Tiller Carburetor

A carburetor is responsible for combining fuel and air into the right combustible mixture. When it is malfunctioning, there are several warning signs to look out for. These include poor fuel economy, rough idle, flooding, and engine misfire. Installing a brand-new carburetor can help. A carburetor replacement is easy and starts with turning off the lawnmower. Open its air filter cover and use a screwdriver to remove the air filter base. Once detached, disconnect the throttle cable and fuel line. Place the new carburetor and connect the fuel line and the throttle cable. Put back the air filter base. This is a brand-new and original MTD carburetor. It is compatible with tillers, leaf blowers, and string trimmers from MTD, Bolens, Craftsman, Troy-Bilt, Yard-Man, and Yard Machines. This carburetor is fully assembled and sold individually. Additional carburetor gaskets are sold separately.

This carburetor is a device for supplying a two-cycle engine with a mixture of air and fuel. This part comes pre-assembled and has a plastic choke lever along with a metal body. The primary purpose of a carburetor is to mix the right amount of fuel with air so that the engine runs properly. If enough fuel is not mixed with the air, the engine runs lean and can either stop running or gets damaged. On the other hand, if too much fuel is mixed with air, the engine runs rich, and it either floods, runs poorly, runs very smoky, or wastes fuel. The carburetor is in charge of getting the right mixture. If the carburetor is clogged, the engine will not get enough fuel. It may not start or may run rough. The procedure to replace the carburetor is quick and easy, taking only around 15 minutes, but it is recommended to work in a ventilated area. This carburetor works with outdoor power tools like the trimmer, leaf blower, and tiller. It is compatible with specific products from popular brands like Craftsman, MTD, Murray, and Troy-Bilt. It is sold individually and is supplied directly from the original equipment manufacturer.

This is a replacement carburetor assembly that is used on small engines found in many types of lawn and garden equipment. The carburetor is responsible for ensuring there is a proper fuel-air mix before the fuel is sent to the engine. This assembly is made from metal and features a plastic lever. The carburetors found in engines are durable, but this does not mean that they will not wear down over time. Eventually, they may need to be replaced. If they have become damaged and are no longer functioning properly, it could cause issues with the performance of the engine. They will need to be replaced. This genuine OEM replacement carburetor is sold individually. Buyers will need to purchase gaskets separately. The part works for wood chippers, tillers, leaf blowers, and other small engines. Brands with models compatible with the carburetor include Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man. When purchasing, buyers should make sure that this carburetor is correct for their make and model of engine.

This carburetor assembly can be used as a replacement part for the small engine of a string trimmer, a chainsaw, or an edger. The carburetor assembly contains a replacement carburetor and the components required to facilitate the replacement and installation of the carburetor. The purpose of the carburetor is to create a mixture of the fuel and air that the engine takes in and channel it through the network of valves to the spark plugs, which ignite and power up the engine.A carburetor might have to be replaced if it is damaged to the point of exhibiting the following symptoms, among others: black smoke pluming from the exhaust, reduced fuel economy, misfires and false starts of the engine, and oil leakages stemming directly from the carburetor. If this is the case, this carburetor assembly should be ordered as a replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This carburetor assembly is compatible with the following brands: MTD, Troy-Bilt, Ryobi, and Yard Man.

This Craftsman carburetor is the component that mixes together gas and air before the mixture can reach the engine to power a lawn trimmer. If there isn’t enough fuel in the mix, it can damage the engine or cause the trimmer not to run. Too much fuel can create excess smoke, poor performance, or can prevent the engine from starting. Testing whether a carburetor needs to be replaced can be done by adding a small amount of fuel to the component after removing the air filter. If the engine begins to run but quickly sputters out, this is an indication that the carburetor has a problem. A replacement carburetor can be installed using a wrench, pliers, and safety glasses. This trimmer component is genuine OEM and comes directly from the manufacturer. It is compatible for use with lawn trimmers by Craftsman and MTD. This is an individual item that comes with the carburetor assembly and the carburetor gasket. Pliers and screwdrivers may be needed to complete this replacement or repair.

This is a replacement carburetor assembly that can be used for small engines, such as those found on lawn and garden equipment. The carburetor is where the air and fuel mix before going into the engine. It ensures that there is an accurate ratio of fuel and air, so the engine can start and run efficiently. While carburetors can last a long time, there is always a chance that they will need to be replaced. Normal wear and tear, damage from accidents, chemicals, or corrosion could mean a replacement is necessary. If the owner finds that their engine is sputtering, misfiring, not performing properly, or has trouble starting, the carburetor could have failed. The authentic OEM replacement carburetor features the metal body and the rubber primer bulb. It does not come with gaskets. The carburetor could be used for tillers, trimmers, and edgers. Compatible brands include Cub Cadet, MTD, Yard-Man, and Craftsman. Buyers must make sure they are buying the correct carburetor kit for their engine.

The choke shutter is a trimmer part that restricts the amount of air that flows into the engine. The choke shutter rests inside the carburetor, and is designed to help with the mixture of air and fuel that causes the combustion that starts the engine.If the choke shutter is not opening or closing properly, then the engine will not be able to start. The carburetor's temperature allows the engine to run, and in order to control the temperature, you will need a working choke valve. To install a new choke shutter, start by opening the carburetor inside of the trimmer's engine. This part can be replaced with a screwdriver or bolt extractor depending on what is holding the carburetor together. The choke shutter can then be replaced and tested to make sure it opens and closes properly. This genuine OEM choke shutter is durable and easy to install. It is made from durable metal and is sold individually.

The primer bulb is a small rubber component with a plastic adapter that forces fuel from the tank into the fuel line and then into the carburetor when pressed down. The carburetor is the part of the engine that mixes air and fuel. Most small engines will not start if the carburetor is dry. The primer bulb primes the engine before starting. It is pressed and released to create a vacuum that draws fuel into the intake fuel line that deposits the fuel into the carburetor, making it ready or primed for combustion. Over time, the primer bulb can lose its elasticity and crack, which will lead to the need for a replacement. Replacing the primer bulb can improve equipment performance drastically and can be completed in minutes. This part works with outdoor tools and equipment, including chainsaws, edgers, hedge trimmers, leaf blowers, and pole saws. It is compatible with specific products from Craftsman, Echo, Homelite, Husqvarna, MTD, Toro, and Walbro. It is an OEM part sourced directly from the manufacturer and is sold individually.