Tiller Control Cable

This is a durable rubber clutch cable that is used on lawn and garden tillers. It is used to connect the drive system to the clutch control arm in the equipment. It is an important component that controls the clutch to engage the machine. Over time, the clutch cable can break or become damaged and will need to be replaced. If a visual inspection shows that the clutch cable is broken, the first step is to remove the clutch handle. Take out the bolt on the cover plate for the arm. Take the old cable off of the handle and remove the cover plate. Loosen the screws so the old clutch cable can be removed. Remove the screws on the cover over the clutch and belt. Take off the old cable and attach the new one to the clutch. Tighten the screws and reassemble the parts and make adjustments before using the new cable.This clutch cable is a genuine OEM replacement component sourced directly from the manufacturer. It is sold as an individual part. This cable is compatible with tillers manufactured by MTD, Huskee, MasterCut, and Yard Machines.

This is a reverse cable that is used on many tillers. It's made of durable plastic and metal. The reverse cable is the component in a tool that allows the tiller to help disengage and engage the reverse drive function of the tiller. In some cases, the part will become frayed or broken and must be replaced. The cable also contains delicate connectors that can become damaged. If this occurs, the reverse cable itself will need a replacement. The cable can also become too stretched out and stop working correctly.If the reverse cable for a tiller is broken, stretched out, or otherwise damaged, a pair of pliers will be needed to replace the part. This is a simple repair that only takes a few minutes to handle. The frayed or damaged cable should be removed from the tiller so the new one can be installed in the same place. Before making the replacement, make sure the spark plug wire has been disconnected.This is an authentic OEM replacement component that is directly sourced from the manufacturer. The reverse cable is sold as an individual item. It is designed to be compatible with tillers manufactured by Yard-Man, Craftsman, Huskee, Cub Cadet, MTD, and Yard Machines.

This is a drive control cable that is used on a variety of Troy-Bilt tillers. The cable is made of durable materials and includes small metal connectors on each end of the cable. These connectors are delicate and may break or wear out when using the tiller. If this happens, the drive control cable will need to be replaced. The cable is an integral part of the tiller since it controls the speed of the tines that work through the earth. If the cable becomes damaged, the tiller may not start or keep the correct speed.If the cable itself or the end connectors are worn out or broken, the drive control cable should be replaced. No tools are required for the process, but a pair of work gloves will be useful. Untwist the original control cable to remove it from the machine. Place the new control cable into its place and reassemble any other parts.This drive control cable is sold as an individual component. It is an authentic replacement part that is sourced directly from the manufacturer. The cable is designed for use with several models of tillers manufactured by Troy-Bilt.

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part in a tiller. This part allows the user to control the momentum of the tiller.The control cable in a tiller could be pierced, ripped, torn, punctured, frayed, eroded, or warped to the point that it cannot serve its typical function for the tiller, and if this occurs, the control cable should be removed and replaced by this genuine OEM replacement part in accordance with a properly sourced set of instructions.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: Husqvarna.

The forward cable is used in yard and garden tillers. It is responsible for engaging the transmission which will cause the tiller to propel forward. It also works to rotate the tines in situations where the bail arm has been pulled toward the handle. If the forward cable starts to come loose or has lost proper tension, it may need to be tightening or replaced. This part will lose tension as time goes on, so making adjustments is part of its regular maintenance. However, a forward cable that is damaged or broken will need to be replaced. Work gloves should be worn when replacing the forward cable. Before replacement, the spark plug cap plug should be removed and the throttle lever needs to be pushed down. Next, remove the throttle lever, throttle cable clip, and then the forward cable. The new part can then be installed and the rest of the components replaced. This forward cable is created for use with Yard Man, Cub Cadet, MTD, Craftsman, Huskee, and Yard Machines tillers. It is an individual component that is genuine OEM and comes directly from the manufacturer. Various tools, including a screwdriver, pliers, and socket wrench may be needed for the replacement.

This clutch cable is part of the clutch assembly that controls the drivetrain in a tiller. When the clutch is engaged, the cable works with a spring to draw the clutch plate away from the flywheel. When the clutch plate is moved from the flywheel, forward movement occurs. Disengaging the clutch stops the forward motion. Normal wear and tear can cause the metal parts of the cable to rust or corrode. This replacement part is simple to install and requires very little time.A screwdriver, scissors, and wrench are needed to remove and install the new clutch cable. Empty the fuel tank and remove the spark plug before working on the clutch cable. Remove the gas tank. Locate the end of the clutch cable inside the clutch lever bracket. Pull the cable out and remove the spring attached to the end. Install the new cable, retracing the steps used to remove the old cable.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This clutch cable is designed to be compatible with tillers manufactured by Craftsman.

This high-quality drive control cable is used on wheeled trimmers and lawnmowers. The control cable is the part that causes the blade to stop when the control handle is released. It connects the drive control lever to the transmission so the equipment will move or stop when going across the lawn. If the cable is broken or becomes damaged, the brake will not release even if the lever is pressed. If the lawn equipment no longer stops or doesn't move when it should, the drive control cable likely needs to be replaced. Remove the spark plug wire from the spark plug and then release the cables from the handle. Take off the drive cover and remove the drive control cable. Once it has been removed, the new replacement part can be installed before reassembling the other components.This drive control cable is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part and includes a rubber insulated cable. This component is made for use with lawnmowers and string trimmers created by Poulan, Craftsman, Weed Eater, and Husqvarna.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.