Parts for Lg T1743HDFSP: Top Cover Assemb Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Protective cover for washer control panel or component housing. Replaces cracked, broken, or missing covers. Shields internal parts from damage.

This rear cabinet panel replaces the damaged or worn outer back cover on your appliance, restoring structural protection and keeping internal components shielded from dust and debris. It helps maintain safe operation and appliance appearance. What it does:

• Covers and protects internal components at the back of the appliance
• Prevents dust, dirt, and small objects from entering service areas
• Restores proper airflow paths and enclosure integrity when the original panel is dented or missing
• Reduces vibration noise caused by loose or damaged rear panels

• Disconnect power (and water supply if applicable) before beginning any repair
• Use appropriate fasteners and torque to secure the panel; do not overtighten to avoid cracking
• If sharp edges are present, wear gloves and eye protection during installation

The Lid Assembly is an OEM part part for LG washing machines. The lid includes all necessary components that provide an effective barrier during washing cycles.

Causes of a bad lid assembly can be cracks or breaks from repeated use, damaged hinges that affect proper sealing, or missing gaskets that compromise water tightness.

Symptoms of failure include:

• Water leaks from around the lid during operation
• Inability to securely close or lock the lid in place
• Excessive noise or rattling from a loose fitting lid

This OEM LG part is also compatible with some Kenmore models.

This display power control board assembly replaces a failed control module that powers and manages the appliance display and touch/interface functions, restoring normal panel operation and status readouts. What it does:

• Supplies power and control signals to the front display and user interface
• Restores display illumination and readable status indicators when the panel is dark
• Helps resolve unresponsive touch controls or buttons tied to the display module
• Clears display-related errors when a faulty board is replaced

• Disconnect all power to the appliance before accessing the control panel to avoid shock or damage
• Handle the board carefully and avoid static discharge; ground yourself or use an ESD strap
• Verify the part number on your existing board matches before installation

Replace your washer's cracked, damaged, or worn top cover panel. Restores a clean finish and protects internal components. Mounts over the frame.

Secures internal washer components in proper alignment. Replace this mounting bracket if cracked, rusted, broken, or missing to restore stability.

Secures internal components to the washer frame. Replace if your bracket is cracked, rusted, broken, or missing to restore stable support and alignment.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replaces the worn, cracked, or missing cap that covers the fabric softener chamber in your washer dispenser. Restores proper containment and function.

Fix detergent not dispensing or a cracked drawer with this washer detergent dispenser. Slides out for easy replacement in most front-load models.

This noise filter assembly is an electronic component that suppresses electromagnetic interference generated by the washer's motor and control board. It is typically mounted near the power inlet and helps protect other household electronics from electrical noise. Replace this assembly if your washer fails to start, trips a breaker, or if the filter housing appears burned or damaged.

Secures hose connections to maintain watertight seals in your washer. Replace if you notice leaks or loose hoses during operation. Verify fit with model number.

Molded trim piece that shields and supports the washer guide track assembly. Replace if cracked, broken, or missing to maintain smooth alignment.

Fix detergent leaks or dispenser jams with this washer detergent housing assembly. Routes detergent properly and replaces cracked or warped housings.

Replace a cracked or clogged washer nozzle assembly to restore proper water flow and prevent poor cleaning performance. Moderate DIY repair.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

Fix a leaking or cracked fabric softener dispenser with this washer softener cap. Easy DIY repair with no tools needed—just remove and replace in minutes.

This small cover cap conceals an exposed fastener or opening on your appliance, restoring a clean, finished look. It also helps protect the area from dust and splashes for a tidy, long-lasting installation.

• Covers and protects an open screw hole or attachment point on a panel or door
• Restores a clean, factory appearance
• Helps keep dust and moisture out of the opening
• Common signs it's needed: missing cap, cracked/broken cap, loose cap, won't stay clipped

• Disconnect power (and water, if applicable) before servicing exterior panels or doors
• Note the cap's orientation and any retaining tabs before removal
• Use a plastic pry tool to gently release the old cap; press the new cap until fully seated
• Avoid forcing the cap or overtightening any underlying fastener to prevent damage

Dispenses detergent, softener, and bleach during wash cycles. Replace if cracked, clogged, or disintegrated. Confirm fit with your model number.

Fix dispenser overflow or leaking issues with this washer detergent drawer assembly. Channels water through detergent and softener compartments. DIY repair.

Connects water inlet valve to tub in your washer. Replace if cracked, leaking, or ports are stripped. Ensures secure, leak-proof connection during cycles.

Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Washer won't fill or won't stop filling? This water inlet valve controls water flow into the tub. DIY-friendly repair, typically takes 10-15 minutes.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.