Statesman Parts

Replacement wire that securely attaches the rear skirt trail shield to your lawn mower deck. Replace if broken, detached, or missing for proper skirt fit.

Torsion spring for lawn tractors and riding mowers. Replaces broken, worn, or missing springs in deck assemblies and mechanical linkages.

Deck won't stay up or is hard to raise? This lift assist spring restores smooth mower deck operation. Quick DIY fix for most lawn tractors.

Extension spring for lawn tractors. Installs on linkage or control mechanisms. Replace if stretched, broken, or missing to restore proper tension.

Extension spring for lawn tractors and riding mowers. Replaces broken, stretched, or missing springs. Essential hardware for proper assembly and operation.

This extension spring is a genuine OEM part sourced directly from the manufacturer for use on lawnmowers. The extension spring is part of the idler pulley system that allows the idler pulley bracket to pivot when turning blades on and off. If the spring is broken or warped, the mower deck will not function properly, and the lawn mower will not function at its best. The deck will not move up and down and may be stuck in one position. If this occurs, the extension spring should be replaced.Make sure the lawnmower has not been used recently. Wear safety gloves when working on the mower. Remove the spark plug and key from the lawnmower. Place the lawnmower on a flat surface. Locate the spring under the deck and use the diagram in the manual to remove the spring. Install the new spring and reverse the process to put the mower back together. Reinstall the spark plug. Start the lawnmower and test the deck movement and blade movement to make sure the spring is installed correctly.This extension spring is a silver metal part that is sold individually. It is designed for use in lawnmowers manufactured by Yard Machines, MTD, Troy-Bilt, Husky, Yard-Man, and MTD.

Extension spring for lawn tractors and walk-behind mowers. Replaces broken, stretched, or missing springs in transmission and control linkages.

Extension spring for lawn tractors and riding mowers. Replace this spring if it's broken, stretched, worn, or missing to restore proper tension.

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

Square tread tire for lawn tractors and riding mowers. Replaces worn, cracked, or damaged tires. Sold individually for front or rear wheel positions.

Replaces worn, cracked, or damaged 8-inch wheels on walk-behind lawn mowers. Restores smooth rolling and maneuverability for easier operation.

This genuine replacement part is a MTD wheel assembly for lawn mowers and trimmers. It replaces the rear wheels on these tools. This wheel assembly attaches to the bottom of the mower, and allows for smooth rolling, even on uneven ground. Over time, the wheels on a lawn mower or lawn tractor can wear out or become damaged. This can reduce traction or affect the alignment of the mower.Replacing the wheel is simple, but please follow these important safety precautions when working with this part: Shut off the engine of the mower. Allow the engine to become cool before installing this part. Disconnect the spark plug to prevent the mower from accidentally starting. For installation information, please refer to the original product manual. Please note: a socket wrench is required for installation of this part.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Ryobi, and more lawn mowers and trimmers. Please note: original part numbers 1828027, 1917592, 753-04211, and GW-1917592 are now obsolete, and manufacturer has replaced the original part numbers with this part.

Flat washer for lawn mowers and tractors. Replace if missing, corroded, or damaged during maintenance. Ensures secure fastening of components.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

Flat washer flange for lawn mowers, snow throwers, tillers, and edgers. Replace when washer is missing, damaged, or worn to ensure proper assembly.

Flat washer for lawn mowers, tractors, tillers, and snow blowers. Replace if worn, damaged, or missing to ensure proper fastener spacing and tension.