Parts for Frigidaire PRFG2383AF2: Fresh Food Doors Parts

The Fresh Food Door Gasket is an OEM replacement part for Frigidaire refrigerators. It creates a seal around the refrigerator door to maintain a consistent temperature by keeping cold air in and warm air out. This helps ensure proper refrigerator conditions and prevents energy loss.

Over time, gaskets can degrade due to wear, exposure to extreme temperatures, or cleaning with harsh chemicals. A damaged or worn gasket may fail to seal properly, affecting the freezer's efficiency and potentially leading to increased energy consumption.

Symptoms of a bad gasket include:

• Frost or ice buildup inside the refrigerator
• Difficulty keeping the refrigerator door fully closed
• Warm air entering the refrigerator, causing temperature fluctuations
• Increased energy bills due to inefficient operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

NOTE: GASKET NOW GRAY, NOT WHITE

The Nameplate is an OEM for Frigidaire appliances. It affixes to the exterior and clearly identifies the brand.

Causes of a damaged nameplate can include normal wear and tear over time outdoors, exposure to cleaning chemicals that breakdown adhesive integrity or accidental damage from impact.

Symptoms of a bad nameplate include:

• Nameplate lifted, peeling or completely removed from surface
• Faded or worn lettering obscuring model identification
• Dirty, stained appearance detracting from product aesthetics

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Stop is an essential OEM replacement part for Frigidaire bottom-mount refrigerators. It functions to securely hold the refrigerator door fully open during loading and unloading of food items. 

Causes of a faulty door stop include cracking or warping due to years of resisting door closure force during access. Friction might also wear down moving lever components over time.

Symptoms of a bad door stop are:

• Refrigerator door unable to safely prop fully open  
• Door slowly closing partially while items are retrieved
• Visible wear marks or loss of lubrication where door pivots

This authentic OEM replacement is compatible for Frigidaire, Electrolux and Kenmore models. 

This door stop is the replacement part that limits door travel and cushions the refrigerator door for smoother closing and reduced impact. It helps restore proper door alignment and prevents the door from hitting the cabinet. What it does:

• Stops or limits door travel to prevent over-opening and cabinet damage
• Cushions door movement to reduce slamming and wear on hinges
• Helps maintain correct door alignment so the seal engages properly
• Commonly used when the door hangs unevenly, slams, or won't stay aligned

• Disconnect power or unplug the appliance if accessing electrical components is required.
• Support the door or remove it before replacing hinge or stop hardware.
• Basic hand tools usually required; keep track of small screws and clips.
• Test door operation and alignment after installation; adjust as needed.

This door handle assembly provides a ready-to-install replacement to restore a secure, easy-grip opening for your refrigerator door. Durable construction replaces a worn or broken handle for reliable daily use. What it does:

• Replaces a cracked, loose, or broken refrigerator door handle to restore safe operation and appearance
• Provides a solid grip for opening and closing the door smoothly
• Matches factory mounting points for proper fit and alignment
• Helps prevent door damage and keeps the seal functioning by ensuring correct door movement

• Disconnect power to the appliance before beginning any repair to avoid injury
• Remove any trim or access panels as needed to access mounting screws; retain fasteners for reassembly
• Hand-tighten screws, then snug—do not overtighten to avoid cracking the handle or trim

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

Replace the worn bearing that supports your refrigerator's ice-dispenser auger. This bearing helps the auger spin smoothly so cubes travel to the chute, restoring steady ice dispensing and reducing grinding or jamming.

• Supports the auger shaft within the ice bin/dispenser assembly
• Enables smooth rotation to move ice toward the chute
• Wear can cause slow or failed dispensing and squealing/grinding noises
• Fixes issues with a cracked, worn, or seized auger support

• Disconnect power and remove the ice bin before servicing
• Separate the bin front/cover and auger assembly; note the bearing's orientation
• Transfer the new bearing and reuse existing screws/retainer if present
• After reassembly, confirm the auger turns freely by hand before restoring power

This tension spring provides the restoring force needed for a moving refrigerator component, helping parts return to their normal position for reliable operation and alignment. It's a simple replacement that restores proper movement and stability. What it does:

• Provides tension to return or hold a component in place during normal operation
• Helps maintain proper alignment and smooth movement of the associated mechanism
• Worn or broken springs can cause improper latching, sagging, or uneven movement
• Replacing a damaged spring often resolves related noise or binding issues

• One replacement spring

• Disconnect power before attempting any repairs to avoid electrical hazards
• Handle springs carefully; they can be under tension and may require basic tools to remove/install
• Replace with the exact part number to ensure fit and function

This internal water hose routes the refrigerator's water supply between internal components so the dispenser and ice maker can receive water. It replaces a worn, cracked, or leaking internal tube to restore steady water flow. What it does:

• Carries cold water from the inlet/valve to internal points like the dispenser or ice maker
• Prevents leaks and water damage when intact and properly seated
• Helps maintain consistent dispenser flow and ice production
• Commonly replaced for visible cracks, kinks, or leaks inside the cabinet

• Disconnect power and shut off the water supply before starting any repair
• Inspect hose connections and routing; replace if pinched or damaged
• Use proper clamps or fittings; avoid overtightening which can damage fittings

This replacement electrical switch controls power to a specific function in your appliance. By opening or closing the circuit, it lets the selected feature turn on and off reliably when you actuate the control.

