access typically requires removing interior panels or liner—keep fasteners organized
• Replace with like-for-like piece; avoid compressing or tearing the insulation during installation
• If adhesive or clips are used, ensure proper seating so the liner lays flat and seals correctly

This water filter facia is the exterior faceplate that finishes and secures the refrigerator's cartridge-style water filter assembly, restoring a clean appearance and proper filter retention at the dispenser area. What it does:

• Covers and secures the water filter housing, keeping the filter cartridge in place
• Restores a finished look when the original faceplate is cracked, chipped, or discolored
• Helps maintain the correct filter alignment for a proper seal and fit
• Prevents debris from entering the filter compartment and the dispenser area

• One water filter facia/faceplate

• Turn off the refrigerator's water supply before removing or reinstalling the filter or facia
• Remove the filter cartridge per the refrigerator manual to access the facia if required
• Use basic hand tools; avoid forcing clips or tabs to prevent breakage

This user interface is the front control panel assembly that provides the touch buttons and display used to select oven/range functions and show time and temperature. Replacing a faulty interface restores responsive controls and readable display. What it does:

• Registers touch/button inputs so the appliance responds to temperature, timer and function selections
• Shows oven temperature, clock and status messages on the display
• Stops common symptoms like unresponsive buttons, blank or flickering display, or missing function feedback
• Works with the existing control electronics and ribbon/connectors to transmit commands

• Disconnect power to the appliance before starting any work.
• Handle the display and ribbon cable carefully to avoid damage.
• Test the interface and functions after reconnecting power before fully reassembling.

This refrigerator door gasket replaces a worn or damaged seal to help keep cold air in and warm air out, improving temperature stability and reducing moisture buildup around the door. It restores a proper seal for better appliance performance. What it does:

• Forms an airtight seal around the refrigerator door to help maintain consistent internal temperature
• Reduces warm air infiltration that can cause frost, moisture, or increased energy use
• Helps prevent food spoilage and excess condensation near the door
• Common symptoms it addresses: visible gaps, cold air leakage, moisture or frost buildup along the door edge

• One replacement door gasket

• Disconnect power before starting and follow the appliance manufacturer's instructions
• Remove the old gasket and clean the gasket channel before installing the new seal
• Press the new gasket evenly into the door channel; some models require loosening/repositioning screws or warming the gasket for a snug fit
• Check for gaps after installation and adjust as needed for a full seal

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This crisper cover assembly is the glass shelf that sits over the refrigerator crisper drawer, providing a stable surface and helping contain spills so produce stays organized and visible. It restores the original shelf surface and appearance. What it does:

• Provides a sturdy glass shelf above the crisper drawer to hold food and containers.
• Helps contain spills and prevents items from falling into the crisper below.
• Restores a broken, cracked, or missing crisper shelf to safe, usable condition.
• Maintains proper organization and visibility of refrigerated items.

• Unplug the appliance or disconnect power before installing to avoid electrical hazards.
• Handle glass carefully; wear gloves to protect hands from sharp edges if damaged.
• Verify mounting points and slide the cover into place until fully seated; do not force.

This support mounting bracket secures internal components and helps keep assemblies aligned so drawers, panels or controls operate smoothly. A simple replacement that restores proper fit and reduces noise from loose parts. What it does

• Provides a stable mounting point to hold panels, drawers or internal assemblies in position.
• Prevents sagging, misalignment or rubbing that can cause binding or uneven operation.
• Reduces vibration and rattling caused by broken or worn supports.
• Restores part fit and clearance so adjacent components move freely.

• Replace only when the original is damaged, cracked or missing; verify orientation before removing fasteners.
• Use appropriate hand tools; avoid overtightening screws to prevent cracking the plastic.
• Disconnect power or unplug the appliance if working near electrical components or controls.

The Frig Freshness Booster Refill is an OEM part for Frigidaire refrigerators. This refill helps maintain freshness by absorbing and removing odors from the refrigerator.

Causes of needing a new refill include the natural depletion of the absorption material over time through repeated use and odor elimination. Refills are intended to be replaced periodically to ensure optimal freshness performance.

Symptoms of a refill needing replacement include:

• Lost ability to fully absorb odors
• Deterioration or break down of the absorption material
• Excessive build up of odors inside the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Color: Black/natural. Nylon

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

The Filter is an OEM part for Frigidaire refrigerators. This water filter is designed to reduce contaminants and impurities from your refrigerator's water and ice supply, ensuring you have access to clean, fresh-tasting water and ice at all times. The filter targets a wide range of waterborne contaminants, including lead, mercury, chlorine, pesticides, and pharmaceuticals, without removing beneficial fluoride.

Regularly replace your refrigerator's water filter every 6 months to maintain optimal water quality and flow. Prevent clogs for effective filtration.

Symptoms that indicate it's time to replace the FPPWFU01 Filter include:

• Noticeable decrease in water flow from the dispenser
• Unusual taste or odor in the water or ice
• The refrigerator's water filter indicator light turns on
• It has been more than 6 months since the last filter replacement

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This water filter manifold directs and seals the water flow to the refrigerator's filter housing so your dispenser and ice maker receive filtered water. Replaces a damaged or leaking manifold to restore proper water routing and pressure to the filter area. What it does:

• Channels incoming water into the filter housing and back to the dispenser/ice maker
• Provides mounting and a sealed connection point for the cartridge-style filter
• Commonly replaced for leaks, reduced water flow, or when the filter won't seat properly
• Works with the refrigerator's internal water plumbing and filter housing assembly

• One water filter manifold

• Turn off the refrigerator water supply and disconnect power before servicing
• Drain remaining water from lines and wear eye protection to avoid spills
• Inspect O-rings/seals and replace if damaged; hand-tighten fittings and avoid over-torquing

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

The Crisper Pan Roller is an OEM replacement part for Frigidaire side-by-side refrigerators. Located in drawer tracks below crisper bins, these rollers facilitate smooth extension and retraction of crisper pans.

Symptoms of damaged crisper pan rollers include: 

• Difficulty fully withdrawing or pushing in crisper pans  
• Jumpy or uneven movement of pans on drawer slides
• Visible scratches or flattened spots on roller surfaces  
• Creaking or grinding noises emanating from drawer area

Causes relate to repeated weight impacts over years absorbing crisper loads containing vegetables and fruits. Rust accelerates on rollers exposed to humidity fluctuations inside drawers.

This pan roller is compatible with select Electrolux and Kelvinator models as well.

This replacement wiring harness connects the appliance control to its electrical components, restoring reliable electrical connections so controls, motors and heating elements can function as intended. What it does

• Routes and links the control board to switches, sensors, motors and heating elements.
• Restores electrical continuity when a damaged or broken harness causes controls or components to lose power.
• Helps stop intermittent operation or component failures caused by loose, corroded, or damaged wiring.
• Visible damage, burning smell, or melted insulation are common signs this harness needs replacement.

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Take reference photos of connector locations before removing the old harness to ensure correct routing and reconnection.
• Match each connector and secure all plugs until they click; avoid pinching wires when reassembling panels.