Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Whirlpool WGD4616FW0: 02 - Top And Console Parts

Parts for Whirlpool WGD4616FW0: 02 - Top And Console Parts

Location on Diagram
Part Description
Price & Availability
2
Best Seller
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP693995

This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
3
Best Seller
Product photo
4.9 (16)
By: Whirlpool
Part Number: WP8312709

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

  • Loose console assembly that is not securely fastened  
  • Misaligned or dangling controls that do not sit flush
  • Dislodged console at risk of detaching from housing
  • Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$20.38

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
4
Product photo
By: Whirlpool
Part Number: WPW10416486

This rear panel replaces the dryer's back bulkhead to restore the appliance's structural enclosure and help protect internal components from dust and debris. It provides a clean mounting surface for internal parts and improves cabinet integrity. What it does:

  • Replaces a damaged, dented, or corroded rear cabinet panel
  • Protects internal wiring, ducts, and components from external debris
  • Restores proper mounting surfaces for internal assemblies and fasteners
  • Helps maintain correct airflow paths by sealing the dryer cabinet
What's included:
  • One rear panel/back bulkhead
Install notes:
  • Disconnect power (and gas if applicable) before beginning any repair
  • Installation typically requires removing the dryer cabinet and several fasteners; keep hardware for reuse unless damaged
  • Inspect and replace any worn gaskets, seals, or mounting clips while cabinet is open

More
$60.52

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
5
Best Seller
Product photo
4.9 (176)
By: Whirlpool
Part Number: WPW10717210

Captures lint during each cycle to maintain airflow and prevent overheating. Replace if torn, warped, or damaged. Verify fit using your model number.

More
$60.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
6
Best Seller
Product photo
4.9 (22)
By: Whirlpool
Part Number: WP8536939

This is a D-shaped knob insert or spring clip that fits inside a control knob and connects it to the control shaft on the dryer's front panel. It ensures the knob grips the shaft properly so you can turn the timer or selector. Replace this insert if your control knob spins freely without engaging the shaft or if the knob feels loose and won't stay in position.

More
$9.63

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
7
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
8
Product photo
5.0 (5)
By: Whirlpool
Part Number: W11693756

Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.

More
$12.54

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
9
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP8563663

Main top panel assembly that forms the finished top surface of your dryer. Replace if cracked, discolored, damaged, or worn to restore appearance.

More
$146.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
10
Product photo
By: Whirlpool
Part Number: WPW10453947

This knob assembly replaces the "modifier" control knob on the console so you can adjust settings smoothly and reliably again. Restore a secure, positive-turn feel when the original knob is cracked, stripped, or missing.

  • Attaches to the control shaft to select and adjust options/settings
  • Replaces knobs that are cracked, broken, or missing
  • Fixes a knob that spins freely, slips, or won't turn the control
  • Restores proper selection and tactile feedback during use
What's included: 1 knob assembly Install notes:
  • Disconnect power to the appliance before servicing
  • Pull the old knob straight off the shaft; avoid prying against the panel
  • Align the flat/splines on the new knob with the shaft and press on firmly until fully seated
  • The pointer aligns with the panel markings before use

More
$37.51

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
11
Best Seller
Product photo
5.0 (4)
By: Whirlpool
Part Number: WPW10436302

This is the timer assembly that controls the duration and sequencing of the dryer's various cycles, including heat, tumble, and cool-down phases. It connects to the timer knob on the control panel and uses a small motor to advance through the cycle. Replace this timer if the dryer won't start, won't advance through cycles, runs continuously without shutting off, or if the timer knob turns but nothing happens.

More
$151.67

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
13
Best Seller
Product photo
5.0 (2)
By: Whirlpool
Part Number: WPW10711289

This is a control knob used on dryers, typically for the timer or cycle selector. It attaches to the timer shaft and allows you to select drying cycles and settings. Replace this knob if it is cracked, broken, or if the D-shaped mounting hole has worn out, causing the knob to spin freely without engaging the timer shaft.

More
$9.63

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
14
Best Seller
Product photo
5.0 (6)
By: Whirlpool
Part Number: WPW10446920

Dryer won't start when you press the button? A faulty push-to-start switch prevents the motor signal. Simple DIY fix in under 30 minutes.

More
$64.70

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
15
Product photo
By: Whirlpool
Part Number: 3389682

The dryer toe panel spacer provides proper alignment and spacing for the front bottom panel of the dryer. Replace when the toe panel is loose, misaligned, or there are visible gaps at the bottom of the dryer.

More
$4.96

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
16
By: Whirlpool
Part Number: W10450291
$85.99

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
17
By: Whirlpool
Part Number: W10112578
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

18
By: Whirlpool
Part Number: W10112603
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

19
By: Whirlpool
Part Number: W10316616

This is a foam seal that fits along the control panel area of a dryer, creating a barrier against moisture, lint, and air leaks. It helps protect internal control components from heat and debris. Replace this seal if it is cracked, compressed, or missing, which can allow lint buildup near controls or cause air leaks that reduce drying efficiency.

More
$17.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
20
Product photo
By: Whirlpool
Part Number: W11213336

Replacement mounting nut secures panels, brackets, and studs in dryers. Restores tight fit for worn, stripped, or missing fastening hardware.

More
$4.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
21
Product photo
By: Whirlpool
Part Number: W11661755

This replacement switch restores reliable electrical switching for the circuit it controls in your appliance, so the connected feature responds consistently when actuated. Worn or heat-damaged contacts can cause intermittent operation, no response, or a function stuck on/off.

  • Opens and closes an electrical circuit to signal a control or provide power to a component
  • Helps ensure the controlled feature turns on/off at the correct time
  • Symptoms can include no response when actuated, intermittent operation, or a function that remains on/off
  • Physical clues may include loose terminals, arcing, or burned contacts on the original switch
What's included: 1 switch
  • Disconnect power before servicing; for gas appliances, also shut off gas supply
  • Access and mounting location vary by model; remove panels as needed to reach the switch
  • Photograph wiring and transfer leads one at a time to matching terminals; avoid pulling on wire insulation
  • Secure the switch, restore power, and test the function for proper operation

More
$20.23

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
22
Product photo
5.0 (3)
By: Whirlpool
Part Number: WP694419

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

  • Produces audible tones for cycle end, timers and other appliance notifications
  • Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
  • Helps you hear and identify completed cycles and timed alerts
  • Small, mountable unit that fits behind the control panel and connects to the control board
What's included:
  • One adjustable buzzer kit
Install notes:
  • Disconnect power before servicing to avoid shock risk
  • Access may require removing the control panel; keep fasteners organized for reassembly
  • Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
  • Test buzzer function with power restored before fully reassembling

More
$71.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
23
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google