• Completes or breaks the circuit to start/stop its assigned component
• Restores responsive on/off or selector operation at the control
• Common failure symptoms: feature won't start or won't shut off, intermittent operation, loose/stuck actuator, or heat discoloration on the old switch
• Used in control, console, or door areas depending on model design

• Disconnect appliance from power before servicing
• Access the switch location per your model; remove knob/panel if applicable
• Photograph wire positions and note terminal labels (COM/NO/NC) if present; transfer wires one at a time to the new switch
• Secure mounting, ensure tight connectors, reassemble, restore power, and test operation

This replacement lower door bin restores secure storage on the refrigerator door, giving you a stable shelf for bottles, jars and condiments. It replaces a cracked, broken or missing lower shelf to keep items organized. What it does

• Provides a stable shelf on the bottom section of the refrigerator door for bottles and containers
• Keeps stored items from falling out when the door opens and closes
• Replaces bins with cracks, chips, broken mounting tabs or that no longer stay seated
• Helps restore full door storage capacity and organization

• Remove food and containers from the door before installing the new bin
• Align the bin tabs with the door mounting slots and press into place until fully seated
• Inspect mounting tabs for damage; replace if necessary to ensure a secure fit
• Unplug the appliance or disconnect power before working in confined areas for added safety

This part number contains one (1) screw.

The Door Handle Screw is an OEM part for Frigidaire refrigerators. This screw secures the door handle to the refrigerator door, ensuring a firm and stable grip for opening and closing the door.

Causes of a bad door handle screw can include regular wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or stripping. A faulty screw can lead to a loose or wobbly door handle, making it difficult to operate the refrigerator.

Symptoms of a bad door handle screw include:

• The door handle feeling loose or coming off
• Difficulty in securely tightening the handle
• Visible rust or corrosion on the screw
• Stripped threads on the screw or handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Hinge Pin is an OEM part for Frigidaire refrigerators. It is responsible for supporting the mullion or flapper, which is the vertical strip that divides the refrigerator doors. It provides smooth movement and proper alignment of the mullion, allowing it to pivot easily for access to both compartments while maintaining an airtight seal when closed.

Causes of a bad hinge pin can include wear and tear over time, accidental damage, or improper handling. A damaged or worn-out hinge pin may result in difficulties in opening or closing the mullion.

Symptoms of a bad Hinge Pin include:

• Difficulty in opening or closing the doors
• Excessive play or wobbling of the mullion
• Failure to maintain a proper seal between door
• Unusual noises during use

This OEM Frigidaire part can also be used on select Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore models.

This mullion assembly is the vertical door trim that covers the gap between refrigerator doors and provides a finished appearance while helping maintain a tighter seal. Replacing a cracked or warped mullion restores the look and reduces drafts. What it does

• Covers the vertical gap between doors and provides a finished trim piece.
• Helps maintain an improved door seal and reduces cold-air leakage around the door edge.
• Prevents visible damage or gaps that can allow moisture, frost, or odors into the cabinet.
• Restores proper door alignment appearance when the original mullion is dented, cracked, or warped.

• One mullion assembly.

• Disconnect power to the appliance before removing door panels or working near electrical components.
• Remove any door bins/trim as needed, then unfasten mounting screws or clips holding the mullion and lift out; reverse to install.
• Use care to avoid scratching door surfaces; gently align and seat clips/screws so the trim sits flush.

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This small rubber door bumper cushions and aligns the refrigerator door to reduce slamming and wear. It restores smooth closing and helps keep the door sealed for proper cooling. What it does:

• Absorbs impact when the door closes to prevent hard bangs and protect cabinet surfaces
• Keeps the door properly spaced to help maintain a consistent seal
• Reduces rattling or vibration caused by loose or worn bumpers
• Simple, low-profile part used at door contact points or stops

• One replacement bumper

• Power is off if working near electrical components; follow appliance safety precautions
• Remove the old bumper by pulling it from its mounting hole; press the new bumper firmly into place until seated
• Use gloves to protect your hands; avoid using excessive force or tools that could damage trim
• Replace with the exact OEM part number for proper fit and function

This water connector links sections of the refrigerator's water supply tubing, maintaining a sealed path to the dispenser and ice maker. Replace a cracked or leaking connector to stop drips and restore reliable water flow and ice production.

• Connects sections of internal water tubing between components (inlet valve, filter, door, ice maker)
• Helps maintain a sealed route for proper dispenser and ice maker operation
• Common symptoms: water leaking behind/under the refrigerator, weak/no dispenser flow, ice maker not filling, visible damage at the fitting
• Direct-fit component built to OEM specifications for the intended application

• Unplug the refrigerator and shut off the household water supply before servicing
• Dispense water to relieve line pressure; place a towel to catch residual water
• Cut tubing ends square and fully insert into the connector until seated; tug gently to confirm engagement
• Restore water, check carefully for leaks, and recheck after the first dispense cycle